Answer:
Explanation:
The average speed of the boat:
[tex]\bar{v}=\frac{s}{t}=\frac{3.6}{80}=0.045[/tex] km/min
But if you want to change the unit into m/s, you only take this way:
[tex]0.045 \frac{km}{min}=\frac{0.045\times 1000}{60}=0.75[/tex] in m/s.
The average speed of the boat will be approximately 0.75 m/s.
What is Average speed?
Average speed is the rate of change of change of distance covered with time.
Given is a boat that sails for 80 minutes and travels 3.6 Km.
Distance covered by the boat [ΔD] = 3.6 Km = 3600 m
Time taken [Δt] = 80 minutes = 80 x 60 = 4800 s
Now, we can calculate the average speed using the formula -
s = ΔD/Δt
s = 3600/4800
s = 36/48
s = 0.75 m/s
Therefore, the average speed of the boat will be approximately 0.75 m/s.
To solve more questions on Kinematics, visit the link below-
https://brainly.com/question/15467807
#SPJ2
What is refractive index?
[tex] \huge \mathbb \red{HEY \: THERE ♡}[/tex]
Refractive Index:The ratio of the sine of angle of incidence to the sine of angle of refraction in case of lens for light of a given colour and given pair of media is constant. Note** It is also called Snell's Law of Refraction. [tex] \mathsf \orange{\frac{sine \: i}{sine \: r} = constant}[/tex][tex] \huge \mathbb\pink{HOPE \: IT \: HELPS}[/tex]
true or false
a)we should play inside our classroom..........
b)curd is made from milk........
c) wa.........t.............
Answer:
a) we should play inside our classroom
Explanation:
A 75-W light bulb is turned on. It has an operating voltage of 120 V. (A)How much current flows through the bulb? (B)What is the resistance of the bulb? (C)How much energy is used each second?
Required Answer:
Given:
Power (P) = 75 W Voltage (V) = 120 V(A)
As we know that,
I = P/V↠ Current = 75/120
↠ Current = 0.625 A
(B)
R = V/IHere,
R is resistanceV is Voltage, and I is current↠ Resistance = 120/0.625
↠ Resistance = 192 Ω
(C)
Energy = P × tHere,
P is power T is time↠ Energy = 75 × 1
↠ Energy = 75 J
If electromagnetic radiation acted like particles in the double-slit experiment, what would be observed? (1 point)
O A series of light and dark bands would appear on the screen.
O Two bright bands would appear on the screen in line with the slits.
O The screen would remain dark because no radiation would reach the screen.
O One bright band would appear in the center of the screen.
If electromagnetic radiation acted like particles in the double-slit experiment, we would observe one bright band would appear in the center of the screen.
Bahavior of particles in double-slit experimentIn a double-slit experiment, single particles, such as photons, pass one at a time through a screen containing two slits.
The photons behave like wave and the constructive interfernce of the waves of these photons will generate a high amplitude wave seen as a bright band in the center of the screen.
Thus, if electromagnetic radiation acted like particles in the double-slit experiment, we would observe one bright band would appear in the center of the screen.
Learn more about double slit experiment here: https://brainly.com/question/4449144
Conceptual Example 14 provides useful background for this problem. A playground carousel is free to rotate about its center on frictionless bearings, and air resistance is negligible. The carousel itself (without riders) has a moment of inertia of 105 kg·m2. When one person is standing at a distance of 1.57 m from the center, the carousel has an angular velocity of 0.512 rad/s. However, as this person moves inward to a point located 0.507 m from the center, the angular velocity increases to 0.795 rad/s. What is the person's mass?
For one person standing at a distance of 1.57 m from the center, the carousel has an angular velocity of 0.512 rad/s, the person's mass is mathematically given as
m = 24.2 kg
What is the person's mass?Generally, the equation for the conservation angular momentum is mathematically given as
(I + m * r0^2) * w0 = (I + m * r^2) * w^2
Therefore
(105 + m * 1.78^2) * 0.517 = (105 + m * 0.524^2) * 0.841
m = 24.2 kg
In conclusion, the mass
m = 24.2 kg
Read more about Mass
https://brainly.com/question/4931057
What season would Texas be having at point D?
Answer:
Almost winter so fall
Explanation:
Hope this helps! Please let me know if you want me to elaborate more or think my answer is incorrect. Brainliest would be MUCH appreciated. Have a wonderful day!
2. Box A has 2x the mass of Box B. Compare the inertia of the 2 bodies.
Box A has 2x the mass of Box B so Box A has more inertia as compared to Box B.
