Answer:
P₂ = 261 KPa
Explanation:
Given data:
Volume of sample = 200 mL
Initial pressure = 110 KPa
Initial temperature = 275 K
Final volume = 95 mL
Final temperature = 310 K
Final pressure = ?
Solution:
Formula:
P₁V₁/T₁ = P₂V₂/T₂
P₂ = P₁V₁T₂ /T₁ V₂
P₂ = 110 KPa× 200 mL× 310 K /275 K × 95 mL
P₂ = 6820000 KPa / 26125
P₂ = 261 KPa
If 150 G of war started burning 300 G of where as was left behind how many grams of CO2 gas is released
Answer:
geruow0irghvn3p0unhie0ghik
Explanation:
which process explains how rock that formed underground is now aboveground in sierra nevada
Answer:
formation process
Explanation:
farllon plate was fully subducted along pacific coast line
The cascade mountains formed from the igneous rocks by plate movement are younger and they are formed by the uplift of plates makes them appears aboveground in sierra Nevada.
What are cascade mountains in Sierra Nevada ?Since they were formed by melting above a subduction zone, the Cascades and Sierra Nevada's rocks are largely igneous. The Cascades, which initially arose 36 million years ago and are still forming now, are younger mountains.
In contrast, the Nevadan Orogeny, which occurred over 200 million years ago, is when the plutonic core of the Sierra Nevada started to form. When subducting at a sharp angle, oceanic lithosphere at the edge of the North American continent melted, and the magma surged back through the continental crust to form a volcanic arc.
The once-deep granite batholith that makes up today's Sierra Nevada was exposed by erosion after being raised by the North American plate. Although one small spur is located in Nevada, the elevated granitic intrusion is 640 kilometers long and largely located in California.
Find more on rocks in Sierra Nevada:
https://brainly.com/question/21856412
#SPJ3
Loose sugar dissolves much faster than a sugar cube because loose sugar?
A. Has greater surface area
B. Has less kinetic energy
C. Has a higher temperature
D. Has greater surface tension
Loose sugar dissolves much faster than a sugar cube because loose sugar (a) has greater surface area.
When any solute dissolve in ground into small pieces it dissolve faster in solvent than large pieces because in small ones the large surface area is exposed into solvent.
With the greater surface area is exposer, the contact in between the solute particles and the solvent is more. this is the reason that loose sugar cube dissolve much faster than sugar cube as sugar cube has less surface area in contact with solvent.
Thus, Loose sugar dissolves much faster than a sugar cube because loose sugar (a) has greater surface area.
To learn more about solubility here
https://brainly.com/question/8685116
#SPJ1
1. Why is soil erosion relatively less in dense forests as compared to barren, open fields?
Because the deep roots of big trees hold the soil and don't let it slip away simply by rain or wind.
Answer:
the roots of the trees keep the soil in place opposed to a barren landscape that has little to no plants to keep the soil in place
hope this helps (╹ڡ╹ )
Niels Bohr’s model of the atom helped to explain
Answer:
a theory for the hydrogen atom based on quantum theory that energy is transferred only in certain well defined quantities. Electrons should move around the nucleus but only in prescribed orbits.
Explanation:
how do i caculate velocity
Answer:
Velocity Equation in these calculations:
Final velocity (v) of an object equals initial velocity (u) of that object plus acceleration (a) of the object times the elapsed time (t) from u to v.
Explanation:
Is vacuole a plant or animals cell
Answer:
plant
Explanation:
let me know if correct
Which part of the atom can be transferred from one atom to another to form
ions?
a. Protons
b. Neutrons
c. Valence Electron
d. Nucleus
Answer:
Explanation: Valance Electron
What is the total number of atoms in 0.20 mol of propanone, CH3COCH3?
NA = 6.022 x 1023
1.2 x 1022
1.2 x 1023
6.0 X 1024
6.0 x 1023
Answer:
1.2×10²³ atoms.
Explanation:
Data obtained from the question include:
Mole of propanone = 0.20 mole
Number of atoms of propanone =.?
From Avogadro's hypothesis, we understood that 1 mole of any substance contains 6.022×10²³ atoms.
