Explanation:
What are you searching for?
Potential energy?
Answer:
3018.4
Explanation:
So this velocity just before reaching the ground, the final equals square root of two times G times H. So gs 9.8 m per second squared H is 2.8 m. So it gives the velocity of 7.41 m per second squared. That's the velocity right before touching the ground. So to find the impulse required to come to rest here, we just do mass times the velocity minus zero. So zero is the final momentum, final velocity zero. So that makes the final momentum zero. So we multiply the mass with the velocity before touching the ground and after. And subject zero. That's the momentum after touching the ground. So we multiply mass 55 kg. At 7.41 velocity we got 407.45. kilograms meters per second of impulse. we know that the force will be larger for stiff stiff flex compared to bend flex. Because the stiff flex. Bring the object to rest in a short amount of time and distance. So in part C, that's calculate for stiff flex. The stopping distance, Delta Y. Is 0.1 m. This one centimeter. So we can calculate the acceleration of the body when it comes to rest. From the moment it touches the ground. equals v squared over two times Delta Y. So we use the square is 54.88. The 7.41 square divided by two times 0.01 gives us an explosion of 2744 m/s square. So you multiply this acceleration by the mass to get the force so force equals mass times acceleration gives us a large force, 159 20 newtons. Then for bent legs, repeat the same process with a different delta Y, delta Y of 200.5 m. So that's 50 centimeters and calculate acceleration the same process. Just use a different value of delta Y. And we get as much smaller acceleration 54.88 m per second square. And the force experience would just be mass times acceleration. That gives us 3018.4 newton's a lot smaller than for stiff flex.
An example of a neologism from the Internet is:
A. jam (meaning "to play music").
B. peeps (meaning "people" or "the friends you hang out with").
C. bromance (meaning "a close male friendship").
D. defriend (meaning "to remove someone from a friends list").
Answer: peeps
Explanation: meaning “people” or “the friends you hang out with”
Answer: Defriend (meaning "to remove someone from a friends list").
Explanation: Just in case someone comes by again like I did..
We can only tell the earth is rotating almost 960 miles an hour if we
a
look at other people around us as a reference point.
b
look at mountains far away from us as a reference point.
c
use a reference that is not on the earth, like the sun or stars.
Answer:
C
It is C i have to type this because i need 20 characters.
If an athletic field has 440 metre, how many rounds must an athlete do to cover a half marathon, I.e 21km and 200 metre
Answer:
53
Explanation:
Given:
perimeter of the field = 440 m
Half of the distance of marathon = 21 km and 200 meter
Step-by-Step Explanation:
21 km 200 meter
=
21200 Meter (1km= 1000M)
21200 ÷ 400
= 53
Ralph is mowing the back yard with a push mower downward with a force of 20.0 N at an
angle of 30.0° to the horizontal. What are the horizontal and vertical components of the force
exerted by Ralph?
Answer:
Horizontal component = (10N) · sin (20°) = 3.42... N (rounded)
Vertical component = (10N) · cos (20°) = 9.39... N (rounded)
Explanation:
What is the earths layers?
12. If the 50kg rock fell from the 20m high cliff, then what would its velocity be just before it
hits the ground?
Answer:
The velocity is 2.5 before hitting the ground
Explanation:
Mark me as brainliest
2021 edge
Which statements describe elliptical galaxies? *Select the two correct answers.*
A. They include the Milky Way.
B. They are the most common galaxy type.
C. They typically contain very little gas and dust.
D. They include the universe's largest galaxies.
Elliptical galaxies are galaxies that are shaped like an ellipse. An ellipse is oval in shape, which means elliptical galaxies are oval in shape.
The two correct statements that describe elliptical galaxies are:
B. They are the most common galaxy type.
C. They typically contain very little gas and dust.
Elliptical galaxies are galaxies where you will find little or no gas and dust. The galaxies that are numerous in number are the elliptical galaxies. In the elliptical galaxy, you can't find any spiral component in it.Therefore, from the above explanation, we can see that option B and C is the correct option.
To learn more, visit the link below:
https://brainly.com/question/13645005
The statements which describes elliptical galaxies are Choice B and Choice C:
They are the most common galaxy type.They typically contain very little gas and dust.Elliptical galaxies are the most abundant type of galaxies found in the universe although because of their age and dim qualities, they're frequently outshone by younger, brighter collections of starsElliptical galaxies are characterized by the presence of less gas and dust and as such, new shiny stars are not born and the dim nature of elliptical galaxies can be attributed to this.Ultimately, elliptical galaxies are the oldest and are the most common galaxy type and they typically contain very little gas and dust.
Read more:
https://brainly.com/question/14459434
Helen is riding down a freeway on her motorcycle at 95kilometersperhour. At this speed, how far will Helen ride in 2hours?
please can anybody tell me what are these lab equipments
Answer:
5 is the tripoid stand
Thanks have a bangtastic day
Answer:
hii there
5 ) tripod
6 ) test tube holder
Explanation:
Hope it helps
Have a nice day : )
find the current and voltage across each resistor in the given circuit.
