a black mamba snake has a length of 2.60 m and a top speed of 4.50 m/s. suppose a mongoose and a black mamba find themselves nose to nose. in an effort to escape, the snake accelerates past the mongoose at 8.37 m/s2 from rest.

The two types of simple machine make up this compound machine are  the screw and the lever.

A screw is a simple machine that consists of a spiral groove or ridge, called a thread, wrapped around a cylinder or cone. When the screw is rotated, it can be used to hold two objects together or to lift an object by turning it into a threaded hole.

Therefore, A lever is a simple machine that consists of a rigid bar that pivots on a fixed point, called a fulcrum. A force applied to one end of the lever can be used to lift or move an object at the other end. Lever can be classified into three classes depending on the position of the load, effort and fulcrum.

Learn more about simple machine from

https://brainly.com/question/30111143

#SPJ1

x-component: 0 lb (there is no force acting in the x-direction)

y-component: 0 lb (there is no force acting in the y-direction)

z-component: 80 lb (this is the vertical force acting on the crankshaft)

x-component: -80 lb (this is the horizontal force P that must be applied to the handle in the opposite direction to achieve equilibrium)

y-component: 0 lb (there is no force acting in the y-direction)

z-component: 0 lb (there is no force acting in the z-direction)

Part A:

To determine the horizontal equilibrium force P that must be applied to the handle, we need to consider the forces acting on the crankshaft. The only force acting on the crankshaft is the vertical force of 80 lb, which means that a horizontal force P must be applied to the handle in the opposite direction in order to achieve equilibrium. Therefore, P = -80 lb (the negative sign indicates that the force is in the opposite direction).

Part B:

The x, y, and z components of force at the smooth journal bearing A are as follows:

x-component: 0 lb (there is no force acting in the x-direction)

y-component: 0 lb (there is no force acting in the y-direction)

z-component: 80 lb (this is the vertical force acting on the crankshaft)

Part C:

The x, y, and z components of force at the thrust bearing B are as follows:

x-component: -80 lb (this is the horizontal force P that must be applied to the handle in the opposite direction to achieve equilibrium)

y-component: 0 lb (there is no force acting in the y-direction)

z-component: 0 lb (there is no force acting in the z-direction)

Note: The above is based on the assumption that the bearings are properly aligned and exert only force reactions on the shaft.

Learn more about CrankShaft Force Components here:

https://brainly.com/question/2519513

#SPJ4

In order to collect data to find an object's gravitational and inertial mass, meterstick and timer are two essential measuring devices that are needed.

Using the angular frequency value (w), inertial mass (m) is determined using the equation below:

w=√k/m

The equation above is solved for mass (m).

m=k/w²

To calculate the gravitational mass, following equation is used:

force gravity =  G  ×  M  ×  m / radius²

Where: mass, m, is 1 kilogram; mass of the Earth, M, is 6.0 × 1024 kilogram; the radius of the Earth (separation of masses), r, is 6.4 × 106 m; and G is 6.67 × 10⁻¹¹ newton square metrekilogram-2}.

To know more on gravitational and inertial mass visit :

https://brainly.com/question/13163709

#SPJ4

A charged particle will not follow a field line if it is subjected to an external force that is greater than the force of the electric field.

Electric field is an area of influence created by an electric charge. It is a vector field that surrounds a charged particle or object and exerts a force on other charged particles or objects in its vicinity. Electric fields are created by the movement of electrons and protons, which are both components of atoms. The strength of an electric field is determined by the amount of charge present, as well as the distance from the source.

For example, if a charged particle is subjected to a strong magnetic field, it will experience a Lorentz force which can cause the particle to deviate from its original trajectory and follow a curved path instead of following the field line.

