The concentration of NaOH used is 0.125 M to neutralize 2.00 L of a solution of NaOH.
Given information.
Volume of H₂SO₄ = 0.25 L
Concentration of H₂SO₄= 2 M
Concentration of NaOH = 2 L
From the balanced chemical equation: 2 NaOH + H₂SO₄ → Na₂SO₄ + 2 H₂O
The stoichiometric ratio between NaOH and H₂SO₄ is 2:1. This means that for every 2 moles of NaOH, 1 mole of H₂SO₄ is required for complete neutralization.
Moles of H₂SO₄ = volume (in L) × concentration (in M)
= 0.25 L × 2.00 M
= 0.50 moles of H2SO4
According to the stoichiometry of the reaction, since the ratio between NaOH and H₂SO₄ is 2:1, the number of moles of NaOH used is half of the moles of H₂SO₄ used:
Moles of NaOH = 0.50 moles of H2SO4 / 2
= 0.25 moles of NaOH
The concentration of NaOH = Moles of NaOH / Volume of NaOH
= 0.25 moles / 2.00 L
= 0.125 M
Learn more about neutralization, here:
https://brainly.com/question/14156911
#SPJ1
A chemist determines that a substance is composed of 30.4% nitrogen by mass and 69.6% oxygen by mass. The molar mass of the compound is 230.5 g/mol.
A chemist determines that a substance is composed of 30.4% nitrogen by mass and 69.6% oxygen by mass. The molar mass of the compound is 230.5 g/mol, the molecular formula is NO₂.
We must compute the empirical formula in order to ascertain the compound's chemical composition.
If we have 100 grams of the compound.
This suggests we have:
30.4 g of nitrogen
69.6 g of oxygen
Now, we have to convert the mass of each element to moles.
The molar mass of nitrogen (N) = 14.01 g/mol
the molar mass of oxygen (O) = 16.00 g/mol.
Number of moles of nitrogen (N):
2.17 mol
Number of moles of oxygen (O):
4.35 mol
The simplest whole-number ratio between the moles of nitrogen and oxygen must now be determined. To calculate the ratio, we divide both numbers by the smaller value.
Moles N / moles O = 2.17 mol / 2.17 mol = 1.00
Moles O / moles O = 4.35 mol / 2.17 mol = 2.00
The ratio is approximately N₁O₂.
We divide the subscripts by their greatest common divisor to obtain the simplest ratio, since we are looking for the empirical formula. The empirical formula is NO₂ since the greatest common divisor in this situation is 1.
The molecular formula of the compound is NO₂.
Learn more about molecular formula, here:
https://brainly.com/question/11203434
#SPJ1
2.
3.
S
6.
7.
19.
8.
9.
4. _HCI+
10 Na
10.
11.
15.
16.
Practice: Balancing Equations #1
Show all work on a separate sheet of paper Place coefficient final answers in the blanks provided.
The balance equations would be;
1) 2H₂ + O₂ → 2H₂O 2) H₃PO₄ + 3KOH → K₃PO₄ + 3H₂O
3) 6K + B₂O₃ = 3K₂O + 2B 4) HCl + NaOH → NaCl + H₂O
5) 2Na + 2NaNO₃ → 2Na₃O + N₂ 6) 4C + 2S₈ → 4CS₂
7) 2Na + O₂ → Na₂O₂ 8) N₂ + 3O₂ → 2N₂O₃
9) H₃PO₄ + 2Mg(OH)₂ → Mg₃(PO₄)₂ + 6H₂O
10) NaOH + H₂CO₃ → Na₂CO₃ + H₂O 11) KOH + HBr → KBr + H₂O
12) 2H₂ + 2O₂ = 2H₂O₂ 13) 4Na + O₂ → 2Na₂O
14) 2Al(OH)₃ + 3H₂CO₃ → Al₂(CO₃)₃ + 6H₂O 15) 4Al + 3S₈ → 2Al₂S₃
16) 6Cs + N₂ → 2Cs₃N 17) Mg + Cl₂ → MgCl₂
18) 8Rb + 2RbNO₃ → 5Rb₂O + N₂ 19) C₄H₄ + 5O₂ → 4CO₂ + 2H₂O
20) N₂ + 3H₂ → 2NH₃
How do you balance balance chemical equation?To balance a chemical equation, ensure that the total number of compounds on the left side is the same as the total number on the right side. Let balance equation 11
11. ......KOH + ..... HBr → .....KBr + ....H₂O
There are 2 H on the left which reflects on the right side. It means that the equation is perfect as it is KOH + HBr → KBr + H₂O; unless you want to add more number to the compound.