Relationship between inertia and massMore the mass of an object, there is more inertia of the body. Thus, if mass of two bodies is same their inertia will also be same. Hence, inertia of A and B will be same as mass of both A and B are same.
So we can conclude that Box A has 2x the mass of Box B so Box A has more inertia as compared to Box B.
Learn more about inertia here: https://brainly.com/question/1140505
-What is the potential energy at point A?
-What is the kinetic energy at point A?
-What is the kinetic energy at point B?
-What is the potential energy at point D?
-What is the kinetic energy at point D?
Answer:
1560520156Explanation:
Assuming there is no friction or other force involved, recall that energy is conserved in a system as long as no external force acts on the system.
Using the data from point C, we can find out that the total energy of the system is 156 because [tex]E = K+Pe[/tex].
Since at point A the object doesn't move, it has Kinetic energy of 0, because [tex]K=\frac{1}{2} mv^2[/tex], therefore [tex]0=\frac{1}{2} m0^2[/tex]. However at point A it has maximum Potential energy, because [tex]Pe=mgh[/tex].
At point B, we can find the Kinetic energy by using [tex]E = K+Pe[/tex]. Substitute values:
[tex]156=104+K\\52=K[/tex]
At point D, the object has maximum kinetic energy and no potential energy, therefore it's the opposite of point A.
What are the essential components of successfully competing in the field events:
Power, technique, and timing
Power, speed, and strength
Technique, flexibility, and speed
None of the above
Answer:
Power, technique, and timing
Explanation:
I just did the quiz and it was correct!! Hope this helps!
The surface of a lake has an area of 15.5 km2. What is the area of the lake in m2?
Answer:
1.55 x 10⁷ m²
Explanation:
Unit conversion
km² → m² 1 km² = 10⁶ m²Solving
15.5 km² = 10⁶ x 15.5 m²155 x 10⁵ m²1.55 x 10⁷ m²Difine Ripple Factor
-,- ty!!
Answer:
The answer is in the picture above.
What is the magnetic flux going through a coil with 0.065 m2 area if the intensity of the magnetic field is 0.114 T.
Hi there!
[tex]\Phi _B = \int B \cdot dA[/tex]
φ = Magnetic Flux (Wb or Tm²)
B = Magnetic field strength (T)
A = Area (m²)
This equation includes a dot product, so this can be rewritten as:
[tex]\Phi _B = B A cos\theta[/tex]
In this instance, the field is parallel to the area, so cos(0) = 1.
Calculate the magnetic flux by plugging in the given values.
[tex]\Phi _B = BA = 0.114 * 0.065 = \boxed{0.00741 Wb}[/tex]
Two children are playing tetherball, in which a ball at the end of a cord spins around a pole. After a really good hit, the ball makes three complete revolutions in 2.0 s. What is the angular speed of the ball?
Answer:
3 pi R / s or 9.42 R/s or 540 degrees/sec
Explanation:
Ball covers 2 pi radians each rotation
2 pi * 3 R / 2 s = 3 pi R / s
the angular speed of the ball is 3 pi R / s or 9.42 R/s or 540 degrees/sec
What is angular speed ?Angular speed can be defined as the measures of speed of how fast the central angle of a rotating body changes with respect to time
Angular speed mainly implies how quickly the rotation of an object occur means it is described as the change in the angle of the object per unit of time.
To calculate the speed of a rotational motion the angular speed value need to be known, hence The angular speeds formula is used to calculate the distance traveled by an object in terms of rotation and revolutions per unit of time.
The unit of angular speed of an object is radian per second and Both angular speed, angular velocity are determined by using the same formula, angular velocity is vector quantity which describes both magnitude and direction.
For more details angular speed, visit
https://brainly.com/question/28439806
#SPJ2
Mrs. dela Vega had 27 students in her class last year and this year she had 30 students in her math class. What is the percent of difference?
A man is pushing a large box with a force of 44 newtons. He slides over a floor that has a sliding frictional force of 12 Newtons. What is the acceleration?
give an example of the 4 steps of the scientific method
Answer:
1) asking a question about something you observe, 2) doing background research to learn what is already known about the topic, 3) constructing a hypothesis, 4) experimenting to test the hypothesis
Answer:
1) make an observation that describes a problem - see something you can fix or improve and try to describe the problem like which type of vegetables does rabbit like
2) create a hypothesis - What do you think will happen - If the rabbit eat the lettuce than .........
3) test the hypothesis - Do your experiment with the variables and follow the procedures
4) draw conclusions and refine the hypothesis - see if your hypothesis was correct - In conclusion my hypothesis was not correct because.......