To learn more about electric field
https://brainly.com/question/30144963
#SPJ4

We know that (momentum after) = (momentum before)

We remember that (Momentum) = (mass) x (speed)

Mass of the flatcar = M

Mass of the boxcar = m

Speed of the flatcar before the collision = v

Speed of the two cars stuck together after the collision = v/3

Total momentum before the collision = M · v

Total momentum after the collision = (M + m) · (v/3)

Momentum is conserved. (Total after) = (total before)

(M + m) · (v/3) = (M · v)

Eliminate parentheses on the left.  Mv/3 + mv/3 = Mv

Divide both sides of the equation by v .  M/3 + m/3 = M

Multiply both sides of the equation by 3 .  M  + m = 3M

Subtract M from both sides of the equation.  m = 2M

The mass of the boxcar is 2 times the mass of the flatcar.

For the two securities that have distinct risks and returns, the appropriate measure is the A: standard deviation.

A standard deviation (symbol σ) is a measure of how disseminated the data is in relation to the mean. A low standard deviation indicates that data are clustered around the mean; while a high standard deviation shows that data are more spread out.

Standard deviation is used to measure and compare the two securities that have distinct risks and returns. So option A: standard deviation is the correct answer.

You can learn more about standard deviation at

https://brainly.com/question/475676

#SPJ4

The Energy equation for the pendulum at the lowest position will be  E(total low) = KE(Low) + ThE(low) and for soccer at maximum height E(high) = KE(high) + PE(max).

For a pendulum, at the lowest point, all the potential energy is converted into kinetic energy and the pendulum motion reaches its maximum velocity. Ignored air resistance. Therefore, no heat energy is generated. This means that all potential energy is converted into kinetic energy. Taking drag into account, the final energy is the sum of thermal energy and kinetic energy, so the sum of the two equals the potential energy of the tip.

E(total low) = PE(low) + KE(low) + ThE(low)

PE(low) = 0

so, E(total low) = KE(Low) + ThE(low) = PE(high)

For a soccer ball, the ball has a horizontal velocity component at its highest point and reaches a certain height. The top speed is slower than the initial speed. The total energy at the tip is therefore equal to the sum of the kinetic and potential energies. As in the previous case, the thermal energy is missing because we ignored the resistor.

E(high) = KE(high) + PE(max)

Therefore, the Energy equation for the pendulum at the lowest position will be  E(total low) = KE(Low) + ThE(low) = PE(high) and for soccer at maximum height E(high) = KE(high) + PE(max).

To learn more about total energy:

https://brainly.com/question/15576394

#SPJ4

The complete question is:

follow the example below (the figure attached) to write an equation and sketch a graphical model of energy in each situation. Write down the expanded total energy equation in the case of the pendulum at tje low position and for the soccer ball at its maximum height. Also, make the pie chart diagram of different forms of energy (PE, KE, and ThE).

Determine (a) the value of k in light of the fact that the particle has a velocity of +9 m/s at x=-3 m and rests at the origin.

The speed of a particle—real or hypothetical—in a medium because it transmits a pulse is known as the particle velocity. The meter per second (m/s) is the metric unit for particle speed. Most of the time, this pressure wave is longitudinal, such as with noise, but it may also be transverse, similar to the vibration of the a tight string.

You could understand the phrase "A particle in repose prefers to stay at rest" to mean that what a particle that isn't moving relative to a certain context aware tends to remain stationary relative to those same things.

To know more about velocity visit:

https://brainly.com/question/18084516

#SPJ4

This is a relation for pressure as a function of elevation z.

Pressure is a measure of the force that is applied over a given area. It is expressed in units such as pounds per square inch, atmospheres, or pascals.

Let the pressure at z be denoted by P(z) and the density at z be denoted by ρ(z).  
From the given relation, we have
$$\frac{dP}{d\rho}= c\rho^n$$
The given relation for pressure change across a differential fluid layer of thickness dz in the vertical z-direction is given as
$$dP = -g \rho dz$$
where g is the acceleration due to gravity.  
Substituting for $dP/d\rho$ in terms of $\rho$ from the first expression and integrating both sides with respect to $z$, we get:
$$P(z) - P(0) = -g \int_0^z \rho^{n+1} dz + C $$
where C is a constant of integration. Since $P(0)$ denotes the pressure at z=0, it can be written as:
$$P(z) = -g \int_0^z \rho^{n+1} dz + P(0) $$
This is a relation for pressure as a function of elevation z.

