Answer:
B) 100 J
Explanation:
Assuming the distance given is measured along the incline, the vertical change in height is (5 m)(sin 30°) = 2.5 m. Then the change in potential energy is ...
∆PE = mg(∆h) = (4 kg)(10 m/s^2)(2.5 m) = 100 J
The force is defined as the product of the mass and the acceleration. The energy stored in an object which is converted into kinetic energy is called potential energy.
The formula for the potential energy is mgh.
The correct answer is B that is 100J.
As the surface is inclined the vertical change in height is[tex](5 m)(sin 30^o) = 2.5[/tex]m.
Therefore the potential energy after solving it is as follows:-
[tex]PE = mg(h) \\= (4 kg)(10 m/s^2)(2.5 m)\\\\= 100 J[/tex]
For more information, refer to the link:-
https://brainly.com/question/2127750
A bicycle has a momentum of 36 kg* m/s and a very!I city of 4 m/s.What is the mass of the bicycle?
p = 36 kgm/s
v = 4m/s
we know that,
p = mv
so,
[tex]m = \frac{p}{v} [/tex]
[tex]m = \frac{36}{4} [/tex]
[tex]m = 9kg[/tex]
A horse travels 1200 meters to the right in 60 seconds. What was its velocity?
a. 72,000 m/s
b. 20 m/s
c. 0.05 m/s
d. 1260 m/s
Answer:
a
Explanation:
If its not right choose D
Match the following. Match the items in the left column to the items in the right column.
1. index fossil
study of fossils
2. law of original lateral continuity
study of rock layers and the processes that form them
3. law of superposition
a fossil that is widespread geographically but only occurs in one layer or a small number of layers of rock
4. paleontology
sediment deposited into water will spread in a horizontal and continuous sheet
5. stratigraphy
any undisturbed sequence of layered rocks has the oldest rock on the bottom and newest rock on the top
Answer:
1. A fossil that is widespread geographically but only occurs in one layer or a small number of layers of rock
2. Sediment deposited into water will spread in a horizontal and continuous sheet
3. Any undisturbed sequence of layered rocks has the oldest rock on the bottom and newest rock on the top
4. Study of fossils
5. Study of rock layers and the process that form them
Sorry if any of these are wrong
Which technology contains at least one permanent magnet?
A. A gasoline engine
B. An electrical circuit
C. An electromagnet
D. An electric generator
ASAP plz
Answer:
C. An electromagnet
Explanation:
Answer: D. An electric generator
A plumber applies a torque of 408 to a bolt using a wrench. If he moves his hand twice as far
away on the wrench's handle from the bolt (doubling the radius), but applies the same force
as before, how much torque will he now apply?
Answer:
816
Explanation:
We must remember that torque is defined as the product of a force by a distance.
This distance is measured from the pivot point of the Bolt to the point where the force is applied. in this way, we have the following equation to be able to determine the torque.
[tex]T=F*d[/tex]
Now if we double the turning distance we have the torque should also be double.
[tex]T =F*2*d[/tex]
A 50.0 kg object is moving at 18.2 m/s when a 200 N force is applied opposite the direction of the objects motion, causing it to slow down to 12.6 m/s. How long was this force applies?
Answer:
t = 1.4[s]
Explanation:
To solve this problem we must use the principle of conservation of linear momentum, which tells us that momentum is conserved before and after applying a force to a body. We must remember that the impulse can be calculated by means of the following equation.
[tex]P=m*v\\or\\P=F*t[/tex]
where:
P = impulse or lineal momentum [kg*m/s]
m = mass = 50 [kg]
v = velocity [m/s]
F = force = 200[N]
t = time = [s]
Now we must be clear that the final linear momentum must be equal to the original linear momentum plus the applied momentum. In this way we can deduce the following equation.