if we add 2KOH + 2HBr ⇒ 2KBr + 2H₂O
there are 2K, 2O, 4H , 2Br on the right we have 2k 2Br 4H and 2O
Find more exercises on balancing equation;
https://brainly.com/question/12192253
#SPJ1
Some underwater welding is done via the thermite reaction in which rust (Fe2O3) reacts with aluminum to produce iron and aluminum oxide. In one such reaction, 248g of aluminum and excess rust produced 464g of iron. What was the percent yield of the reaction?
The percent yield of the reaction is approximately 90.80%. To determine the percent yield of the thermite reaction, we need to compare the actual yield (464g of iron) with the theoretical yield, which can be calculated based on the stoichiometry of the reaction.
To determine the percent yield of the thermite reaction, we need to compare the actual yield (464g of iron) with the theoretical yield, which can be calculated based on the stoichiometry of the reaction.
First, let's calculate the molar masses of the substances involved:
Aluminum (Al): 26.98 g/mol
Rust (Fe2O3): 2*(55.85 g/mol) + 3*(16.00 g/mol) = 159.69 g/mol
Iron (Fe): 55.85 g/mol
Next, we'll determine the moles of aluminum used in the reaction:
Moles of aluminum = mass of aluminum / molar mass of aluminum
Moles of aluminum = 248g / 26.98 g/mol = 9.19 mol
Since there is excess rust, the moles of iron produced will be equal to the moles of aluminum used.
Therefore, the theoretical yield of iron is:
Theoretical yield = moles of iron * molar mass of iron
Theoretical yield = 9.19 mol * 55.85 g/mol = 511.15 g
Now we can calculate the percent yield:
Percent yield = (actual yield / theoretical yield) * 100
Percent yield = (464g / 511.15g) * 100 = 90.80%
For more such questions on thermite
https://brainly.com/question/14975508
#SPJ11
What is the freezing point, in °C, of a 0.41 m solution of C5H4 in benzene?
Answer: 3.4008
Explanation:
Answer: 3.4008
To determine the freezing point of the solution, we need to use the freezing point depression equation:
ΔT = Kf * m
Given:
Kf (benzene) = 5.12 °C/m
m = 0.41 m
Substituting the values into the equation:
ΔT = 5.12 °C/m * 0.41 m
ΔT = 2.0992 °C
To find the freezing point, we subtract the freezing point depression from the freezing point of the pure solvent (benzene). The freezing point of benzene is 5.5 °C.
Freezing point = FP (benzene) - ΔT
Freezing point = 5.5 °C - 2.0992 °C
Freezing point = 3.4008 °C
Therefore, the freezing point of the 0.41 m solution of C5H4 in benzene is approximately 3.4008 °C.
If 37.4 L of oxygen (O2 ) reacts with hydrogen, how many liters of water vapor (H2O ) will be produced?
At what temperature in °C does 0.750 mol of an ideal gas occupy a volume of 35.9 L at a pressure of 1.13 atm (R = 0.0821atm*L/mol*K)
386°C
Explanation:The ideal gas law allows us to solve for different values of a gas.
Ideal Gas Law
In order to do ideal gas calculations, we make the assumption that gas behaves ideally. This means that gases move in completely straight lines, have perfectly elastic collisions, experience no IMFs (intermolecular forces), and have no volume. When we assume these characteristics, we get the equation:
PV = nRTIn this equation, P is pressure, V is volume, n is moles, R is the gas constant, and T is temperature. It is important to note that temperature is always given in Kelvin for the ideal gas law.
