A chemist dilutes a 1.0 ml sample of 2.0M KNO₃ by adding water to it. If the concentration of the solution that is obtained is 0.0080 m, then its volume is 250mL.
How do we calculate volume?Volume for the given equation will be calculated by using the below equation as:
M₁V₁ = M₂V₂, where
M₁ = molarity of KNO₃ = 2M
V₁ = volume of KNO₃ = 1mL
M₂ = molarity of final solution = 0.0080M
V₂ = volume of final solution = ?
On putting these values on the above equation, we get
V₂ = (2)(1) / (0.0080) = 250mL
Hence option (2) is correct.
To know more about molarity, visit the below link:
https://brainly.com/question/24305514
Answer:
B. 250 mL
Explanation:
Correct on Edge 2022!!!
Good luck everyone, you got this! Have a great day!
How many moles of water (H20) are produced when 2 moles of KMnO, react with plenty of HCI? Show work if can will give most points :) !!
I hope this helps, you can ask any questions for clarification
Why is the magnitude of the electron affinity for a given element smaller than the magnitude of the first ionization g
4Al + 3O2 --> 2Al2O3 coefficients
Answer:
coefficients: 4, 3, 2
Explanation:
what are the products for the following equation?
NaCl + H2O ->
Answer:
NaOH + HCI
Explanation:
yesssssssssssss
An atom is electrically neutral because
(a) neutrons balance out the protons and electrons.
(b) nuclear forces stabilize the charges.
(c) the number of protons and electrons are equal.
(d) the numbers of protons and neutrons are equal.
Answer:
c
Explanation:
neutrons have no charge
protons and electrons have opposite charges and balance each other out in equal numbers
Please helpI need help please show work!!
Answer:
≈32°C
Explanation:
1) the rule:
[tex]\frac{pV}{T}=const;[/tex]
2) according to the rule above the final temperature can be calculated as:
[tex]t_{final}=\frac{p_{init}}{p_{final}}*t_{init}; \ = > \ t_{final}=\frac{100}{300}*95=32.[/tex]
According to the Gay-Lussac's law, as volume is constant the temperature must be decreased to 31.6°C.
What is Gay-Lussac's law?Gay-Lussac's law is defined as a gas law which states that the pressure which is exerted by the gas directly varies with its temperature and at a constant volume.The law was proposed by Joseph Gay-Lussac in the year 1808.
The pressure of the gas at constant volume reduces constantly as it is cooled till it undergoes condensation .The law is given by the formula, V₁/T₁=V₂/T₂, which on substitution gives T₂=95×100/300=31.6 °C.The container in Gay-Lussac's law is considered to be rigid in contrast to the container present in Charle's law.
Thus, as per Gay-Lussac's law, as volume is constant the temperature must be decreased to 31.6°C.
Learn more about Gay-Lussac's law,here:
https://brainly.com/question/2683502
#SPJ7
Convert 7.6 × 105 cal to kiloJoules
How many nickel atoms are contained in a 92.02 mole sample
Answer:
By definition, and this is what Avogadro's constant tells you, 1 mole of nickel must contain 6.022⋅1023 atoms of nickel.
Explanation:
Which uses more energy?
Question 1 options:
Washing machine
Dryer
Answer:
What's surprising, however, is that a washing machine requires way less electricity than a dryer. An average cycle for a washing machine is 30 minutes. This appliance, which is a widely used Energy Star model, needs 500 watts per hour to run, which means it requires 250 Wh, or 2.25 kWh, to run for 30 minutes.
Answer:
[tex]I'm~here~to~help![/tex]
The correct option is B. Dryer, because a washing machine uses 1,200 or 3,000 watts on average, while a dryer uses 1,800 or 5,000 watts. That is a lot of watts!
is ironing clothes conduction, convection or radiation
Ironing clothes is Conduction.
What is Conduction?Conduction is one of the means of Heat transfer ,others includes
Convection RadiationConduction is the transfer of heat energy from one object to another object from particles in a hotter object to particles in a cooler object, For Example: Ironing clothes is conduction.