[tex](m_{1}*v_{1})-F*t=(m_{1}*v_{2})[/tex]
where:
m₁ = mass of the object = 50 [kg]
v₁ = velocity of the object before the impulse = 18.2 [m/s]
v₂ = velocity of the object after the impulse = 12.6 [m/s]
[tex](50*18.2)-200*t=50*12.6\\910-200*t=630\\200*t=910-630\\200*t=280\\t=1.4[s][/tex]
What is the steady state rate of heat flow through a pane of glass that is 40.0 cm by 30.0 cm with a thickness of 4.00 mm when the outside temperature of the glass is −10.0℃ and its inside temperature is 25.0℃? The thermal conductivity of glass is 0.105 W/(m⋅K); the specific heat of glass is 0.180 cal/(g⋅℃); and 1 cal = 4.190 J.
Answer:
110.25 watt/s
Explanation:
The rate of heat transfer is given by the formula
R = k*A(T1 - T2) / d, where
k = thermal conductivity, 0.105 (W/(m*K)
d = thickness, 4 mm = 0.004 m
T1 = inside temperature, 25° C
T2 = outside temperatures, -10° C
A = area 0.3 * 0.4 = 0.12 m²
Now, applying the given data to the formula, we have
Rate = 0.105 * 0.12 (25 - -10) / 0.004
Rate = 0.105 * 0.12(35) / 0.004
Rate = 0.105 * 4.2 / 0.004
Rate = 0.441 / 0.004
Rate = 110.25 Watt/s
Therefore, the steady state rate of heat flow is 110.25 watt/s
explain an experiment of the phenomenon of rainfall
Unclear/incomplete question. However, I inferred you need an explanation of the phenomenon of rainfall.
Explanation:
Basically, the phenomenon of rainfall follows a natural cycle called the water cycle. What we call 'rainfall' occurs when water condensed (in liquid form) in the atmosphere is made to fall down on the ground as tiny droplets as a result of the forces of gravity.
The water cycle makes rainfall possible:
First, water on the earth's surface is evaporated (or is absorbed into) the atmosphere.Next, it then condensed into liquid form; which later falls to the surface to the ground again. And the process continues.Which substance may lower air temperatures after a volcanic eruption?
lava
sulfur dioxide
carbon dioxide
water vapor
The awnser is sulfur dioxide.
The gas that is responsible for lowering the temperature is sulfur dioxide gas.
A volcanic eruption refers to the sudden escape of lava and gases from the earth's core. It usually occurs at a very high temperature. The solidification of the volcano leads to rock formation.
During a volcanic eruption, the gas that is responsible for lowering the temperature is sulfur dioxide gas.
Learn more: https://brainly.com/question/1622004
A stretched string is observed to have four equal segments in a standing wave driven at a frequency of 480 Hz. What driving frequency will set up a standing wave with five equal segments?
a) 360 Hz.b) 240 Hz.c) 600 Hz.d) 120 Hz.
Answer:
C) 600 Hz
Explanation:
The fundamental frequency can be related to the driving frequency by the expression below;
f(n) = n * f(1)
Where f(1)= fundamental frequency
f(n) = driving frequency
There are four equal segments in the standing wave , then our n= 4 and our f(n)=4, then we can get the fundamental frequency here
f(4) = 4× f(1)
480 = 4× f(1)
f(1) = 480/4
f(1)=120Hz
Hence, fundamental frequency is 120Hz
To calculate the driving frequency that will set up a standing wave with five equal segments?
n=5
f(n) = n× 120Hz
f(5) = 5×120Hz
= 600Hz.
Hence, the driving frequency that will set up a standing wave with five equal segments is 600Hz
PLEASE HELP :(
I WILL GIVE EXTRA POINTS
1. When is the kinetic energy of an electron transformed into potential energy?
when it interacts with other electrons, decreasing its speed
when it interacts with neutrons without changing its speed
when it interacts with neutrons , increasing its speed
when it interacts with other electrons without changing its speed
2. Atoms bond to form molecules. Which structures or regions of the atoms interact in bonds ?
electric fields of particles with positive charge
electric fields of particles with no charge
electric fields of particles with negative charge
electric fields of particles with opposite charges
3. If two electrons that are apart get pushed toward each other, how does the repulsion between them change?
Initial repulsion is low and decreases as they approach .
Initial repulsion is high and decreases as they approach .
Initial repulsion is high and increases as they approach .
Initial repulsion is low and increases as they approach .