To learn more about pressure
https://brainly.com/question/26101731
#SPJ4

The prediction which is true about the center of mass of the two-object system immediately after the collision is option C. does not change.

The distinct location at which weighted precise location of the distributed mass adds to zero at any particular time is known as the centre of mass in physics. Here is where a force can be exerted to produce an accelerometers without also producing an angular momentum.

Momentum is conserved when there is collision among two objects . The ultimate momentum is indeed not zero because the beginning momentum is not. They can't indeed be at ease. One of the objects may be at rest following the collision.

The question is incomplete, find the complete question here

consider the situation in which the objects collide but do not stick together. which of the following predictions is true about the center of mass of the two-object system immediately after the collision?

A. it increases

B. it decreases

C. does not change

D. none of these

To learn more about centre of mass  here

brainly.com/question/29723658

#SPJ4

Answer: ch2.7 × 10.0m = 2.10 ÷ 1.40 sec

= ch.10.23.

Explanation:

The measured value of gravity 'g' can be found by plugging the given height and time into the formula h = 0.5*g*t^2. Solving for 'g' gives us a measured value of approximately 10.20 m/s^2.

You can calculate the measured value of gravity 'g' using the formula for motion under gravity, which is: h = 0.5*g*t^2. Here 'h' stands for height, 'g' for gravitational acceleration and 't' for time.

Given in the problem is h = 10.0 m, t = 1.40 s. Substituting these values in the formula, we get 10.0 = 0.5*g*(1.40)^2.

Solving for 'g', we find g ~ 10.204 m/s^2. Hence your measured value of 'g' is approximately 10.20 m/s^2.

https://brainly.com/question/20324590

#SPJ2

Following the receipt of these results, researchers will proceed to the control condition.

A condition in an experiment or research design that does not entail exposure to the therapy or intervention being studied. Thus, introducing a control condition helps researchers to compare how things are in the presence of an independent variable to how things would have been if an independent variable had not been present. Participants in an experimental condition are given a treatment or experience, but those in a control condition are not. The major method by which researchers achieve this level of control over extraneous factors across conditions is known as random assignment, which refers to the use of a random procedure to choose which people are evaluated in which situations.

Here,

After receiving these data, researchers will move on to the control condition.

To know more about control condition,

https://brainly.com/question/30258580

#SPJ4

In this case, the weight in air is 30.4 N and the weight in water is 17.0 N the density can be found using the formula:

density of object = (weight in air - weight in water) / volume of object

The volume of the statue is required to calculate the density using the formula:

density of object = (weight in air - weight in water) / volume of object

To determine the density of the ceramic statue, you can use the concept of buoyancy. The buoyant force on an object submerged in a fluid is equal to the weight of the fluid that is displaced by the object. This can be calculated using the equation:

density of object = (weight in air - weight in water) / volume of object

In this case, the weight in air is 30.4 N and the weight in water is 17.0 N. To calculate the volume of the object, you will need to measure it or have the information available. Once you have the volume, you can plug it into the above equation and calculate the density of the ceramic statue.

Learn more about buoyancy here:

https://brainly.com/question/19168433

#SPJ4

Factoring in everything we currently know about the history of the universe, our best estimate for the age of the universe is 13.8 billion years old. additionally, some scientists speculate that our universe is not the only universe that exists, but the only one we can gather evidence about. this idea is called Multiverse Theory .

The multiverse theory is the idea that there may be multiple universes existing in parallel to our own, with their own laws of physics, laws of nature, and potentially different versions of ourselves. The multiverse theory has been proposed by many scientists.

To learn more about Universe

brainly.com/question/9724831

#SPJ4

"Suppose you use the southern cross to determine that the south celestial pole appears 40 degrees above your horizon. Then you must be located at latitude 40 degrees south." The correct option is 4th.

The local sky's star heights are unaffected by longitude.