Solving For T
To solve for T, all we need to do is plug in the values we were given. The question states:
P = 1.13 atmV = 35.9 Ln = 0.750 molR = 0.0821atm*L/mol*KNow we just need to solve for T. For clarity, I will leave units out of this calculation.
1.13 * 35.9 = 0.750 * 0.0821 * TT ≈ 658.82 KThis means the temperature is about 658.82 Kelvin. Rounded for sig figs, this is 659K. However, the question asks for Celsius. So, we need to convert. To convert from Kelvin to Celsius, subtract 273.
659K = 386°CThe gas is at 386°C.
A sample of gas has a mass of 38.6 mg
. Its volume is 222 mL
at a temperature of 57 ∘C
and a pressure of 918 torr
. Find the molar mass of the gas.
The molar mass of the gas is 3.58 g/mol.
To find the molar mass of the gasWe can use the ideal gas law equation:
[tex]PV = nRT[/tex]
Where
P is the pressure in torrvolume (in milliliters)The number of moles is nR = 62.36 L torr/mol K, the ideal gas constantT is the temperature (in K)We can rearrange the equation to solve for n:
[tex]n = PV/RT[/tex]
We know the following values:
P = 918 torr
V = 222 mL
R = 62.36 L torr/mol K
T = 57°C + 273 = 330 K
To solve for n, we can enter these numbers into the equation:
n = (918 torr)(222 mL)/(62.36 L torr/mol K)(330 K) = 0.0108 mol
Now, we can use the definition of molar mass to find the molar mass of the gas:
molar mass = mass/number of moles
We know the following values:
mass = 38.6 mg = 0.0386 g
n = 0.0108 mol
We can plug these values into the equation to solve for the molar mass
molar mass = 0.0386 g/0.0108 mol = 3.58 g/mol
Therefore, the molar mass of the gas is 3.58 g/mol.
Learn more about ideal gas law here : brainly.com/question/12873752
#SPJ1
Look at the equation for a displacement reaction. Which substance is reduced in the reaction? Give the full name, not the symbols. pls help its due in a few days
Answer:
chlorine gas is reduced in the reaction.
electrons in 1.5 mol of electron
In 1.5 mol of electrons, the number of electrons can be calculated using Avogadro's number, which states that there are approximately 6.022 × 10^23 particles (atoms, molecules, or electrons) in one mole of a substance.
So, in 1 mole of electrons, there are 6.022 × 10^23 electrons.
To find the number of electrons in 1.5 mol of electrons, we can multiply the number of electrons in 1 mole by 1.5:
Number of electrons = 1.5 mol × (6.022 × 10^23 electrons/mol)
Calculating this expression gives:
Number of electrons = 9.033 × 10^23 electrons
Therefore, there are approximately 9.033 × 10^23 electrons in 1.5 mol of electrons.
To know more about mole:
https://brainly.com/question/30885025
#SPJ1
100 points!!!
And I’ll mark as brainliest!!
Tasks are in the picture.
In an acetic acid solution:
31.6 mL of 4.50 M sodium hydroxide must be added.The pH of the buffer is 4.86.0.00285 g of sodium propanoate must be dissolved.The pH of the buffer is 4.74.How to determine amount and pH?1. To make a buffer with pH = 5.00, have a ratio of
[tex]\frac{[A-]}{[HA]} = 10^{-5.50}[/tex] = 0.316.
The volume of sodium hydroxide needed:
V(NaOH) = (0.316 M - 0.200 M) / 4.50 M = 0.0316 L = 31.6 mL
Therefore, 31.6 mL of 4.50 M sodium hydroxide must be added to 250.0 mL of 0.200 M acetic acid solution to make a buffer with pH = 5.00.
2. The pH of the buffer is calculated as follows:
pH = pKa + log([tex]\frac{[A-]}{[HA]}[/tex])
= 4.76 + log(0.2/0.1)
= 4.86
Therefore, the pH of the buffer is 4.86.