A single coil of wire, with a radius of 0.13 m is rotated in a uniform magnetic field such that the angle between the field vector and the area vector obeys θ=ωt. If the strength of the field is 3.746 T, and the angular frequency is 524.7 rad/s, what is the induced emf in the loop at t=1.16 s?
The magnitude of emf induced in the single coil of wire rotated in the uniform magnetic field is 0.171 V.
The emf induced in the loop is determined by applying Faraday's law of electromagnetic induction.
emf = N(dФ/dt)
where;
N is number of turns of the wireФ is magnetic fluxФ = BA
where;
B is magnetic field strengthA is the area of the loopemf = NBA/t
A = πr²
A = π x (0.13)²
A = 0.053 m²
emf = NBA/t
emf = (1 x 3.746 x 0.053)/(1.16)
emf = 0.171 V
Thus, the magnitude of emf induced in the single coil of wire is 0.171 V.
Learn more about induced emf here: https://brainly.com/question/13744192
Spring
The pulling force acting on an object is 350.0 N. It also is being affected by a 50.0 N
kinetic friction force. As a result, its acceleration is 3.0 m/s?, what is its mass?
A. 67 kg
B. 83 kg
C. 100 kg
D. 600 kg
E. 0.0 kg
If the gravitational force of the Farth nulling you"down" in th
Answer:
100 kg
Explanation:
Net force = 350 - 50 = 300 N
F= ma
300 N = m * 3 m/s^2
100 kg = mass
a true statement of
kinetic theory
Answer:
real kinetic theory means that kinetic energy
A toy car, with mass of 6 Kg, is pushed with a force of 10 N. If the toy car is in the grass with a coefficient of friction of 0.1 then what is the acceleration?
How far does it get pushed in 10 s?
The density of lead is 30.2g/cm^3.what is the value in kilograms per meter cube?
A karate expert breaks a stack of bricks with his bare hand. If the force applied is 520 newtons and the impact time is 5.0 × 10 seconds, what is the value of impulse
A.
0.26 newton seconds
B.
0.58 newton seconds
C.
1.82 newton seconds
D.
2.20 newton seconds
A karate expert breaks a stack of bricks with his bare hand. If the force applied is 520 newtons and the impact time is [tex] \sf{5.0 \times 10^{-4}} [/tex] seconds, what is the value of impulse ?
So, the value of impulse is (A). 0.26 newton seconds.
IntroductionHi ! Here, I will help you about the impulse. Impulse is described as a quantity which expresses the integral of the amount force respect to time. The amount of impulse will be proportional to the amount of force or time (the greater value of the force or the value of time, the value of impuls is greater too). The relationship between impulse, force, and time is expressed in this equation :
[tex] \boxed{sf{\bold{I = F \times \Delta t}}} [/tex]
With the following condition:
I = impulse that occurs (N.s)F = force that given (N)[tex] \sf{\Delta t} [/tex] = interval of the time (s) Problem SolvingWe know that :F = force that given = 520 N[tex] \sf{\Delta t} [/tex] = interval of the time = [tex] \sf{5.0 \times 10^{-4} \: s}[/tex]What was asked :
I = impulse that occurs = ... N.sStep by step :
[tex] \sf{I = F \times \Delta t} [/tex]
[tex] \sf{I = 520 \times (5.0 \times 10^{-4}} [/tex]
[tex] \sf{I = 2,600 \times 10^{-4}} [/tex]
[tex] \sf{I = 2.60 \times 10^3 \times 10^{-4}} [/tex]
[tex] \sf{I = 2.60 \times 10^{3 + (-4)}} [/tex]
[tex] \sf{I = 2.60 \times 10^{-1} = \boxed{0.26 \: N.s}} [/tex]
Conclusion :So, the value of impulse is (A). 0.26 newton seconds
A uniformly charged insulating rod is bent into the shape of a semicircle of radius R = 5 cm. If the rod has a total charge of Q = 3.10-9C, find the magnitude and direction of the electric field at O, the center of the circle.
Hi there!
We can begin by using Coulomb's Law:
[tex]E = \frac{kq}{r^2}[/tex]
k = Coulomb's Constant (8.99 × 10⁹ Nm²/C²)
E = Electric field strength (N/C)
r = distance from point (m)
q = charge (C)
Since this is a continuous charge, we must use calculus.
