A 475 cm3 sample of gas at standard temperature (273 K) and pressure
(1 atm) is allowed to expand until it occupies a volume of 600. cm3. What
temperature would be needed to return the gas to standard pressure (1 atm)?
(n = constant

Answers

Answer 1

Answer:

T₂ =  344.8 K

Explanation:

Given data:

Initial volume of gas = 475 cm³

Initial temperature = 273 K

Final volume = 600 cm³

Final temperature = ?

Solution:

The given problem will be solve through the Charles Law.

According to this law, The volume of given amount of a gas is directly proportional to its temperature at constant number of moles and pressure.

Mathematical expression:

V₁/T₁ = V₂/T₂

V₁ = Initial volume

T₁ = Initial temperature

V₂ = Final volume  

T₂ = Final temperature

Now we will put the values in formula.

V₁/T₁ = V₂/T₂

T₂ = T₁V₂/V₁  

T₂ = 273 K × 600 cm³ /  475 cm³

T₂ = 163800K . cm³ / 475 cm³

T₂ =  344.8 K


Related Questions

A trucker is driving from New Jersey to California to make a delivery of couches. He forgets to adjust the pressure of his tires before his trip and end up blowing out two of his tires while driving through Arizona. Whose law does this example depict? What does this law state? Use the law to explain what happened to the tires.

Answers

Answer:

Gay-Lussac's law.

Explanation:

According to Gay-Lussac's pressure law, it states that the pressure of a given mass of gas is directly proportional to the absolute temperature of the gas, the assumption that the volume is kept constant.

Hence, the trucker's tires were blown up because they were under high pressure as he drove from New Jersey to California, as a result of this intense pressure the temperature of the air in the tires began to rise and it directly affected the pressure of the gas in the tires' tubes which also increased to a point that they ended up blowing out, obeying Gay-Lussac's law.

Differences in states of matter are determined by

particle type
particle arrangement
particle color
distance between particles

Answers

Answer:

particle distance

solids are tightly packed

liquids are a little farther apart

and gases are very far

“Jesus came to serve. How is He calling me to serve?”

Answers

Answer:

...

Explanation:

When the first periodic table of the elements was published, the elements were arranged by atomic mass. Although
several elements seemed out of order, later discoveries showed the order to be correct.
Which event most likely helped the development of the periodic table?
O Scientists changed the atomic masses to better fit the pattern.
O Scientists refused to consider other ways to organize the elements.
O New technology was developed that modified the masses.
O New information changed the understanding of the atom's structure.


ANSWER ASAP

Answers

its. a c but im not sure. ??.?

A brief explanation to this question: "Why are neon signs/fireworks different colors? Please help me. Do not look up internet

Answers

Answer:

when lit, the atoms of different chemical compounds inside the firework absorb energy, when the electrons fall back to lower energy levels, they give off colored light. Depending upon the chemical used, different colors are produced. neon lights or signs are glass tubes filled with neon gas. When the light is plugged in, the electrical energy causes the electrons of neon to jump to higher energy levels, when they go to lower levels, colored light is given off. The neat thing is that the neon never gets used up. The only thing that gets used up is the electricity. The electrons don't get destroyed and can be used over and over again jumping levels. Neon glows with an orange light, but you know that neon signs can be lots of different colors. The variations come when different gases other than neon are used such as argon, or krypton or when the tube is painted so that with the light produced it produces a certain color.

Explanation:

After being excited by high levels of electrical energy (as in neon signs) or heat energy, various elements and molecules will emit their own specific colors of light.

What are basis behind fireworks?

Metals burn in a variety of colors. When a copper compound is lit, for example, the flame is blue-green.

Calcium burns red, while potassium burns purple. Metals are combined to produce various colors in fireworks.

The appearance of each firework is determined by the type of stars it contains, as well as the size and quantity of these pellets.