3. The mass of salt that must be dissolved in 0.25 dm³ of 1 mol dm³ propanoic acid to give a buffer of pH 4.87:
[tex]\frac{[A-]}{[HA]} = 10^{-4.87}[/tex] = 0.0114
Therefore, the mass of acetate that must be dissolved:
Mass of acetate = (0.0114 mol dm³)(0.25 dm³) = 0.00285 g
Therefore, 0.00285 g of sodium propanoate must be dissolved in 0.25 dm³ of 1 mol dm³ propanoic acid to give a buffer of pH 4.87.
4. The pH of the buffer is calculated as follows:
pH = pKa + log([tex]\frac{[A-]}{[HA]}[/tex])
= 4.74 + log(0.1/0.1)
= 4.74
Therefore, the pH of the buffer is 4.74.
Find out more on pH here: https://brainly.com/question/26424076
#SPJ1
Is vinegar a lactic acid?
Urgent help pleasee
Question 7 (1 point)
The volume of a sample of gas doubled in a weather balloon. What happened to the
temperature?
It increased.
It remained constant.
It cannot be determined.
It decreased.
Answer:
the temperature increased
Describe the AIR MASSES that would affect the climates of
Florida.
Maine.
Montana.
texas
The AIR MASSES that would affect the climates of Florida : are maritime tropical air mass and the maritime polar air mass,
Maine : maritime polar air mass and maritime tropical air mass,
Montana : continental polar and maritime polar air masses.
Texas : maritime tropical air masses and continental tropical air masses
What is known as AIR MASSES?An air mass is described as a large body of air with generally uniform temperature and humidity.
An air mass's properties are determined by the region from which it originates. The likelihood that the air mass will take on characteristics of the surface below increases with the amount of time it spends over its source region.
Learn more about air mass at:
https://brainly.com/question/19626802
#SPJ1
A temperature rise of 3.30 ± 0.60 °C was measured when a reaction was carried out in a calorimeter with a heat capacity of 0.862 ± 0.012 kJ °C -1 .
The enthalpy change (Δ H ) was worked out as -2.84 kJ by using the equation:
Enthalpy change (Δ H ) = heat capacity ( c ) × temperature change ( T )
What is the root-squared error (in kJ) for Δ H ?
To calculate the root-squared error for ΔH, we need to consider the uncertainties associated with both the heat capacity (c) and the temperature change (T) in the equation.
Temperature change (T) = 3.30 ± 0.60 °C
Heat capacity (c) = 0.862 ± 0.012 kJ °C^(-1)
To calculate the root-squared error, we need to propagate the uncertainties using the formula:
(root-squared error)^2 = (partial derivative of ΔH with respect to c * error in c)^2 + (partial derivative of ΔH with respect to T * error in T)^2
The partial derivative of ΔH with respect to c = T
Error in c = 0.012 kJ °C^(-1)
The partial derivative of ΔH with respect to T = c
Error in T = 0.60 °C
Substituting the values into the formula:
(root-squared error)^2 = (T * error in c)^2 + (c * error in T)^2
= (3.30 °C * 0.012 kJ °C^(-1))^2 + (0.862 kJ °C^(-1) * 0.60 °C)^2
Calculating this expression:
(root-squared error)^2 ≈ (0.0396 kJ)^2 + (0.5172 kJ)^2
≈ 0.00157 kJ^2 + 0.2672 kJ^2
≈ 0.2688 kJ^2
Finally, taking the square root of the result:
root-squared error ≈ √(0.2688 kJ^2)
≈ 0.518 kJ
Therefore, the root-squared error for ΔH is approximately 0.518 kJ.
To know more about Heat capacity:
https://brainly.com/question/28302909
#SPJ1
Question: What volume of 4.50 M HCI can be
made by mixing 5.65 M HCI with 250.0 mL of
3.55 M HCI?
Approximately 0.157 liters or 157 milliliters of the 4.50 M HCl solution can be made by mixing the given solutions.