This is because The heat from the iron which transfers to the clothes is conduction.
Learn more on Conduction here:https://brainly.com/question/26864500
62. Write formulas for the following substances and
designate their physical states.
a. nitrogen dioxide gas
b. liquid gallium
c. barium chloride dissolved in water
d. solid ammonium carbonate
The formulas for the substances and designate their physical states as follows:
a. nitrogen dioxide gas NO₂(g)
b. liquid gallium GA (I)
c. barium chloride dissolved in water BaCI₂ (aq)
d. solid ammonium carbonate (NH₄) 2CO₃ (s)
What is chemical formula ?The term chemical formula is defined as an expression that presents the elements in a compound and the relative proportions of those elements.
If only one atom of a particular type is present, no subscript is used. For atoms that have two or more of a particular type of atom present, a subscript is written after the symbol for that atom.
It presents the constituent element and the number of atoms of each element present in one molecule of the compound. It also corresponds to the molecular mass of the compound.
Thus, The formula of nitrogen dioxide gas is NO₂(g).
To learn more about the chemical formula, follow the link;
https://brainly.com/question/29031056
#SPJ2
PLS HURRRRRRRRYYYY!!!!
Research a type of plant tropism not presented in the lessons. Create a meme below that name and describes the tropism.
In an ecosystem, plant tropism represented is phototropism which is towards the direction of light.
What is an ecosystem?Ecosystem is defined as a system which consists of all living organisms and the physical components with which the living beings interact. The abiotic and biotic components are linked to each other through nutrient cycles and flow of energy.
Energy enters the system through the process of photosynthesis .Animals play an important role in transfer of energy as they feed on each other.As a result of this transfer of matter and energy takes place through the system .Living organisms also influence the quantity of biomass present.By decomposition of dead plants and animals by microbes nutrients are released back in to the soil.
Learn more about ecosystem,here:
https://brainly.com/question/13979184
#SPJ3
A diverâs backup oxygen tank reads 900 mm Hg while on her boat, where the temperature is 27 degrees C. When she dives down to the bottom of an unexplored methane lake on a recently discovered moon of Neptune, the temperature will drop to -183 degrees C. What will the pressure in her backup tank be at that temperature?
Taking into account the Gay Lussac's law, the pressure in the backup tank at -183 °C is 270 mmHg.
Gay Lussac's lawGay Lussac's law establishes the relationship between the temperature and pressure of a gas when the volume is constant.
This law says that the pressure of the gas is directly proportional to its temperature: when there is a constant volume, as the temperature increases, the pressure of the gas increases. And when the temperature is decreased, gas pressure decreases.
Mathematically, Gay-Lussac's law states that the ratio between pressure and temperature has the same value:
[tex]\frac{P}{T} =k[/tex]
Studying an initial state 1 and a final state 2, it is fulfilled:
[tex]\frac{P1}{T1} =\frac{P2}{T2}[/tex]
Pressure in the backup tankIn this case, you know:
P1= 900 mmHgT1= 27 C= 300 K (being 0C= 273 K)P2= ?T2= -183 C= 90 KReplacing in the Gay-Lussac's law:
[tex]\frac{900 mH}{300 K} =\frac{P2}{90 K}[/tex]
Solving:
[tex]P2=90K\frac{900 mH}{300 K}[/tex]
P2=270 mmHg
Finally, the pressure in the backup tank at -183 °C is 270 mmHg.
Learn more about the Gay-Lussac's law:
https://brainly.com/question/4147359
Give the names for the following compounds:
a. Ag2O
b. Ca(OH)2
c. KClO3
d. NH4Cl
e. Fe2(CrO4)3
f. KClO
Answer:
b. CA(OH)2 - Calcium hydroxide
Ivana is studying insect life cycles. She placed a male and a female gnat inside a terrarium. The female gnat laid eggs. Ivana observed and recorded all of the stages she saw the eggs go through. Her results are shown in the table below.