The celestial equator and celestial horizon would coincide. Now picture yourself on the Earth's equator, at 0° latitude. Here the celestial equator would pass through your zenith and the north celestial pole (NCP) would lie at the North Point of the horizon and have an altitude of 0°.

Degrees north (+) or south (-) of the celestial equator are used to measure declination. The Earth's Equator is projected onto the Celestial Sphere to create the Celestial Equator. By definition, the CE has a declination of 0 degrees.

To know more about latitudes:

https://brainly.com/question/21098820

#SPJ4

Answer:

True.

Explanation:

A synthesis reaction is a type of chemical reaction in which two or more substances combine to form a new compound. Methane (CH4) and oxygen (O2) can combine in a synthesis reaction to form carbon dioxide (CO2) and water (H2O). This reaction is exothermic and is the basis of combustion reactions.

The balanced equation for this reaction is:

CH4 + 2O2 -> CO2 + 2H2O

In this reaction, one methane molecule and two oxygen molecules combine to form one carbon dioxide molecule and two water molecules.

It's worth mentioning that methane is considered a greenhouse gas, and the combustion of methane releases carbon dioxide and water vapor into the air, which contribute to global warming and climate change.

The space between the polyethylene bar and the steel tube will be closed when the applied force P is 476.48 Pounds.

Hooke's Law is a principle in physics that describes the relationship between the applied force on an object and the resulting deformation of that object. The law states that, within the elastic range of deformation, the magnitude of the deformation (strain) is directly proportional to the magnitude of the applied force (stress).

To determine the force P at which the space between the polyethylene bar and the steel tube is closed, the relationship between the applied force and the resulting deformation of the polyethylene bar needs to be known. Since the polyethylene bar is in the elastic range of deformation, Hooke's Law can be used.

The deformation of the bar is given by:

δ = (Pd1) / (2πE(d1/2) ²)

Where:

δ = deformation (inches)

P = applied force (pounds)

d1 = diameter of the polyethylene bar (inches)

E = modulus of elasticity of the polyethylene (ksi)

The space between the polyethylene bar and the steel tube is closed when the deformation of the bar is equal to the difference in the inner diameters of the two tubes:

δ = d2 - d1

By substituting the given values and solving for P, the force at which the space between the polyethylene bar and the steel tube is closed can be found.

P = (2πE(d1/2)²×(d2-d1)) / d1

P = (2π200(4/2)² × (4.01-4)) / 4 = 476.48 Pounds

Therefore, the space between the polyethylene bar and the steel tube will be closed when the applied force P is 476.48 Pounds.

To know more about elastic range of deformation, visit:

brainly.com/question/15824434

#SPJ4

Midway between A and B is the position in its motion when is the object's potential energy at a maximum.

A body's mass is an inherent quality. Before the understanding of the atom and particle physics, it was widely considered to be tied to the amount of matter present in a physical body. A body's mass doesn't quite alter at any point in time.

Simply put, a mass-Earth-spring system is a spring device with a block hanging or fastened to the open end of the spring. The duration of any item moving in a simple harmonic motion may typically be determined using this system.

To learn more about potential energy  here

brainly.com/question/24284560

#SPJ4

While painting the top of an antenna 206 m in height, a worker accidentally lets a 1.30-L water bottle fall from his lunchbox, the increase in temperature of the water is approximately 0.48 degrees Celsius.

To find the increase in temperature of the water bottle.

To calculate the change in mechanical energy of the water bottle, we can use the following formula:

Δ[tex]E_{mech[/tex] = m × g × h

where m is the mass of the water bottle, g is the acceleration due to gravity (approximately 9.81 m/s²), and h is the height of the antenna (206 m).

Δ[tex]E_{mech[/tex] = 1.30 kg × 9.81 m/s² × 206 m

Δ[tex]E_{mech[/tex] ≈ 2605.646 J

Since the worker accidentally drops the bottle, we know that the change in mechanical energy is negative (lost energy).