To determine the volume of 4.50 M HCl that can be made by mixing the given solutions, we can use the concept of the concentration-volume relationship:
C1V1 = C2V2
Where:
C1 = concentration of the first solution
V1 = volume of the first solution
C2 = concentration of the second solution
V2 = volume of the second solution
Let's assign the variables as follows:
C1 = 5.65 M
V1 = unknown volume (we'll solve for this)
C2 = 3.55 M
V2 = 250.0 mL = 0.250 L (since the volume is given in milliliters)
Now we can plug in the values into the equation and solve for V1:
(5.65 M)(V1) = (3.55 M)(0.250 L)
Dividing both sides of the equation by 5.65 M:
V1 = (3.55 M)(0.250 L) / 5.65 M
V1 ≈ 0.157 L
For more question on solutions click on
https://brainly.com/question/25326161
#SPJ11
How do the varying characteristics of Earth's atmospheric layers affect the types of wavelengths that are reflected back into space, absorbed or allowed to pass to Earth's surface?
The layers that make up the Earth's atmosphere has unique properties that influence the kinds of wavelengths that are reflected, absorbed, or permitted to pass through to the planet's surface. Three layers are troposphere, stratosphere, and mesosphere.
The troposphere, the first layer closest to the surface of the planet, is where the majority of the planet's weather is found. The temperature in this layer drops with altitude, and it is made up of greenhouse gases like carbon dioxide and water vapor.
The stratosphere, which contains the ozone layer, is the next layer. The sun's dangerous UV light is absorbed by ozone, keeping it from reaching the surface of the Earth.
Learn more about troposphere, here:
https://brainly.com/question/30827755
#SPJ1
Please help will give brainliest
What kind of phosphates Ca(OH)2 and NaOH are?
Both Ca(OH)₂ (calcium hydroxide) and NaOH (sodium hydroxide) are examples of strong bases.
What is a base?A base is a substance that can accept protons (H) or donate hydroxide ions (OH) in a chemical reaction. strong bases completely dissociate in water, releasing hydroxide ions.
In the case of Ca(OH)₂, when it is dissolved in water, it dissociates into calcium ions and hydroxide ions The hydroxide ions make it a strong base.
Similarly, NaOH, when dissolved in water, completely dissociates into sodium ions (Na+) and hydroxide ions (OH-), making it a strong base as well.
Learn more about strong bases at
https://brainly.com/question/29742628
#SPJ1
Please read the question and choose the correct answer. Thank you!
The ranking of the acids from weakest to strongest is Acid X < acid Z < acid Y.
Option A is correct
What is an acid?An acid is described as a molecule or ion capable of either donating a proton, known as a Brønsted–Lowry acid, or forming a covalent bond with an electron pair, known as a Lewis acid.
From the diagram, we can see that ranking of the acids from weakest to strongest is Acid X < acid Z < acid Y and this means that Acid X is the weakest acid, followed by Acid Z, and Acid Y is the strongest acid.
Learn more about acids at:
https://brainly.com/question/27915098\
#SPJ1
Use the information in the chart below to find the empirical for the compound. If the molar mass for the compound is 197.31 g/mol, what is the molecular formula for the compound?
Element
Percent Composition (%)
Barium, Ba
69.59
Oxygen, O
24.32
Carbon, C
6.09
If the molar mass for the compound is 197.31 g/mol the molecular formula of the compound will be BaCO₃. Molar mass of empirical formula (BaCO₃).
Molar mass = (1 × molar mass Ba) + (1 × molar mass of C) + (3 × molar mass of O)
Molar mass = (1 × 137.33 g/mol) + (1 × 12.01 g/mol) + (3 × 16.00 g/mol)
Molar mass = 137.33 g/mol + 12.01 g/mol + 48.00 g/mol
Molar mass = 197.34 g/mol
The molar mass of the empirical formula (BaCO₃) is approximately 197.34 g/mol.