Some stars contain metal salts, which produce brilliant colors, while others contain a variety of chemical compounds that produce dazzling light effects such as strobing, sparkling, and others.

Various elements and molecules will emit their own specific colors of light after being excited by high levels of electrical energy (as in neon signs) or heat energy (as in the fireworks).

Thus, the neon signs or fireworks provide different colors.

For more details regarding fireworks, visit:

https://brainly.com/question/16737516

#SPJ2

The table below shows the average seasonal relative humidity during the summer in four locations:


Relative Humidity
Location Average Seasonal Relative Humidity (%)
A 76
B 81
C 60
D 98


Which location is most likely to experience frequent summertime storms?
Location A
Location B
Location C
Location D

Answers

Answer:

the answer is B

Explanation:

because its asking you the frequent summertime storms

hope it helps you

Answer:

b is your answer i'm sure of it :)

Explanation:

have great day :)

name the gas evolved when metal carbonates react with acid and state the method​

Answers

Answer:

the gas evolved is carbon dioxide

Explanation:

for example we can have a look at sodium carbonate reaction with hydrochloric acid

when sodium carbonate reacts with hydrochloric acid, it results in sodium chloride, carbon dioxide and water.

Answer: Carbon dioxide

CAN SOMEONE PLEASE HELP ME ASAP PLEASEE ANYBODY LITERALLY ANYONE OUT THERE PLEASE

Which subatomic particle can be shared between separate atoms?

Answers

Answer:

Electrons

Explanation:

Atoms can combine together and share electrons between them. Atoms that share electrons are linked to each other in a form, called a molecule that is in a lower energy state than either of the separate atoms alone.

Pls Brainliest! It would mean a lot! ;)

Does changing the number of neutrons affect the atomic number?

Answers

Answer:

awsdxcvawsd

Explanation:

Answer:If you change the number of neutrons in an atom, you get an isotope of the same element. The addition of a neutron can make an atom radioactive. When you change the number of protons in an atom, you will change the atom from one element to a different element.

Explanation:

widte speed rom me and distance 502
A yacht sailed at a steady speed for 0.5 hours, passing a cruise ship that was traveling at 25
kilometers per hour. During that time, the yacht traveled 50 kilometers. What was the yacht's
speed?
Write your answer as a whole number.
kilometers per hour
Submit

Answers

The speed of the yacht : 100 km/h

Further explanation  

Linear motion consists of 2: constant velocity motion with constant velocity and uniformly accelerated motion with constant acceleration  

At constant velocity motion:  

the speed of vo = v = constant

acceleration = a = 0  

Δx = vt or x = xo + vt  

An equation of constant velocity motion  

[tex]\large {\boxed {\bold {x = v \times \: t}}}[/tex]

x = distance = m  

v = speed = m / s  

t = time = seconds  

A yacht sailed at a steady speed for 0.5 hours, and traveled 50 kilometers

so the velocity/speed:

[tex]\tt v=\dfrac{x}{t}\\\\v=\dfrac{50~km}{0.5~h}=\boxed{\bold{100~km/h}}[/tex]

11. Which of the following best explains why CO2 gas is easily compressible but solid
CO2 (dry ice) is incompressible?
The molecules of CO2 gas are much closer together than
the molecules in dry ice.
The molecules of CO2 gas are much smaller than the molecules
of solid CO2
O
The molecules of solid CO2 are much closer together than
the molecules of CO2 gas.
The molecules of CO2 gas attract one another, while the
molecules of the solid CO2 repel one another.
0

Answers

Answer:

The right answer is C. The molecules of solid CO2 are much closer together than the molecules of CO2 gas.

The molecules of CO2 gas are much closer together than the molecules in dry ice. So CO2 gas is easily compressible but solid CO2 is incompressible. The correct option is A.

What is dry ice?

Carbon dioxide in its solid form is known as dry ice. Because CO2 does not have a liquid state at normal atmospheric pressure and sublimates directly from the solid to the gas state, it is commonly used for temporary refrigeration.