Now, to find the increase in temperature (ΔT) of the water, we can use the formula:

Δ[tex]E_{int[/tex]  = m × c × ΔT

where Δ[tex]E_{int[/tex] is the change in internal energy (heat), m is the mass of the water bottle, c is the specific heat capacity of water (approximately 4186 J/(kg°C)), and ΔT is the increase in temperature we want to find.

Since the quantity of heat (Q) is equal to the magnitude of the change in mechanical energy (|Δ[tex]E_{mech[/tex]|):

|Δ[tex]E_{mech[/tex]| = m × c × ΔT

ΔT = |Δ[tex]E_{mech[/tex]| ÷ (m × c)

ΔT ≈ 2605.646 J ÷ (1.30 kg × 4186 J/(kg°C))

ΔT ≈ 0.48°C

Thus, the increase in temperature of the water bottle is approximately 0.48°C.

For more details regarding mechanical energy, visit:

https://brainly.com/question/29509191

#SPJ12

The speed of the truck just before braking is 23.24 m/s.

The speed of the truck before braking is calculated by applying the third kinematic equation as shown below.

v² = u² - 2as

where;

When the truck stops, the final velocity = 0

0 = u² - 2as

u²  = 2as

u = √2as

u = √ ( 2 x 6 x 45 )

u = 23.24 m/s

Learn more about initial speed here: https://brainly.com/question/24493758

#SPJ1

When a force of size F = 15 N is observed at an angle from the horizontal, its horizontal and vertical components are denoted by F cos and F sin, respectively.

Because the block's motion as well as the direction of the frictional force are in opposition to one another, friction produces negative work. Frictional energy may also be zero. For instance, if we attempt to push an extremely heavy block across a rough surface, the block remains stationary.

The cycle's pace tends to slow down due to an opposing force known as air resistance force, which acts in the opposite direction. The pressure as well as the air drag force are both referred to as horizontal forces when the direction is taken into account.

To know more vertical components about visit:

https://brainly.com/question/12444718

#SPJ4

The total energy stored in these vehicles in gigawatt-hours is 57.4 GWh.

Based on the given information, if 80% of the 5.4 million hybrid vehicles sold in the United States since 1999 are still in service, there are approximately 4.32 million hybrid vehicles currently in use. If the average energy stored in a hybrid vehicle battery is 1.5 kilowatt-hours (kWh), this means that the total energy stored in these vehicles is approximately 6.48 gigawatt-hours (GWh).

Similarly, if 90% of the 1.4 million plug-in electric vehicles sold in the United States since 2010 are still in service, there are approximately 1.26 million plug-in electric vehicles currently in use. If the average energy stored in a plug-in electric vehicle battery is 45 kWh, this means that the total energy stored in these vehicles is approximately 57.4 GWh.

Therefore, the total energy stored in the hybrid and plug-in electric vehicles still in service in the United States is approximately 63.88 GWh. This is a significant amount of energy that can be used for transportation and potentially for other energy needs as well.

Learn more about gigawatt-hours here:

https://brainly.com/question/29257947

#SPJ4

The term "spontaneous generation" is erroneous. Only life can give birth to more life. Airborne microbes can be detected.

A scientific experiment is any method that uses measurements and tests to confirm or deny a theory. A hypothesis is a notion that looks to be true but has yet to be confirmed, from which a study might be created. A basic experiment often addresses a "What would happen if...?" cause-and-effect inquiry. For example, you're wondering if misting a plant with water helps it develop faster. You get a sense of how the plant grows without being misted and then compare it to how it grows after being misted.

Here,

The phrase "spontaneous generation" is incorrect. Only life can create more life. Microbes in the air can be detected.

To know more about experiment,

https://brainly.com/question/29865934

#SPJ4

In the presence of cocaine, maximum transport velocity (Vmax) is unaffected, but the transporter's apparent affinity for dopamine is reduced

Cocaine has psychomotor stimulating effects similar to amphetamines and related compounds. It increases transmitter concentrations at both noradrenergic and dopaminergic synapses and also acts as an anesthetic. Evidence of effects on cellular action potentials suggests that cocaine affects both fast Na+ channels and repolarizing K+, but not Ca2+ channels. Cocaine is not seen to have an affect on Vmax. But it is seen that dopamine transporters decrease its affinity for dopamine in presence of cocaine.