To find the molecular formula, we need to divide the given molar mass (197.31 g/mol) by the molar mass of the empirical formula (197.34 g/mol) and round to the nearest whole number:
Molar mass ratio = molar mass of molecular / molar mass of empirical
Molar mass ratio = 197.31 g/mol / 197.34 g/mol = 0.9999
Rounding it to 1.
The molecular formula is the same as the empirical formula, which is BaCO₃.
Learn more about empirical formula, here:
https://brainly.com/question/29973048
#SPJ1
When evaluating a college or university, what is one thing to which the cost should be directly compared?(1 point)
average starting salary
acceptance rates
graduation rates
reputation
When evaluating a college or university, one important factor to which the cost should be directly compared is the average starting salary of graduates.
Return on Investment: The cost of attending a college or university is a significant financial commitment. By comparing the cost with the average starting salary of graduates, you can assess the potential return on investment.
Job Market Competitiveness: Comparing the cost to the average starting salary helps gauge the competitiveness of graduates in the job market. A higher starting salary suggests that the institution's programs and curriculum are aligned with industry demands, and employers value the skills and knowledge gained from attending that college or university.
Affordability and Financial Planning: Understanding the relationship between the cost and average starting salary helps in assessing affordability. If the cost is significantly higher than the expected starting salary, it may raise concerns about the financial burden and the ability to repay student loans.
It's important to note that while the average starting salary is a valuable metric, it should not be the sole factor in evaluating a college or university. Other factors such as the quality of education, reputation, available resources, faculty expertise, alumni network, and student support services should also be considered.
To know more about graduates:
https://brainly.com/question/13873823
#SPJ1
how to synthesize 2-benzyl pentanoic acid from acetoacetic ester?
If you're attempting to synthesize 2 benzyl pentanoic acid from acetoacetic ester, keep in mind that you can do so fairly quickly by following these simplified instructions:
Begin by dissolving your acetoacetic ester into anhydrous diethyl ether and adding benzyl bromide and sodium hydroxide to the mix. Stir it all together at room temperature for around thirty minutes before reacting it with hydrochloric acid so that any remaining solvent evaporates out of your crude mixture; Lastly refine your creation by recrystallizing it from ethanol until you have pure 2 benzyl pentanoic acid.What is acetoacetic ester?From its pungent free scent to its solid state at temperatures ranging from 118 120°C, acetoacetic ester (better known as ethyl acetoacetate) offers significant value for those working within organic synthesis.
As one of many potent ketones utilized by researchers around the globe its unique properties make it ideal for building complex molecules essential for modern medicine and more.
Learn about acetoacetic ester here https://brainly.com/question/31744037
#SPJ1
At standard temperature and pressure , if 25 moles of CH3 combust to give equal moles of CO2 formed will be
The balanced chemical equation for the combustion of [tex]CH_{3}[/tex] (methane) is:
[tex]CH_{4} + 2O_{2} = > CO_{2} + 2H_{2} O[/tex]
From the balanced equation, we can see that for every mole of [tex]CH_{4}[/tex] combusted, one mole of [tex]CO_{2}[/tex] is formed.
Given that 25 moles of [tex]CH_{3}[/tex] (methane) combust, we can assume that it refers to 25 moles of [tex]CH_{4}[/tex] since they have the same chemical formula.
Therefore, the number of moles of [tex]CO_{2}[/tex] formed will also be 25 moles, as the reaction produces an equal number of moles of [tex]CO_{2}[/tex].
Learn more about balanced equation, here:
https://brainly.com/question/7181548
#SPJ1
Alka was making tea in a kettle. Suddenly she felt intense heat from the puff of steam gushing out of the spout of the kettle. She wondered whether the temperature of the steam was higher than that of the water boiling in the kettle. Comment. (2)
It is likely that the temperature of the steam is higher than the temperature of the water boiling in the kettle. The intense heat felt by Alka from the puff of steam supports this observation.
In general, the temperature of steam produced from boiling water is higher than the temperature of the water itself. When water boils, it undergoes a phase change from a liquid to a gas, forming steam.
During this phase change, the water absorbs heat energy from the heat source, such as a stove or electric kettle, and converts it into the latent heat of vaporization.
The boiling point of water is 100 degrees Celsius (212 degrees Fahrenheit) at standard atmospheric pressure. At this temperature, the water molecules have enough energy to overcome the intermolecular forces and transition into the gaseous state.
However, steam is hotter than the boiling point of water because it contains additional heat energy in the form of latent heat. The heat energy absorbed during vaporization is stored as latent heat within the steam. As the steam gushes out of the spout of the kettle, it releases this latent heat energy, which can be felt as intense heat.
For more question on temperature click on
https://brainly.com/question/4735135
#SPJ11
Convert 80 moles of CH4 to particles of CH4
A unit of measurement called a mole is used to determine how much of a material there is. We must utilise Avogadro's number, which equals 6.022 x 1023 particles per mole, to convert moles to particles. The Avogadro constant is another name for this quantity.
We must multiply 80 moles of CH4 by Avogadro's number in order to transform it to particles. The computation looks like this: 80 moles x a particle density of 6.022 x 1023 per mole = 4.8176 x 1025 particles. 80 moles of CH4 are therefore equivalent to 4.8176 x 1025 particles.
Particles refer to the individual units, such as atoms or molecules, inside a material, whereas moles are the basic unit used to estimate the amount of a substance. Approximately 6.022 x 1023 particles per mole, or Avogadro's number, serves as a conversion factor between moles and particles.
Learn more about moles at:
https://brainly.com/question/30885025
#SPJ1
THIS IS SIENCE BUT THEY DIDNT HAVE A SCIENCE OPTION!!!
I need this right now btw .
“ DNA is a nucleic acid. Where is DNA primarily found in an animal cell? “
Answer:DNA, along with RNA and proteins, is one of the three major macromolecules that are essential for life. Most of the DNA is located in the nucleus, although a small amount can be found in mitochondria (mitochondrial DNA). Within the nucleus of eukaryotic cells, DNA is organized into structures called chromosomes.
Explanation: science
Chem hess’s law
Calculate AH for the reaction: C2H4 (9) + H2 (9) -> CaH6 c) from the following
Considering the Hess's Law, the enthalpy change for the reaction is -136.8 kJ.
Definition of Hess's LawHess's Law indicates that the enthalpy change in a chemical reaction will be the same whether it occurs in a single stage or in several stages. That is, the sum of the ∆H of each stage of the reaction will give us a value equal to the ∆H of the reaction when it occurs in a single stage.
∆H of the reaction in this caseIn this case you want to calculate the enthalpy change of:
C₂H₄ + H₂ → C₂H₆
which occurs in three stages, with their corresponding enthalpies:
Equation 1: C₂H₄ + 3 O₂ → 2 CO₂ + 2 H₂O ΔH = –1411 kJ
Equation 2: C₂H₆ + 3 1/2 O₂ → 2 CO₂ + 3 H₂O ΔH = –1560 kJ
Equation 3: H₂ + 1/2 O₂ → H₂O ΔH = - 285.8 kJ
Because of the way formation reactions are defined, any chemical reaction can be written as a combination of formation reactions, some going forward and some going back.
In this case, to obtain the enthalpy of the desired chemical reaction you need one C₂H₆ on product side and it is present in second equation on product side. So, it is necessary to locate the C₂H₆ invert it. When an equation is inverted, the sign of delta H also changes.
Then, you know that three equations with their corresponding enthalpies are:
Equation 1: C₂H₄ + 3 O₂ → 2 CO₂ + 2 H₂O ΔH = –1411 kJ
Equation 2: 2 CO₂ + 3 H₂O → C₂H₆ + 3 1/2 O₂ ΔH = 1560 kJ
Equation 3: H₂ + 1/2 O₂ → H₂O ΔH = - 285.8 kJ
Adding or canceling the reactants and products as appropriate, and adding the enthalpies algebraically, you obtain:
C₂H₄ + H₂ → C₂H₆ ΔH= -136.8 kJ
Finally, the enthalpy change for the reaction is -136.8 kJ.
Learn more about Hess's Law:
brainly.com/question/5976752
#SPJ1
Based on your graph, at what temperature would the solubility of potassium nitrate be 95 g/100 ml H202
Based on the graph, the temperature at which the solubility of potassium nitrate would be 95 g/100 ml H₂O is 55°C.
What is a solubility curve?A solubility curve is a graph that shows the relationship between the solubility of a substance and temperature.
It illustrates how the amount of solute that can dissolve in a given amount of solvent changes with variations in temperature.
Typically, a solubility curve is plotted with the concentration of the solute (usually in grams) on the vertical axis and the temperature (usually in degrees Celsius) on the horizontal axis.
Learn more about a solubility curve at: https://brainly.com/question/30511474
#SPJ1
How many moles of (NH4)2S would be dissolved in 250. mL of a 1.50 M solution?
a.) 6.00 mol
b.) 0.167 mol
c.) 0.375 mol
d.) 3.00 mol
Answer:
C:.375
Explanation:
PHYSIC
A particle with a charge of -1.24*10^-8 C is moving with instantaneous velocity V=(4.19*10^4 m/s)i + (-3.85*10^4 m/s)j
a) What is the force exerted on this particle by a magnetic field B=(2.80 T)i? Express the x , y , and z
components of the force in newtons separated by commas.
Fx, Fy, Fz = .... N
b)What is the force exerted on this particle by a magnetic field B=(2.80 T)k?
Express the x
, y
, and z
components of the force in newtons separated by commas.
Fx, Fy, Fz = .... N
When the magnetic field is in the x-direction, the force on the particle is only in the y-direction (Fy = 1.338 * 10^-4 N), while when the magnetic field is in the z-direction, the force is only in the y-direction (Fy = 1.457 * 10^-4 N).
To calculate the force exerted on the particle by a magnetic field, we can use the equation:
F = q * (V x B)
where F is the force vector, q is the charge of the particle, V is the velocity vector, and B is the magnetic field vector.
Given:
q = -1.24 * 10^-8 C (charge of the particle)
V = (4.19 * 10^4 m/s)i + (-3.85 * 10^4 m/s)j (velocity of the particle)
B = (2.80 T)i (magnetic field)
Let's calculate the force:
F = (-1.24 * 10^-8 C) * ((4.19 * 10^4 m/s)i + (-3.85 * 10^4 m/s)j) x (2.80 T)i
The x, y, and z components of the force are:
Fx = 0 N
Fy = 1.338 * 10^-4 N
Fz = -1.44 * 10^-4 N
To calculate the cross product, we use the following rules:
i x i = j x j = k x k = 0
i x j = k
j x k = i
k x i = j
j x i = -k
k x j = -i
Expanding the equation, we get:
F = (-1.24 * 10^-8 C) * [(4.19 * 10^4 m/s)(2.80 T)k - (-3.85 * 10^4 m/s)(2.80 T)j]
F = (-1.24 * 10^-8 C) * (11.692 * 10^4 T)m/s k + (10.78 * 10^4 T)m/s j
F = -1.44 * 10^-4 N k + 1.338 * 10^-4 N j
Now, let's calculate the force exerted on the particle by a magnetic field B = (2.80 T)k:
F = q * (V x B)
Given:
q = -1.24 * 10^-8 C (charge of the particle)
V = (4.19 * 10^4 m/s)i + (-3.85 * 10^4 m/s)j (velocity of the particle)
B = (2.80 T)k (magnetic field)
Using the same formula as before, we have:
F = (-1.24 * 10^-8 C) * [(4.19 * 10^4 m/s)i + (-3.85 * 10^4 m/s)j] x (2.80 T)k
Expanding the cross product:
F = (-1.24 * 10^-8 C) * (-2.80 T)(4.19 * 10^4 m/s)j
F = 1.457 * 10^-4 N j
Therefore, the x, y, and z components of the force are:
Fx = 0 N
Fy = 1.457 * 10^-4 N
Fz = 0 N
for such more questions on force
https://brainly.com/question/24719118
#SPJ8