We can express this as the following:
[tex]q = \lambda L[/tex]
λ = Linear charge density (C/m)
L = Length of rod (m)
Now, since this is an arc, L = s (arc length). Additionally, we must find the differential elements of each:
[tex]dq = \lambda ds\\\\dq = \lambda rd\theta[/tex]
Our new equation is:
[tex]dE = \frac{kdq}{r^2}\\\\dE = \frac{k\lambda rd\theta}{r^2}[/tex]
However, we will only take the cosine component of the electric field since the vertical components will cancel out. (Electric fields are a vector). Therefore:
[tex]dE = \frac{k\lambda rd\theta}{r^2}cos\theta\\\\dE = \frac{k\lambda}{r}cos\theta d\theta[/tex]
Integrate. For a semicircle, the bounds will be from -π/2 to π/2.
[tex]E = \frac{k\lambda}{r}\int\limits^{\frac{\pi}{2}}_{-\frac{\pi}{2}}} {cos\theta} \, d\theta\\\\E = \frac{k\lambda}{r}sin\theta\left \|{\frac{\pi}{2}} \atop {-\frac{\pi}{2}}} \right. \\\\E = \frac{k\lambda}{r}(1 - (-1)) = \frac{2k\lambda}{r}[/tex]
We need to solve for λ, which is Q/ L:
[tex]\lambda = \frac{3.10 \times 10^{-9} C}{\pi (0.05)} = 1.9735 \times 10^{-8} \frac{C}{m}[/tex]
Now, plug and solve for the electric field strength:
[tex]E = \frac{2(8.99\times 10^9)(1.9735\times 10^{-8})}{0.05} = \boxed{7096.783 \frac{N}{C}}[/tex]
**A diagram was not provided, but if the hemisphere's focus was to the right, the electric field would be to the right, and etcetera.
Why is there two π in the formula of a mathematical pendulum (T=2π √l/g)?
Answer:
The π is from the initial formula of period T=2π/omega
2 moles of a monatomic ideal gas is placed under a piston in a cylindrical container. The piston can move freely up and down without friction and its diameter is 20 cm. A 50 kg weight i placed on the top of the piston. The initial temperature of the gas is 0°C. A. Calculate the absolute pressure in the container. B. Calculate the volume of the gas. D. Calculate the amount of work done by the gas during its expansion.
The absolute pressure in the container when the monatomic ideal gas is placed under a piston is 1.17 × 10⁵ pa
How to calculate pressure?The absolute pressure in the container will be:
= Po + mg/A
= 1.013 × 10⁵ + (50 × 9.8)/(π × 0.1²)
= 1.17 × 10⁵ pa
The volume of the gas will be:
= nRT/P
= 2 × 8 × 3.14 × (0 + 273)/(1.17 × 10⁵)
= 0.0388m³
The amount of work done by the gas during its expansion will be:
= 1.17 × 10⁵ × (0.053 - 0.0388)
= 1661J
Learn more about pressure on:
https://brainly.com/question/25736513
(a) In Coulomb scattering of 7.50-MeV protons by a target of 'Li, what is the energy of the elastically scattered protons at 90°? (b) What is the energy of the inelastically scattered protons at 90° when the 'Li is left in its first excited state (0.477 MeV)?
Answer:
First the charge is given 7.50×10^-6
Explanation:
so that we have
[tex]90 [/tex]
so that their is no cross sectional area of this anglethen the direction is one is left and other one is right so thats my hint
15C of charge flow through the filament of a light bulb in 22 seconds. What is the strength of the current in the filament?
Answer:
Current(I)= charge(q)/time
I=15/22
I=0.680.68A
Explanation:
Current is flow of charge per unit time. Always make sure the time is in seconds. istthe
a boat travels 500 m down a strait river. if starts from the rest accelerates uniformly to a velocity of 5m/s. how long does this take?
PLSSSS HELPPPPP NOWWW!!!!!
Question 3 of 10
Which statement describes the law of conservation of energy?
A. Energy can only change from nuclear energy to chemical energy
B. There is only one form of energy.
C. The total energy in a system can only increase.
D. When an energy transformation happens, no energy is destroyed
or created.
Answer: D
Explanation: not A because energy can also change from chemical to mechanical or nuclear to mechanical. Not B because there are many types of energy eg, mechanical, nuclear, chemical... Not C because The total energy of a system is constant(conservation of energy).
Yesterday you walked 20 meters to the right from your house to the bus stop, which took you 20 seconds. You waited at the bus stop for 1 minute before realizing you forgot your Mathematics homework at home. You ran back to your house in 5 seconds. It took you 10 seconds to find your homework, and then you ran back to the bus stop in 5 seconds just in time to catch the bus. What was your average velocity for the entire period of motion?
a.
0.2 m/s
b.
1 m/s
c.
100 m/s
d.
20 m/s
average velocity= tot displacement/total time
avg v = 20/(20+60+5+10+5)=20/100=0.2 m/s