To know more about Vmax visit:

https://brainly.com/question/2914538?referrer=searchResults

#SPJ4

The correct answer is B) Graphing the potential difference across the lightbulb as a function of the current through the lightbulb to see if there is a linear relationship.

An ohmic material is one that has a linear relationship between the current flowing through it and the potential difference across it. The resistance of an ohmic material does not change with the current flowing through it.

Therefore, the best way to analyse the data to determine if the lightbulb is ohmic or nonohmic is to graph the potential difference across the lightbulb as a function of the current through the lightbulb. If the graph is a straight line, it indicates that the lightbulb is ohmic. If the graph is not a straight line, it indicates that the lightbulb is nonohmic.

Learn more about Ohmic Resistance here: https://brainly.com/question/14566018

#SPJ4

Complete Question:

A teacher finds an old lightbulb in a supply room. The teacher asks a student to design a procedure to determine if the lightbulb is ohmic or nonohmic. The student plans to connect the light bulb to batteries of different emf and measure the potential difference across and the current through the lightbulb. Which of the following is the best way to analyse the data to determine if the lightbulb is ohmic or nonohmic?

A) Calculating the resistance for each pair of potential difference and current measurements, and then averaging all of the resistance values.

B) Graphing the potential difference across the lightbulb as a function of current through the lightbulb to see if there is a linear relationship.

C) Graphing the power of the lightbulb as a function of the potential difference across the lightbulb to see if there is a linear relationship.

D) Averaging all of the values of the potential difference and averaging all the values of the current and then calculating an overall value for resistance based on averages

The power required to do the same amount of work in three times the time is 19000 watts / 3 = 6333.33 watts.

What is power?

Power is a measure of the rate of energy transfer. It is the rate at which work is done or energy is converted from one form to another. Power is typically measured in watts, which is equal to one joule of energy per second. Power is an important concept in physics, as it can be used to calculate the amount of work done, the amount of energy transferred, or the rate of change of some other physical quantity. Power is also closely related to the concepts of force and energy.

Therefore, The power required to do the same amount of work in three times the time is 19000 watts / 3 = 6333.33 watts.

To learn more about power

Here: https://brainly.com/question/30272839

#SPJ1

As a result, the thread holding the two objects together is pushing on them both equally strongly but in different directions.

In this problem, a string connects the two objects, transferring the force of one object to the other. The force is exerted in a different direction while remaining the same magnitude by wrapping the string around a pulley. A string links object A and object B. Gravity will cause object B to fall downward, pulling on one end of the string it is attached to in the process. Newton's law of action-reaction predicts that object B will be pulled upward by this lower end of the string. Object A is attached to the string's other end on the opposite end. Object A is being pulled to the right by this end of the string. Item A is pulled upward by the string, and object B is pulled to the right. The pulley has altered the force's direction of application.

To learn more about force click here    https://brainly.com/question/13191643

#SPJ4

A sea or an ocean's water is known as seawater or salt water. Oceans around the world have an average salinity of 3.5% (35 g/L, 35 ppt, 600 mM).

To learn more about seawater refer to:

https://brainly.com/question/12133478

#SPJ1

The distance at which object falls is 150m.

Given,

The velocity of the object as a function of time is : [tex]v_{y} = (-3\frac{m}{s^{2} } )t[/tex]

We know that [tex]a = dv/dt[/tex] and [tex]a = v. dv/ds[/tex]

Using these two equations we get: [tex]ds = v .dt[/tex]

Where,

v = velocity function

a = acceleration

s = distance

t = time

To find distance we need to integrate i.e.

[tex]s= \int\limits^a_0 {-3t} \, dt[/tex]

Here a = upper limit = 10 sec (t)

So, [tex]s = \frac{-3t^{2} }{2}[/tex]

Putting t=10, we get s = 150m

So, the distance is 150 m.

To know more about kinematics visit:

https://brainly.com/question/29732228

#SPJ4