4. A positive charge of 5.0x10 ^ -5 C °is 0.040 m from a second positive charge of 2.0x10 ^ -6 C Calculate the force between the charges.
5.6x10^2 N
5.6x10^2 N
1.4X10^-2 N
2.3X10^1 N
(a) When the kinetic energy of an electron is transformed into potential energy is when it interacts with other electrons, decreasing its speed.
(b) The region of atoms that interact in bonds is electric fields of particles with negative charge.
(c) Initial repulsion is low and increases as they approach.
(d) The force between the charges is 562.5 N.
Kinetic theory of matter
This theory states that, the collision of particles (electrons) of matter is perfectly elastic. This implies that as the particles (electrons) collides with one another, kinetic energy is transferred from one electron to another.
ΔK.E = ΔP.E
Change in kinetic energy is equal to change in potential energy of the electrons.
Thus, when the kinetic energy of an electron is transformed into potential energy is when it interacts with other electrons, decreasing its speed. Decrease in speed implies decrease in kinetic energy and increase in potential energy.
Chemical bonds of moleculesChemical bond is formed from the transfer or sharing of electrons between atoms. (electrons between atoms implies negative charge to negative charge)
Thus, the region of atoms that interact in bonds is electric fields of particles with negative charge.
Coulomb's law
This law states that the force of attraction or repulsion between two charges is directly proportional to the product of the charges and inversely proportional to the distance between the charges.
[tex]F = \frac{kq_1q_2}{r^2}[/tex]
When the distance between the electrons are large, the repulsive force is low and the distance is small, the repulsive force is high.
Force between the chargesThe force between the charges is determined by applying Coulomb's law,
[tex]F = \frac{kq_1q_2}{r^2} \\\\F = \frac{9\times 10^9\times (5 \times 10^{-5}) \times (2\times 10^{-6})}{0.04^2} \\\\F = 562.5 \ N[/tex]
Learn more about Coulomb's law here: https://brainly.com/question/24743340
A radioactive nuclide of atomic number Z emits an alpha particle and the daughter nucleus then emits a beta particle. What is the atomic number of resulting nuclide?
A) Z-1
B) Z+1
C) Z-2
D) Z-3
Answer:
A) Z-1
Explanation:
when a radioactive element of atomic number Z emits an alpha particle, the mass of the new nucleus decreases by 2, i.e the new atomic number of the element = ( Z- 2).
Also, when the daughter nucleus emits a beta particle, the new nucleus increases by 1, that is the new atomic number of the element = (Z + 1).
Thus, the atomic number of resulting nuclide = Z ( - 2) + ( + 1).
= Z - 2 + 1
= Z - 1
Therefore, the atomic number of resulting nuclide is Z - 1
If an atom contains 13 protons, then it has (2.4)a.13 electrons. b. 26 electrons. c. 13 neutrons. d.26 neutrons.
If an atom contains 13 protons, then it has 13 electrons.
What would be the coefficient of performance if the refrigerator (operating between the same temperatures) was instead used as a heat pump?
COP =
Complete Question
A certain refrigerator, operating between temperatures of -8.00°C and +23.2°C, can be approximated as a Carnot refrigerator.
What is the refrigerator's coefficient of performance? COP
(b) What If? What would be the coefficient of performance if the refrigerator (operating between the same temperatures) was instead used as a heat pump? COP
Answer:
a
[tex]COP = 8.49[/tex]
b
[tex]COP_1 = 9.49[/tex]
Explanation:
From the question we are told that
The lower operation temperature of refrigerator is [tex]T_1 = -8.00^oC = 265 \ K[/tex]
The upper operation temperature of the refrigerator is [tex]T_2 = 23.2 ^oC = 296.2 \ K[/tex]
Generally the refrigerators coefficient of performance is mathematically represented as
[tex]COP = \frac{T_1}{T_2 - T_1 }[/tex]
=> [tex]COP = \frac{265}{296.2 - 265 }[/tex]
=> [tex]COP = 8.49[/tex]
Generally if a refrigerator (operating between the same temperatures) was instead used as a heat pump , the coefficient of performance is mathematically represented as
[tex]COP_1 = \frac{T_2}{ T_2 - T_1}[/tex]
=> [tex]COP_1 = \frac{296.2}{ 296.2 - 265 }[/tex]
=> [tex]COP_1 = 9.49[/tex]
The coefficient of performance if the refrigerator is used as a heat pump is 9.5.