Answer:
B. A gnat completes its life cycle in about 1 month.
Explanation:
Stage Time in Stage
egg 24 hours
larva 7 days
pupa 6 days
adult 2 weeks
Which of the following is a valid conclusion that Ivana can draw from her data?
A. Agnat generally does not live for more than 1 week.
B. Agnat completes its life cycle in about 1 month.
C. Agnat life cycle has more than five stages.
D. Agnat is a crustacean, not an insect.
What is the oxidation number of each element in PbO2
Answer:
+4
Explanation:
In PbO
2
, oxygen exhibits an oxidation number of −2 (since it's not a peroxide or superoxide).
Let the oxidation number of Pb be x. Then, for the compound to be neutral, the oxidation numbers of all atoms should add up to zero.
⇒x+(−2)+(−2)=0
x=+4
So the oxidation no. of Pb is +4.
The lead (Pb) oxidation number in [tex]\rm PbO_2[/tex] is +4, whereas the oxygen (O) oxidation number is -2.
The idea of oxidation number, also known as oxidation state, is used in chemistry to describe the potential charge that an atom would have if electrons were completely transported in a chemical bond or reaction. It is a valuable instrument for tracking electron distribution in a chemical or ion and understanding redox (oxidation-reduction) reactions. Understanding redox processes, which involve the transfer of electrons between reactants, requires an understanding of oxidation numbers.
Oxidation number of Pb is given as:
(+x) + 2(-2) = 0
x - 4 = 0
x = +4
To know more oxidation number, here:
https://brainly.com/question/29100691
#SPJ6
me need help...................!!!!!!!!!!!
Answer:
Explanation:
As the distance to the outermost electron of the Group 1 element increases, the amount of energy required to remove an electron decreases.
That's D
A: and C: are both incorrect for the same reason. Group 1 elements don't add electrons -- they try and give those electrons away.
B: all of the group one have only 1 valence electron,
1a. Review What holds the hydrogen and oxygen
atoms together in a water molecule?
Please help solve this I’ll award brainliesttt
Answer:
types of elements nacl MGS
behavior shared between atoms tranferred from one to another
properties high melting poin low melting point
example SI-o metal + non metal
example H-H only non metal elements
Explanation:
Distinguish between an acidic and a basic oxide.
(Select all that apply.)
A basic oxide is an oxide that reacts with acids.
An acidic oxide is an oxide that reacts with acids.
In a basic oxide, element forms covalent bonds with oxygen.
In an acidic oxide, element forms ionic bonds with oxygen.
In an acidic oxide, element forms covalent bonds with oxygen.
In a basic oxide, element forms ionic bonds with oxygen.
An acidic oxide is an oxide that reacts with bases.
A basic oxide is an oxide that reacts with bases.
Answer:
an acidic oxide reacts with bases and the seconf
A 6.39L balloon filled with gas is warmed from 239.3K to 305.9K. What is the volume of the gas after it is heated?
Answer:
69.271837183727718371
Toda [4 MARKS] GROUP D: HIGHER ABILITY (HA) 74.2073 Supp. Q.No. 25 केही वस्तुहरूको घनत्व तालिकामा दिइएको छ। उक्त तालिका अध्ययन गरी निम्न प्रश्नहरूको उत्तर दिनुहोस् । (Density of some substance is given in a table. Study the table and answer the following questions:) वस्तु (Substances) घनत्व (Density) X 11 gm/cm Y 8 gm/cm 2Z 0.9 gm/cm i. समान पिण्ड भएका तीनओटा मध्ये सबभन्दा कम आयतन कुन वस्तुको होला ? (Which substance will have least volume if equal masşes of all are taken?) ii. समान आयतन भएका तीनैओटा मध्ये सबभन्दा कम पिण्ड कुन वस्तुको होला ? (Which substance will have the least mass if equal volume of all are taken?) iii. कुन वस्तु पानीमा उविएला ? (Which one will float on water?)
Answer:
Explanation
substance X will have least volume because it has maximum density and using the relation volume inversly propotional to the density of a substance.
substance Z will have least mass beacause it has least density and using relation mass is directly proportional to the volume of a substance .
substance Z will float in water because its density is less than the water (1 gm/cm^3).