Dry ice can be a serious hazard in a small, poorly ventilated space. When dry ice melts, it emits carbon dioxide gas.

This gas can accumulate in a small space. A person can become unconscious and, in some cases, die if there is enough carbon dioxide gas present.

CO2 gas molecules are much closer together than dry ice molecules. As a result, CO2 gas is easily compressible, but solid CO2 is not.

Thus, the correct option is A.

For more details regarding dry ice, visit:

https://brainly.com/question/13972158

#SPJ2

Which of the following is a mineral?
coal
ling
glass
brick
salt

Answers

Salt coal are minerals

how do i know if they are congruent

Answers

if they are next to each other & look exactly the same btw this is math

What is the relationship between ionization energy and
electronegativity based on these cards?

Answers

Answer: here u go

Explanation:

The ionization energy can be thought of as a kind of counter property to electronegativity in the sense that a low ionization energy implies that an element readily gives electrons to a reaction, while a high electronegativity implies that an element strongly seeks to take electrons in a reaction.

Answer: Ionization energy is the energy required to remove an electron from a neutral atom in its gaseous phase.

Explanation: Conceptually, ionization energy is the opposite of electronegativity. The lower this energy is, the more readily the atom becomes a cation.

Jakasia needed to find the volume of a plastic container in L to see if the 170 L of
solution that she had would fit inside. She knew that one side was 2.5 ft, the
height of the box was 60 cm, and width of the box was 0.8 m. Use dimensional
analysis to determine if Jakasia's solution will fit in the container.

Answers

Answer:

The solution will fit into the container.

Explanation:

The following data were obtained from the question'

Volume of solution = 170 L

Length of container (L) = 2.5 ft

Height of container (H) = 60 cm

Width of container (W) = 0.8 m

Volume of container (V) =?

Next, we shall express the length, height and breadth I the same unit of measurement. In this case, we shall all in centimetres (cm).

For the length:

1 ft = 30.48 cm

Therefore,

2.5 ft = 2.5 ft × 30.48 cm / 1 ft

2.5 ft = 76.2 cm

Thus the length is 76.2 cm

For the width:

1 m = 100 cm

Therefore,

0.8 m = 0.8 m × 100 cm / 1 m

0.8 m = 80 cm

Thus, the width of the container is 80 cm.

Next, we shall determine the volume of the container as follow:

ength of container (L) = 76. 2 cm

Height of container (H) = 60 cm

Width of container (W) = 80 cm

Volume of container (V) =?

Volume = length × width × height

Volume = 76.2 × 80 × 60

Volume = 365760 cm³

Finally, we shall convert 365760 cm³ to litre (L). This can be obtained as follow:

1000 cm³ = 1 L

Therefore,

365760 cm³ = 365760 cm³ × 1 L/ 1000 cm³

365760 cm³ = 365.76 L

Therefore, the volume of the container is 365.76 L

Since the volume of the container (i.e 365.76 L) is bigger than the volume of the solution (i.e 170 L), therefore, the solution will fit into the container.

NEEEDDDD HELP ASAP PLZ PLZ PLZ PLZ PLZ HELP ME

Answers

Answer:

[tex]ns^2[/tex]

Explanation:

Which is the best way to determine if an object is made of pure silver?
O Determine the solubility of the object.
O Test to see if the object is chemically reactive.
Determine the density of the object and compare the known density of pure silver.
O Compare the mass of the silver object to the mass of a piece of pure silver.

Answers

Answer:

The correct option is;

Determine the density of the object and compare the known density of pure Silver

Explanation:

The density of the object is found by finding the weight of the object, and then finding the volume (of water) the object displaces when it is immersed (in water)

The  density is then fond by dividing the weighed mass by the volume the object displaces when immersed

Compare the result of the measured density with that of pure silver. If the two have density, as well as other similar physical characteristics, then the object is likely to be pure silver.