Answer:
R1, R4: 1.3433 VR2: 0 VR3: 6.3134 VExplanation:
The resistor R2 is shorted out, so is not in the circuit. The remaining resistors are in a series circuit with a total resistance of ...
R1 +R3 +R4 = 1k +4.7k +1k = 6.7k
The current is the ratio of the applied voltage to this total resistance:
I = V/R = (9 v)/(6.7k) ≈ 1.3433 mA
The voltage across each resistor is the product of this current value and the resistance:
R1 voltage = (1 kΩ)(1.3433 mA) = 1.3433 volts
R2 voltage = 0
R3 voltage = (4.7 kΩ)(1.3433 mA) = 6.3134 volts
R4 voltage = (1 kΩ)(1.3433 mA) = 1.3433 volts
Kinetic and Potential energy
The main difference between potential and kinetic energy is that one is the energy of what can be and one is the energy of what is. In other words, potential energy is stationary, with stored energy to be released; kinetic energy is energy in motion, actively using energy for movement.
HELP me please !!!!
An astronaut drops a hammer from 3.0 meters above the surface of the Moon. If the acceleration due to gravity on the Moon is 1.62 meters per second2, how long will it take for the hammer to fall to the Moon’s surface?
Distance = (1/2 acceleration) · (time)²
3 m = (0.81 m/s²) · (t²)
t² = (3m / 0.81 m/s²)
t² = 3.70 s²
t = 1.92 seconds
Answer:
it c on edge
Explanation:
trust
OMG LOOK AT THIS! YOU WON'T BELIEVE IT!!!!!!!!!!!!
what would happen to the weather if half of the human race died off? would it get colder? why?
it would get healthier considering the stuff we put into the air and weather
And the decaying bodies from the virus you talked about would decompose and go into the soil creating natural fertilizer which means better plans moer air better weather
You're out for run. Your initial velocity is 1.5 m/s. Suddenly a crazy dog starts chasing you and you accelerate to a velocity of 3 m/s. It takes you 10 seconds to find a safe place to hide from the Chihuahua. What was your displacement?
Show your work for displacement.
Include units.
The displacement of your motion during the entire motion is 22.5 m
The given parameters;
your initial velocity, u = 1.5 m/syour final velocity , v = 3 m/stime of motion, t = 10 sThe displacement of your motion during the entire motion is calculated from your average velocity and time of motion.
This magnitude of this displacement is calculated as follows;
[tex]s = (\frac{u+ v}{2} )t\\\\s = (\frac{1.5 + 3}{2} ) \times 10\\\\s = 22.5 \ m[/tex]
Thus, the displacement of your motion during the entire motion is 22.5 m.
Learn more here: https://brainly.com/question/17345815
what are adaptations needed for animals to survive on grassland?
Answer:
short teeth, short hair, camoflauge, and speed
Explanation:
Answer:
speed and awareness
Explanation:
Book A with a mass of 1.00 kg is placed on a horizontal table. Book B with a mass of 0.500 kg is placed on top of book A. What is the magnitude of the normal force exerted on book A by the table?
Answer:
Explanation:
N = mg = (1.00 + 0.500)(9.81) = 14.7 N
The magnitude of the normal force exerted on book A by the table is 14.7 N
ForcesFrom the question, we are to determine the magnitude of the normal force.
The normal force ca be calculated by using the formula
[tex]F_{n} = mg[/tex]
Where [tex]F_{n}[/tex] is the normal force
m is the mass
and g is the gravitational field strength ( g = 9.8 m/s²)
The mass will be addition of the masses since Book B is placed on top of the book.
Thus,
m = 1.00 kg + 0.500 kg = 1.50 kg
Then,
[tex]F_{n} = 1.5 \times 9.8[/tex]
[tex]F_{n} = 14.7 \ N[/tex]
Hence, the magnitude of the normal force exerted on book A by the table is 14.7 N
Learn more on Forces here: https://brainly.com/question/13707444
Which of the following is a product in the process of photosynthesis?
O Nitrogen
O Water
O Glucose
O Sunlight
Answer:
glucose is the product in the process of photosynthesisthe weight on each foot of an elephant 500n. what will be the contact force
Answer:
The weight of an object is the force it exerts due to gravity. Pressure is force per unit area, or force divided by area over which the pressure is exerted.
Explanation:
1. For Jo:
1. For Jo:force = 500 N
1. For Jo:force = 500 Narea = 0.0001 m^2
1. For Jo:force = 500 Narea = 0.0001 m^2pressure = F/A = 500N/0.0001m^2 = 5,000,000 N/m^2
the velocity of an object must include these two things ________ and _________
will give brainlest
Answer:
The velocity of an object must include these two things displacement and time.
Explanation:
Hope this helps you. Have a nice day^_^
Please mark as brainliest. It helps a lot. :)
ACTIVITY 1: Research a Famous Chemist or Physicist
1) Do research on a famous chemist or physicist. Write a 300-500 word essay one of them. Use at least three different sources. Sources can include biographies, internet articles from universities, or journal articles. Wikipedia is not an acceptable source information.