The given parameters;
initial temperature, T₁ = -8 ⁰C = -8 + 273 = 265 Kfinal temperature, T₂ = 23.2°C = 23.2°C + 273 = 296.2 KThe coefficient of performance if the refrigerator is used as a heat pump is calculated as follows;
[tex]COP = \frac{T_2}{T_2 - T_1}\\\\COP = \frac{296.2}{296.2 - 265} \\\\COP =9.5[/tex]
Thus, the coefficient of performance if the refrigerator is used as a heat pump is 9.5.
"Your question is not complete, it seems to be missing the following information";
A certain refrigerator, operating between temperatures of -8.00°C and +23.2°C, can be approximated as a Carnot refrigerator.
What would be the coefficient of performance if the refrigerator (operating between the same temperatures) was instead used as a heat pump?
Learn more about coefficient of performance here: https://brainly.com/question/20713684
A block of mass, m, sits on the ground. A student pulls up on
the block with a tension, T, but the block remains in contact
with the ground. What is the normal force on the block?
Answer a
Explanation: a
Marie walks to the store, 10 blocks east of home. She returns home for lunch and then goes back to the school in 1.5 hours. What is her displacement? What is her speed?
The speed and displacement are 6.66 m/s and 10 blocks east, respectively. The total distance traveled is larger than the displacement between those two points if an object changes direction while traveling.
Displacement: Is it a distance?
Sometimes people mistakenly believe that distance and displacement are simply two different labels for the same thing. Displacement and distance, however, are two distinct ideas. The overall distance traveled by an object during its voyage will be larger than the displacement if it changes direction.
What does displacement mean in one sentence?
The smallest (straight line) distance between a body's initial location and its final position—represented by an arrow pointing from the starting position to the final position—is referred to as a body's displacement when it moves from one position to another.
Briefing:
speed=10/1.5
=6.66m/s
displacement=10 block toward east.
To know more about displacement visit:
https://brainly.com/question/11934397
#SPJ1
A 2150 kg car, moving east at 10.0 m/s, collides and joins with a 3250 kg car. The cars move east together at 5.22 m/s. What is the 3250 kg car’s initial velocity calculated to the nearest tenth? Record your answer in the boxes below. Be sure to use the correct place value.
Answer:
2.1 m/s
Explanation:
According to law of conservation of momentum;
m1u1 + m2u2 = (m1+m2)v
m1 and m2 are the masses
u1 and u2 are the initial velocities
v is the common velocity
Given
m1 = 2150kg
m2 = 3250kg
u1 = 10.0m/s
u2 = ?
v = 5.22m/s
Substitute and get u2
2150(10) + 3250u2 = (2150+3250)5.22
21,500 + 3250u2 = 5400(5.22)
3250u2 = 28,188 - 21500
3250u2 = 6688
u2 = 6688/3250
u2 = 2.1 m/s
Hence the 3250 kg car’s initial velocity has an initial velocity of 2.1 m/s
A major league pitcher can throw a baseball an excess of
Ok I am done waiting for an answer for 5 hours can somebody PLEASE PLEASE PLEASE help me TIMED ASSESMENT HERE!!!! PLEASE
A graph titled Speed as a Function of Time with horizontal axis time (seconds) and vertical axis speed (meters per second). A straight orange line labeled A starts at 0 seconds 4 meters per second and runs to 6 seconds 7 meters. A straight blue line labeled B starts at 0 seconds 4 meters and upward to 6 seconds 4 meters. A straight green line starts at 0 seconds 4 meters and runs to 4 seconds 0 meters.
Use the graph of speed versus time to answer the questions about acceleration.
Which of the cars is speeding up?
Which of the cars is slowing down?
Which of the cars is maintaining a constant speed?
Answer:
Explanation:
I'm going to assume that all the givens are in m/s. If I am correct, The orange line is speeding up. It is going from 4 m/s to 7 m/s. Its slant is from lower left to upper right. It is increasing in speed.
The green line is slowing down. It is going from 4 to 0 m/s. It's slant is from upper left to lower right.
The blue line is horizontal. It is neither slowing down or speeding up.
Answer:
sorry for being very very very late, but here is your answer)
car speed A
car slow down C
car constant speed B
hope this helped!!!!
The decibel scale intensity for busy traffic is 80 dB. Two people having a loud conversation have a decibel intensity of 70 dB. What is the approximate combined sound intensity?
Given :
The decibel scale intensity for busy traffic is 80 dB.
Two people having a loud conversation have a decibel intensity of 70 dB.
To Find :
The approximate combined sound intensity.
Solution :
We know, intensity in decibel can be converted to W/m² by :
[tex]\beta(dB) = 10\ log_{10}( \dfrac{I}{I_o})[/tex]
Putting intensity in decibel scale, we get :
[tex]I(80\ dB ) =10^{-4}\ W/m^2\\\\I(70\ dB ) = 10^{-5}\ W/m^2[/tex]
Let, combine intensity is I .
I = I(80 dB) + I(70 dB)
[tex]I = 10^{-4} + 10^{-5} \ W/m^2\\\\I = 1.1 \times 10^{-4} \ W/m^2[/tex]
Therefore, the combined sound intensity is [tex]1.1 \times 10^{-4} \ W/m^2[/tex] .
Bill and Janet are pulling on opposite sides of a table. Bill pulls with a force of 250 N to the left, and Janet pulls with a force of 325 N to the right. What is the net force on the table?
Answer: 75 N to the right
Explanation:
When two forces acting in opposite directions, they will cancel in magnitudes. Here, the net force acting on the table is 75 N to the right.
What is force?Force is an external agent acting on an object to change its motion or to deform it. Force is a vector quantity. Hence, it is characterized by a magnitude and direction.
If two equal forces are acting on object from the same direction, they will add up in magnitudes and the net force is their sum. If the two forces are from opposite directions, they will cancel each other in magnitude and the net force will be the substracted value.
Here, Bill is pulling by 250 N to the left and Janet is pulling to the right by 325 N. The force is not balanced because they are unequal.
net force = 325 - 250 = 75 N
The larger force is to the right. Hence, the net force is 75 N to the right.
Find more on net force:
https://brainly.com/question/13410291
#SPJ2
a wandering dog walks 1 km due east, 1 km due south, then runs 2 km due west. the magnitude of the dogs displacement is closest to
a. 0 km
b. 1.4 km
c. 3.4 km
d. 4.0 km
Answer:
b) 1.4km
Explanation:
What is the most important factor that determines the thickness, and therefore strength, of the lithosphere?
Answer:
Internal temperature
Explanation:
The temperature of the lithosphere has been said to vary across range of temperature values. From a temperature of the crust of about zero degrees Celsius (or 32 degrees Fahrenheit) to a temperature of around 500 degrees Celsius (932 degrees Fahrenheit) for that of the upper mantle. This said temperature is the most crucial factor in determining the strength, the thickness and thereof of the lithosphere
Calculate the mechanical advantage of a ramp if the box you are trying to move has a mass of 10 kilograms, the
board is 15 feet long and the height of the ramp is 5 feet .
3
300
150
45
Answer:
[tex]MA = 3[/tex]
Explanation:
Given
[tex]Box = 10kg[/tex]
[tex]Ramp\ Height = 5ft[/tex]
[tex]Ramp\ Length = 15ft[/tex]
Required
Determine the mechanical advantage
This is calculated as follows:
[tex]MA = \frac{Ramp\ Length}{Ramp\ Height}[/tex]
[tex]MA = \frac{15ft}{5ft}[/tex]
[tex]MA = 3[/tex]
Hence, the mechanical advantage is 3
what is the difference between total distance covered vs. total displacement of the rube goldberg
Answer:
The deer traveled 1300m + 500m + 300m, for a total distance. The exact same motion, distance and displacement have significantly different values. It tells you the rate at which an object's displacement, or position, changes.