Is this correct?
If the temperature is below the melting point the substance is a solid
If the temperature is above the boiling point the substance is a gas
If the temperature is in between the boiling and melting points the substances a liquid.

Answers

If the normal melting point of a substance is below room temperature, the substance is a liquid at room temperature.

If both the normal melting point and the normal boiling point are above room temperature, the substance is a solid.

what happens to the particles of a substance as it's temperature increases

Answers

Here you gooo!! lol u just had to search it yp

Analyzing a blood sample usually involves which type of separation method?
screening
distillation
centrifugation
filtration

Answers

The answer would be Centrifugation! How this helps!

Answer:

the answer is b

Explanation:

i just did quizz

hey guys plz plz plz help me I am struggling I am in middle and struggling to answer this plz help
I have never learned how to calculate the specific heat there is a photo if u know plz answer we have a lot of people trying to figure out how to solve this and know one knows so plz if u know give it your best shot.
thank u I will most definitely appreciate it
and if u answer this correctly I will give 50 point and mark brainliest
of u are just trying to get point u rill be reported
so thanks guys.​

Answers

Answer:

I've already answered this one for you. Anyway, please let me know if you have any more questions or need help!

example of physical property

Answers

Answer:

Color. I thinkkk.

Phyiscal properties are defined as properties that can be measured or observed without changing the chemical nature of the substance.

Some examples of phsyical properties are:

- Color

- Density

- Volume

- Mass

- Boiling or Melting Points

Which statement best describes insoluble substances? Insoluble substances remain the same when in water. Insoluble substances become part of the liquid substance. Water does not remain when an insoluble substance is added. Insoluble substances change from solid to liquid states.

Answers

Answer:

Insoluble substances remain the same when in water.

Explanation:

When a substance is regarded as insoluble, it means that the substance remains the same in water.

Soluble substances usually form one continuous phase with water when they are added to water (eg when salt is added to water).

However, when camphor is added to water, it does not form a single phase with water. It remains the same in the water and maintains a separate phase from the water. Hence camphor is an insoluble substance.

A skittish squirrel is climbing vertically on a tree. Its
motion is shown on the following graph of vertical
position y vs. time t.
6
5+
3
2+
1
→t(s)
2
3
4
5
6
7
8
9
What is the instantaneous speed of the squirrel at time
t=2 s?​

Answers

Answer: 1

Explanation:

Answer:

-0.1

Explanation:

The temperature at which a substance in its solid state melts into the same substance in a liquid is known as

Answers

Answer:

0 C

Explanation:

what does MA 2 means?​

Answers

Answer:

Master-at-Arms Petty Officer 2nd Class. MA2. Machine Accountant Second Class (Naval Rating) Copyright 1988-2018 AcronymFinder.com, All rights reserved.

Explanation:

10.0 J of energy is required to increase the temperature of 1 g of water by 10oC. What is this value in calories? In kcal?

Answers

10 J = 2.39 cal = 2.39 x 10⁻³ kcal

Further explanation

The joule is one unit of energy. energy itself can be expressed in units such as calories, BTU, kg⋅m²s⁻²

An example of energy calculation is the calculation of heat in heat transfer

Heat can be calculated using the formula:  

Q = mc∆T  

Q = heat, J  

m = mass, g  

c = specific heat, joules / g ° C  

∆T = temperature difference, ° C / K  

10 J if we convert into calories and kcal

[tex]\tt 1~J= 0.239~cal\\\\10~J=2.39~cal\\\\2.39~cal=2.39\times 10^{-3}~kcal[/tex]

Elena held a rock weighing 1 N in her hand. The rock has no velocity.
KE________?

Answers

KE = 0

Further explanation  

Energy is the ability to do work  

Energy because its motion is expressed as Kinetic energy (KE) which can be formulated as:  

[tex]\large{\boxed{\bold{KE=\frac{1}{2}mv^2}}}[/tex]

So for two objects that have the same speed, the greater the mass of the object, the greater the kinetic energy  

The stone in hand is in a motionless state (at rest) so that its velocity (v) = 0, so it has no kinetic energy

But this stone can have potential energy that is gained due to its height

PLES help me for brainless

Answers

Answer:

a 1   doesn't belong

Explanation:

Gas has fast moving molecules.

Liquids have slow moving molecules.

Solids have vibrating molecules.

what is your impression of nuclear power

Answers

It depends on what you think about it
Other Questions
helpppp me plz any help would work :) dimensional formula of stress is same as you must have a common denominator when ? fractions The terminal side of angle intersects the unit circle in the first quadrant at (925,y). What are the exact values of sin and cos? Question 5 of 10Which points are separated by a distance of 7 units?O A (1,3)O B. (5,7)O C. (3,5)O D. (9.4)(24)SUBMIT Heels, a shoe manufacturer, is evaluating the costs and benefits of new equipment that would custom fit each pair of athletic shoes. The customer would have his or her foot scanned by digital computer equipment; this information would be used to cut the raw materials to provide the customer a perfect fit. The new equipment costs $107,000 and is expected to generate an additional $43,000 in cash flows for five years. A bank will make a $107,000 loan to the company at a 15% interest rate for this equipments purchase. Compute the recovery time for both the payback period and break-even time. (PV of $1, FV of $1, PVA of $1, and FVA of $1) (Use appropriate factor(s) from the tables provided.)Chart Values are Based on: 10% Cumulative Cash Inflow Present Value of Inflow Year Present Value PV Factor (Outflow) (Outflow) (91,000) x 1.0000- (91,000) $ (91,000) 36,000 x 36,000 x 2.5 years 3. Does matter increase inmass when mixed withanother substance?a Yesb. No 10 POINTS+BRAINLIEST PLEASE ANSWER!Match each word to its antonym.permittedunharmedordinarysullencheerfularrowRightinjuredarrowRightillegalarrowRightbeautifularrowRight Which of these strategies is most likely to help you manage your electronicdevice usage?A. Interact with people online in a courteous way,B. Interact with friends and relatives in a rude way.C. Interact with Internet bullies in a sarcastic way.D. Interact with strangers on the Internet in an aggressive way.help me please asap i need to get this test done! Which is the answer A B C Or D Pls someone help its my last question Who here listens to Raxstar? (British-Asian Rapper) 22. What region inspired the U.S tobecome a world power? Namecountries and region PLEAS HELP ME!!!!!!!!! I DON'T KNOW THE ANSWERYouths who are victims of dating violence are more likely to experience symptoms of depression and anxiety; engage in unhealthy behaviors, like using tobacco, drugs, and alcohol; or exhibit antisocial behaviors and think about s.u.i.c.i.d.e. And those who are victims of dating violence in high school are also at a higher risk for victimization during college. Understanding Teen Dating Violence, Centers for Disease Control and PreventionBased on this text, what group of college students are at an increased risk of dating violence? those who have a disability those who experienced dating violence in high school those who witnessed parental violence as children those with a parent who is incarcerated Ill give the Brainliest, you also need to explain how the answer you got is correct.Choose the best description of a neap tide.A. Neap tides produce during the highest tides of the month.B. Neap tides happen during winter and summer.C. Neap tides could be described as low high tides and high low tides.D. A neap tide is the period halfway between tides when the tide changes direction.Thank you! What FOUR elements of life that are represented on a Da de los muertos altar? pls help with the picture above! Which best describes the relationship between genetic variation and adaptation? The American Colonists claimed the Revolution was started so they could have freedom and because the British not allowing them a say in government. How might a slave's view of the American Revolution be different than that of a wealthy white colonist? -5.65 ___ -5.6Which one is correct? Greater than, less than, or equal?A. (-5.65 > -5.6)B. (-5.65 < -5.6)C. (-5.65 = -5.6)Explain btw!!!