Be sure to answer these questions:
* What did this scientist discover?
* How was it discovered?
* How does this discovery or invention impact the world today?
(Scientist: Nikola Tesla)
Answer:
What did this scientist discover?
Nikola Tesla discovered and created Bluetooth back in 19, November 5, 1898.
"The Transmission of Electrical Energy Without Wires", Electrical World and Engineer, January 7, 1905. Tesla, Nikola, World System of Wireless Transmission of Energy, Telegraph and Telegraph Age, October 16, 1927.
How was it discovered?
In 1901 Tesla began his work of a large high-voltage wireless energy transmission station called the Wardenclyffe Tower. ... Some devices already employ wireless energy transfer without the use of metal contacts. The power is transferred through the plastic cases using magnetic induction.
How does this discovery or invention impact the world today?
It changed the new age by listening to music with wireless earbuds.
A 500 kg airplane wing is hanging on a rope from the ceiling. What is the tension force being supplied by the rope?
a.5000
b.2500
c.250
d.500
Answer:
a. 5000 N
Explanation:
If gravity is 10 m/s² and the wing is motionless.
F = ma = 500(10) = 5000 N
By the time children are five years old:
A. the typical 90-minute sleep cycles of alternating REM and NREM are established.
B. about 50 percent of sleep time is spent in REM sleep and 50 percent is spent in quiet sleep that is very similar to NREM stages 1 and 2.
C. their sleep pattern is characterized by 60-minute sleep cycles, producing up to 13 cycles per day.
D. they will begin to experience their first dreams and nightmares.
Option D is correct. Around the age of five, children begin to experience their first dreams and nightmares
By the time children are five years old, several developments occur in their sleep patterns.
Option A is incorrect because the typical 90-minute sleep cycles of alternating REM (Rapid Eye Movement) and NREM (Non-Rapid Eye Movement) are not yet established at this age.
Option B is also incorrect as the sleep time distribution between REM sleep and quiet sleep (similar to NREM stages 1 and 2) is not necessarily equal at this stage.
Option C is inaccurate because 60-minute sleep cycles producing up to 13 cycles per day do not align with the typical sleep patterns of five-year-olds.
However, option D is correct. Around the age of five, children begin to experience their first dreams and nightmares.
This is an important milestone in their cognitive and emotional development, as it reflects the maturation of the brain regions involved in dreaming and the processing of emotions during sleep.
For more such questions on nightmares
https://brainly.com/question/14449788
#SPJ8
PLS HELP ME WITH THIS
Answer:
C
Explanation:
C
What is the major difference between metallic bonding and ionic bonding?
Answer:
The key difference between ionic bonding and metallic bonding is that the ionic bonding takes place between positive and negative ions whereas the metallic bonding takes place between positive ions and electrons.
Explanation:
About (metallic bonding) → Metallic bonding is a type of chemical bonding that arises from the electrostatic attractive force between conduction electrons and positively charged metal ions.
About (ionic bonding) → Ionic bonding is a type of chemical bonding that involves the electrostatic attraction between oppositely charged ions, or between two atoms with sharply different electronegativities, and is the primary interaction occurring in ionic compounds
I hope this helps!
Which statement describes Kepler’s third law of orbital motion?
Answer:
The square of orbital period is proportional to the cube of the semi-major axis.
Explanation:
I just took the quick check
what’s 12cm in kilometers
a father and his son are racing down a mountain. if they're traveling at the same velocity who has more kinetic energy
Answer:
I think it's the son
Explanation:
bcs he might love it
Which of these describes Kepler’s third law of orbital motion?(1 point)
T3 ∝a2
T∝a2
T2 ∝ a3
T2∝a
Answer:
1) which planet's orbit was Kepler first studying when he began to developed his laws of orbital motion? Answer: Mars
2) which is the best description of Earth's orbit? Answer: almost circular
3) which orbital shape did most scientists in the early 1600s think the planets of our solar system have? Answer: circular
4) which of these describes Kepler's third law of orbital motion? Answer T^2 OX a^3
5) which statement describes Kepler's third law of orbital motion? Answer The square of orbital period is proportional to the cube of the semi-major axis.
Explanation:
I just took the connexus quick check and got a 100%
T2 ∝ a3 is the relation that describes Kepler’s third law of orbital motion, therefore the correct answer is option C.
What are Kepler's laws of planetary motion?There are three laws of Kepler as follows,
The orbit of the planet is elliptical and the sun is present at one of the two foci of the elliptical route followed by the rotating planet.
A line segment linking a planet and the Sun covers equal regions throughout equal intervals of the time period.
The semi-major axis length of an elliptical planet's orbit is equal to the square of the planet's orbital period.
T2 ∝ a3 is the relation that describes Kepler’s third law of orbital motion,
Thus, the correct answer is option C.
To learn more about Kepler's laws of planetary motion, refer to the link;
brainly.com/question/1455457
#SPJ2
two balls are dropped from rest and allowed to fall for 1 s and the other for 3 s, compare the distances they have fallen