This implies that 1 mole of propanone also contains 6.022×10²³ atoms.
Thus, we can obtain the number of atoms in 0.20 mole of propanone as illustrated below:
1 mole of propanone contains 6.022×10²³ atoms.
Therefore, 0.20 mole of propanone will contain = 0.2 × 6.022×10²³ = 1.2×10²³ atoms.
Thus, 0.20 mole of propanone contain
1.2×10²³ atoms.
The total number of atoms in 0.20 mole of propanone is 1.2×10²³, i.e. in given mole 1.2×10²³ atoms of propanone is present.
How many atoms present in one mole?In one mole of any substance 6.022 × 10²³ atoms of that substance will present, and this number is known by the name of Avogadro's number.
We have given moles of propanone = 0.20 mole
No. of atoms present in 0.20 mole of propanone = 0.20 × 6.022×10²³ = 1.2×10²³.
Hence, 1.2×10²³ atoms are present in given moles.
To know more about Avogadro's number, visit the below link:
https://brainly.com/question/10614569
List the elements that make up the compound copper sulfate
Mrs. Franklin loves teaching science and thinks about it all the time. While walking one day, she steps on a warm, fresh piece of used gum. The gum flattens and sticks to her shoe. When she lifts her foot, she sees long strings of gum between her shoe and the sidewalk. She thinks, "What a great demonstration of the properties of metals!"
What properties of metals would Mrs. Franklin most likely teach about with this demonstration?
conductivity and luster
ductility and malleability
malleability and reactivity
conductivity and ductility
Answer:
Ductility and Malleability
Explanation:
Pls mark my answer as brainliest
Answer:
the correct answer is Ductility and Malleability....(B)....
Explanation:
I took the test, hope this helps. also the person above me is correct
Use the model to answer the question.
Which element symbol actually represents the model?
Plz answer
Answer:
B
Explanation:
Boron has 5 protons.
State the career function of mechanical engineering
Answer:
Mechanical engineers design power producing machines, like electric generators, internal combustion engines, and steam and gas turbines, also power using machines, such as refrigeration and air-conditioning systems. Mechanical engineers design other machines inside buildings, such as elevators and escalators.
Explanation:
Explain how the isotopes and ions of an atom differ.
Answer:
istopes is a situation in which each of two or more forms of same element that contain equal number of proton....while ions of an atoms are with extra electrons or missing electrons so they tends to differ
Which of the following best describes a hypothesis?
A. An explanation that is supported by scientific data
B. A proven explanation for experimental results
c. A possible answer to a scientific question
D. A question about the natural world
please help i will give brainliest
Which of the following subatomic particles are found surrounding the nucleus and have a negative charge?
F negatrons
G neutrons
H protons
J electrons
Answer:
J electrons
Explanation:
Electrons are the negatively charged subatomic particles that surrounds the nucleus of an atom.
Electrons occupy the bulk volume of an atom. These particle was discovered by J.J ThomsonThey found orbiting the extra-nuclear space of every atom. The nucleus is made up of protons and neutrons.Which states of matter can form solutions?
A. Gas-liquid
B. Solid-solid
C. Solid-liquid
D. All of the above
Answer:
c
Explanation:
spongebob cheese pants
Answer:
I believe D
Explanation:
im not super sure but I'm pretttyyy sure
The density of lead is 11.4g/cm3. What volume, in ft3, would be occupied by 10.0 g of lead?
Answer:
The volume is 3.09 ft^3.
Explanation:
The formula for volume is mass divided by density. 10.0 g / 11.4 g/cm^3 = 0.87719. Converted to cubis foot is 3.09 ft^3. I hope this helps you.
how many sig figs are in 0.0093
Answer:
there are two significant figures
Explanation:
Answer:
there are two
Explanation:
because the zeros dont count
K20
Molar Mass (g/mole)
2(39.10) + 16.00 = 94.20 g/mole
Moles
5.85 moles
Mass (grams)
Particles
Answer:
yes
Explanation:
that is the answer
How many grams of glucose are in 4.5x1023 molecules of glucose?:
Answer:
[tex].5865 \\ \\ \\ \\ \\ \5865[/tex]
[tex] \\ \\ 5865 \inf \inft \cos( \\ \) [/tex]
If the momentum of a car is reduced by half, assuming mass did not change, what must also have been reduced by half?