The buffer that is adjusted to control acid-base balance is ________. plasma protein hemoglobin phosphate buffer bicarbonate: carbonic acid buffer
The buffer that is adjusted to control acid-base balance is referred to as a bicarbonate buffer.
What is a Buffer?This consists of a weak acid and its conjugate base, or vice versa and resist changes in the pH of the solution.
The bicarbonate buffer is involved in acid-base homeostasis by removing CO2 and hydrogen ions, respectively, from the body.
Read more about Buffer here https://brainly.com/question/22390063
Which is the goal of technology?
to expand comprehension
to make life easier
to apply knowledge
to improve communication
Answer:
B. To make life easier.
Explanation:
Although all of the above makes sense, the answer should be B. because it is to help improve how we live.
I hope it helps! Have a great day!
Muffin~
The goal of technology is to make life easier.
What is goal?A goal is "an idea of the future or desired result that a person or a group of people envision, plan and commit to achieve".
What is technology?
Technology is "the use of scientific knowledge for practical purposes or applications, whether in industry or in our everyday lives".
Hence, the goal of technology is to make our life better.
To learn more about technology here
https://brainly.com/question/27354061
#SPJ2
how many units of NaOH are in 80 grams of NaOH
Answer:
0.17637 pounds
Explanation:
hope this help
The number of units of NaOH are in 80 grams is 12.046 x 10²³ Particles of NaOH.
What is Mole concept ?The mole, symbol mol, is the SI base unit of amount of substance.
The quantity amount of substance is a measure of how many elementary entities of a given substance are in an object or sample.
Formula to calculate number of Particles when weight of the sample is given ;
N = given weight / Molecular weight x Nₐ
= 80 / 40 x 6.023 x 10²³ Particles
= 12.046 x 10²³ Particles of NaOH
Hence, The number of units of NaOH are in 80 grams is 12.046 x 10²³ Particles of NaOH.
Learn more about Mole concept here ;
https://brainly.com/question/22540912
#SPJ2
In terms of drug development, rank the following microbes from most difficult (1) to least difficult (3):
Answer:
See below ↓↓↓
Explanation:
Helminths = 1 Most Difficult
Fungi = 2 Moderately Difficult [Option not given, but 2 is right answer]
Bacteria = 3 Least Difficult
help! this is science, Palmas is closer to the equator than Neuquén. Which location has a warmer air temperature and why?
Answer:
Palmas, because more energy is transferred from the sun directly to the surface and then from the surface to the air.
Explanation:
Hope this helps:)....if not then sorry for wasting your time and may God bless you:)
giving brainliest please help!
Answer:
pretty sure it is
2
1
2
3
1
2
Explanation:
Choose the general equation for a decomposition reaction.
Answer:
A decompositon reaction is a reaction that takes place when one reactant breaks down into two or more simpler substances. The decomposition reaction can be represented by the general equation: AB → A + B. Most of the decomposition reactions require an input of energy in the form of heat, light or electricity
Explanation:
please help
Which of the following diagrams shows how osmosis would affect a plant cell when placed in a solution with a lower solute concentration than its own?
A.
Diagram Y
B.
Osmosis is not dependent on solute concentration.
C.
Diagram Z
D.
Diagram X
Answer:
Diagram Z
Explanation:
A cell placed into a hypotonic solution will swell and expand until it eventually burst through a process known as cytolysis.
Answer:
Diagram Y
Explanation:
Osmosis is the passive movement of water molecules across (into or out of) a cell membrane. "Passive" means that the process occurs automatically without the need for chemical energy.
In the diagrams above, a plant cell is shown as it would appear in a solution with a solute concentration more than its own (X), a solution with a solute concentration equal to its own (Y), and a solution with a solute concentration less than it own (Z). The movement of water is toward the area of more solute concentration (and therefore less water concentration).
The answer, then, is Diagram Y.
(Trust me, I just did it)