Total distance covered is amount of distance cover during the course whereas total displacement is difference between initial and final position.
What is distance?Distance is the sum of an object's movements, regardless of direction. Distance can be defined as the amount of space an object has covered, regardless of its starting or ending position.
What is displacement?The term "displacement" refers to a shift in an object's position. It is a vector quantity with a magnitude and direction. The symbol for it is an arrow pointing from the initial location to the ending place. For instance, if an object shifts from location A to position B, its position changes. Displacement is the term used to describe this shift in an object's position.
Hence total distance covered and total displacement are different. Total distance covered is amount of distance cover during the course whereas total displacement is difference between initial and final position.
Learn more about displacement here:
https://brainly.com/question/11934397
#SPJ2
A heat pump has a coefficient of performance of 3.85 and operates with a power consumption of 7020 W. How much energy does it deliver into a home during 1 h of continuous operation?
Answer:
97.3 MJ
Explanation:
The formula for the coefficient of Perfomance is given as
COE = Q/W, where
COE is the coefficient of Perfomance
Q is the heat provided
W serves as the work input.
Dividing both sides of the equation by a factor of time t, we get the coefficient of Perfomance in terms of heating power and input power, so we say
COE = P / P(i),
making heating power, P the subject of formula, we have
P = COE * P(i)
P = 3.85 * 7020 * 1 * 3600
P = 97297200 J
P = 97.3 MJ
How would the mass and weight of an object on the Moon compare to the mass and weight of the same object on Earth? * Mass and weight would both be less on the Moon. Mass would be the same but its weight would be less on the Moon. Mass would be less on the Moon and its weight would be the same. Mass and weight would both be the same on the Moon.
Answer:
B. Mass would be the same but its weight would be less on the Moon.
Explanation:
The mass of a body can be expressed as the quantity of matter it contains. While the weight of a body is the extent of the gravitational force impressed on the body by a massive body.
Thus, the mass of a body is constant either on the Earth or on the Moon. But the weight would be less on the Moon because the gravitational force on the Moon is far less than that on the Earth. Therefore the weight would be less on the Moon.
The appropriate option is B.
The mass will remain same on both moon and Earth, but weight will be lesser on Moon than Earth. Hence, option (B) is correct.
The prime focus to solve this problem is the mass and weight of an object. The mass of a body can be expressed as the quantity of matter it contains. While the weight of a body is the extent of the gravitational force impressed on the body by a massive body.
So, the mass of a body is constant either on the Earth or on the Moon. But the weight of an object will depend on the mass and the gravitational acceleration.
W = mg
Here, W is weight, m is mass and g is gravitational acceleration.
Weight would be less on the Moon because the gravitational force on the Moon is far less (due to lower value of g) than that on the Earth. Therefore the weight would be less on the Moon.
Thus, we can conclude that the mass will remain same on both moon and Earth, but weight will be lesser on Moon than Earth. Hence, option (B) is correct.
Learn more about the mass and weight here:
https://brainly.com/question/13040516
A student throws a baseball upwards at an angle of 60 degrees to the horizontal. The initial horizontal and vertical components are 12.5 m/s and 21.7 m/s, respectively. What position will have the greatest magnitude of vertical acceleration
Answer:
All positions have constant acceleration
Explanation:
Projectiles have two velocity component; a vertical velocity and a horizontal velocity. The horizontal velocity is constant while the vertical velocity is acted upon by the force of gravity, causing a change of vertical velocity.
If the air resistance is negligible, the acceleration of a projectile would be constant and equal to the acceleration due to gravity. This means that the acceleration for a projectile is the same at every point in its trajectory.
A rigid tank contains an ideal gas at 300 kPa and 600 K. Now half of the gas is withdrawn from the tank and the gas is found at 100 kPa at the end of the process. Determine (a) the final temperature of the gas and (b) the final pressure if no mass was withdrawn from the tank and the same final temperature was reached at the end of the process.
If the social distancing length between two students is doubled from two metered to four meters, does the gravitational force between the two students increase or decrease?
Explain your reasoning!
Answer:
the gravitational force decreases