Answer:
Velocity is halved
Explanation:
Momentum is contingent on mass and velocity. The quantity of motion in a body is called the momentum of the body.
Momentum = mass x velocity
Now, if mass does not change and momentum is reduced by half, it suggests that the velocity was reduced by half.
Velocity is directly related to momentum.
A state property X has a value 89.6 units. It undergoes the following changes, first increase by
3.6 units, then increase by another 18.7 units, then decrease by 12.2 units and finally attains a
value of 85.5 units The value for this series of change is A) 14.2 units
B) -4.1 units C) 108.3 units
D) uncertain
Answer:
B) -4.1 units
Explanation:
According to this question, a state property X has a value 89.6 units. It undergoes the certain changes as follows:
- first increase by 3.6 units
- then increase by another 18.7 units
- then decrease by 12.2 units
- and finally attains a value of 85.5 units
This can be mathematically represented by 89.6 - {3.6 + 18.7 - 12.2 - x) = 85.5
To get x, we say;
89.6 + 3.6 = 93.2
93.2 + 18.7 = 111.9
111.9 - 12.2 = 99.7
99.7 - 85.5 = 14.2units.
The changes that occured is represented as follows:
= (3.6 + 18.7) - (12.2 + 14.2)
= 22.3 - 26.4
= -4.1 units
write the complete balanced equation for the decomposition of AI(CIO3)3.
Answer:
2AL(ClO3)3 → 2ALCl3 + 9O2
Explanation:
what is the name of the compound represented by the formula SI2BR6
Answer:
Disilicon Hexabromide
Explanation:
A compound H2O is named – Dihydrogen monoxide. Its common name is of course water. A compound of Si2Br6 is named – Disilicon Hexabromide. 2.
In lab you reacted 60 grams of propane (C3H8) with 13 grams of oxygen gas (O2). Your
reaction made 63 grams of water (H2O). The reaction is shown below:
How much carbon dioxide (CO2) is released into the air?
C3H8 + 5O2 ------> 3CO2 + 4H2O
10 g
73 g
120 g
1368
Answer:
120g
Explanation:
Based on the reaction, when 1 mole of propane and 5 moles of oxygen react, 3 moles of CO2 and 4 moles of H2O are produced. The ratio of production is 3 moles of CO2 per 4 moles of H2O.
Thus, we need to convert mass of water to moles using its molar mass:
Moles H2O (Molar mass: 18g/mol):
63g H2O * (1mol / 18g) = 3.5 moles H2O
Converting to moles of CO2:
3.5 moles H2O * (3 moles CO2 / 4 moles H2O) = 2.625 moles CO2
Mass CO2 (Molar mass: 44g/mol):
2.625 moles CO2 * (44g / mol) = 115.5g of CO2 are released
120gWhen 2.5 moles of N2 react according to the reaction below, how many moles of NH3 will be produced?
N2 + 3 H2 --> 2 NH3
O 2.5 moles NH3
0 2.0 moles NH3
O 1.3 moles NH3
5.0 moles NH3
Answer:
5 mol
Explanation:
by stoichiometry
nN2/1=nNH3/2
2.5=nNH3/2
nNH3=2.5×2
nNH3= 5 mol
Answer: I got 5.0 moles
Explanation:
6H2 represents how many atoms of hydrogen?
Answer:
i think its 12, but i'm not 100% sure
Explanation:
Which of these products was made using a renewable resource?
O A. Paper plate
O B. Aluminum can
O C. Copper pan
O D. Plastic bag
Answer:
paper plate
Explanation:
A renuable source is a source that would replenish in ones lifetime. Trees make paper and grow in the span of a average human life.
Express in scientific notation. Choose the answer with the proper number of significant figures. 9x10^9/4.5x10^1
Answer:
Your answer should be 2.4 x 10^9. please hit the crown
Explanation: