Answer:
Water in the ocean
Explanation:
The water in the ocean is always moving so all the molecules are was well
Which determines the reactivity of an alkali metal?
a. it's boiling and melting points
b. the shininess of its surface
c. the number of protons it has
d. it's ability to lose electrons
Answer:
d. It's ability to lose electrons
You have two containers. The first container contains 22.99 grams of solid
sodium (Na). The second container contains 15.999 grams of Oxygen (O).
Which container has more moles of the indicated substance? *
Answer:
The sodium has more moles.
n(Na)=2.09 mole
n(O)=0.999 mole
What happens to the gravitational potential energy of an object if you bring it higher with respect to the ground? *
Answer:
Increases
Explanation:
The gravitational potential energy of an object increases as you bring it higher with respect to the ground.
Gravitational potential energy depends on the mass, height and gravity between two bodies;
Gravitational potential energy = mgh
m is the mass
g is the height
h is the height
We can clearly see that the higher the elevation, the more the value of the gravitational potential energy.In a classroom, which comparison would a teacher most likely use for describing a mole?
a cup of water and a liter of oil
a dozen eggs and a dozen jellybeans
a jar of jellybeans and a gram of salt crystals
20 marbles in a bag and 10 large ice cubes
Answer:
B
Explanation:
a mole is "a chemist's dozen" lol
What volume of a 0.181 M nitric acid solution is required to neutralize 25.1 mL of a 0.167 M calcium hydroxide solution
Answer:
46.32 mL
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated below:
2HNO₃ + Ca(OH)₂ —> Ca(NO₃)₂ + 2H₂O
From the balanced equation above,
The following data were obtained:
Mole ratio of the acid, HNO₃ (nA) = 2
Mole ratio of the base, Ca(OH)₂ (nB) = 1
Next, we shall write out the data obtained from the question. This includes:
Molarity of the acid, HNO₃ (Ma) = 0.181 M
Volume of the base, Ca(OH)₂ (Vb) = 25.1 mL
Molarity of the base, Ca(OH)₂ (Mb) = 0.167 M
Volume of the acid, HNO₃ (Va) =?
Finally, we shall determine the volume of the acid, HNO₃ as shown below:
MaVa/ MbVb = nA/nB
0.181 × Va / 0.167 × 25.1 = 2/1
0.181 × Va / 4.1917 = 2
Cross multiply
0.181 × Va = 4.1917 × 2
0.181 × Va = 8.3834
Divide both side by 0.181
Va = 8.3834 / 0.181
Va = 46.32 mL
Therefore, the nitric acid, HNO₃ required for the reaction is 46.32 mL
9. What are the advantages of using an indicator to inform pH measurements? What are the advantages of using a pH meter?
Answer:
The advantages of using an indicator to inform pH measurements:
It gives a mathematically result of the pH, in addition, it gives the precise pH of solvent, and it also gives an idea of the straight of the solution also.
Now, the advantage of using a pH meter:
It is a rapid method to characterize between acids, bases. However, this method does not show how strong acid or base actually are, plus it tends to gives a range of acidity or basicity not quite accurate as a result.
A very new item just arrived in the market. It is very good for construction, and other things. Now, this item has chemicals, and in every drop, there are 400 grams of NaCI. If there are 10 drops in this item, how many grams of NaCI are in one bottle?
Answer: 4,000 grams of NaCI
Explanation:
We know that there are 400g of NaCI in one drop.
This bottle has 10 drops of this item.
So, we have to multiply the amount of NaCI in a drop by the amount of drops.
400 x 10 = 4,000.
The answer to the question is 4,000. Hope this helps!
How many milliliters of 2.00 M H2SO4 will react with 28.0 g of NaOH?
Taking into account the reaction stoichiometry and the definition of molarity, 175 mL of 2 M H₂SO₄ will react with 28.0 g of NaOH.
Reaction stoichiometryIn first place, the balanced reaction is:
H₂SO₄ + 2 NaOH → Na₂SO₄ + 2 H₂O
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
H₂SO₄: 1 moleNaOH: 2 moles Na₂SO₄: 1 moleH₂O: 2 molesThe molar mass of the compounds is:
H₂SO₄: 98 g/moleNaOH: 40 g/moleNa₂SO₄: 142 g/moleH₂O: 18 g/moleThen, by reaction stoichiometry, the following mass quantities of each compound participate in the reaction:
H₂SO₄: 1 mole× 98 g/mole= 98 gramsNaOH: 2 moles× 40 g/mole= 80 gramsNa₂SO₄: 1 mole× 142 g/mole= 142 gramsH₂O: 2 moles× 18 g/mole= 36 gramsDefinition of molarityMolar concentration or molarity is a measure of the concentration of a solute in a solution and indicates the number of moles of solute that are dissolved in a given volume.
The molarity of a solution is calculated by dividing the moles of solute by the volume of the solution:
[tex]Molarity= \frac{number of moles}{volume}[/tex]
Molarity is expressed in units [tex]\frac{moles}{liter}[/tex].
Moles of H₂SO₄ requiredThe following rule of three can be applied: If by reaction stoichiometry 80 grams of NaOH react with 1 mole of H₂SO₄, 28 grams of NaOH react with how many moles of H₂SO₄?
[tex]moles of H_{2}S O_{4} =\frac{28 grams of NaOHx1 mole ofH_{2}S O_{4} }{80 grams of NaOH}[/tex]
moles of H₂SO₄= 0.35 moles
Volume of H₂SO₄ requiredIn this case, you know:
Molarity= 2 M= 2 [tex]\frac{moles}{liter}[/tex]amount of moles= 0.35 molesReplacing in the definition of molarity:
[tex]2 \frac{moles}{liter}= \frac{0.35 moles}{volume}[/tex]
Solving:
2 [tex]\frac{moles}{liter}[/tex] × volume= 0.35 moles
volume= 0.35 moles ÷ 2 [tex]\frac{moles}{liter}[/tex]
volume= 0.175 liters= 175 mL (being 1 L= 1000 mL)
Finally, 175 mL of 2 M H₂SO₄ will react with 28.0 g of NaOH.
Learn more about
the reaction stoichiometry:
brainly.com/question/24741074
brainly.com/question/24653699
molarity:
brainly.com/question/9324116
brainly.com/question/10608366
brainly.com/question/7429224
#SPJ1
SO3 is a covalent compound with no lone pairs on the central S atom. What's the structure of a molecule of SO3? Is an SO3 molecule polar or non-polar?
Question 14 options:
A)
Trigonal planar, non-polar
B)
Trigonal pyramidal, polar
C)
Trigonal planar, polar
D)
Trigonal pyramidal, non-polar
Answer:
A
Explanation:
it has non polar molecule, because it has the equal sharing of electrons, so equal repulsion from all sides. atoms are equally represented.
Answer:
Trigonal planar, non-polar
Explanation:
5. What is the pH of an aqueous solution of the strong acid, Perchloric Acid (HClO4), with a concentration of 0.007 M?
Can someone please help me quick !!!
2. Suppose 13.7 g of C2H2 reacts with 18.5 g O2 according to the reaction below. C2H2(g) + O2(g) → CO2(g) + H2O(ℓ) a. What is the mass of CO2 produced? b. What is the limiting reagent?
Answer:
Mass of CO₂ produced = 20.328 g
Oxygen is limiting reagent.
Explanation:
Given data:
Mass of C₂H₂ = 13.7 g
Mass of O₂ = 18.5 g
Mass of CO₂ produced = ?
What is limiting reagent = ?
Solution:
Chemical equation:
2C₂H₂ + 5O₂ → 4CO₂ + 2H₂O
Number of moles of C₂H₂:
Number of moles = mass /molar mass
Number of moles = 13.7 g/ 26.04 g/mol
Number of moles = 0.526 mol
Number of moles of O₂:
Number of moles = mass /molar mass
Number of moles = 18.5 g/ 32 g/mol
Number of moles = 0.578 mol
Now we will compare the moles of CO₂ with C₂H₂ and O₂
C₂H₂ : CO₂
2 : 4
0.526 : 4/2×0.526 = 1.052
O₂ : CO₂
5 : 4
0.578 : 4/5×0.578 = 0.462
The number of moles of CO₂ produced by O₂ are less thus oxygen will be limiting reactant.
Mass of CO₂ produced:
Mass = number of moles × molar mass
Mass = 0.462 mol × 44 g/mol
Mass = 20.328 g
Considering the patterns you have noticed in this activity, which statement best explains why a compound with the molecular formula CH3 doesn't exist in nature?
A. Hydrogen typically needs four bonds to reach a noble gas configuration.
B. Carbon needs more than just three bonds to reach a noble gas configuration. C. The chemical CH3 does not react with other substances because of its high stability.
D. CH3 has three double bonds, which fails to give it a noble gas configuration
Answer:
The answer is B
Explanation:
I had the same question and I chose B and it was correct.
Answer:
B. Carbon needs more than just three bonds to reach a noble gas
Explanation:
PLATO ANSWER
PLATO EXPLANATION-
Each hydrogen atom can make only one bond, but a carbon atom needs four bonds to be stable. Therefore, three hydrogen atoms are not enough for the carbon atom to make four bonds.
Ammonia, NH3 is a common base with Kb of 1.8 X 10-5. For a solution of 0.150 M NH3:
Write the equation for the ionization of ammonia in water.
List all species present in the solution AND determine the concentrations of each.
Determine the pH of this solution.
The concentrations : 0.15 M
pH=11.21
Further explanationThe ionization of ammonia in water :
NH₃+H₂O⇒NH₄OH
NH₃+H₂O⇒NH₄⁺ + OH⁻
The concentrations of all species present in the solution = 0.15 M
Kb=1.8 x 10⁻⁵
M=0.15
[tex]\tt [OH^-]=\sqrt{Kb.M}\\\\(OH^-]=\sqrt{1.8\times 10^{-5}\times 0.15}\\\\(OH^-]=\sqrt{2.7\times 10^{-6}}=1.64\times 10^{-3}[/tex]
[tex]\tt pOH=-log[OH^-]\\\\pOH=3-log~1.64=2.79\\\\pH=14-2.79=11.21[/tex]
A 500.0-mL buffer solution is 0.100 M in HNO2 and 0.150 M in KNO2. Determine if each addition would exceed the capacity of the buffer to neutralize it.
a. 250 mg NaOH
b. 350 mg KOH
c. 125 g HBr
d. 1.35g Hl
Answer:
no one additions exceed the capacity of the buffer
Explanation:
given
Volume buffer = 500.0 mL = 0.5 L
mol HNO₂ = 0.5 L × 0.100 mol/L = 0.05 mol HNO₂
mol NO₂⁻ = 0.5 L × 0.150 mol/L = 0.075 mol NO₂⁻
solution
we know when any base more than 0.05 (HNO2) than exceed buffer capacity
and when any base more than 0.075 (KNO2) than exceed buffer capacity
when we add 250 mg NaOH (0.250 g)
than molar mass NaOH =40 g/mol
and mol NaOH = 0.250 g ÷ 40g/mol
mol NaOH = 0.00625 mol
0.00625 mol NaOH will be neutralized by 0.00625 mol HNO₂
so it would not exceed the capacity of the buffer.
and
when we add 350 mg KOH (0.350 g)
than molar mass KOH =56.10 g
and mol KOH = 0.350 g ÷ 56.10 g/mol
mol KOH = 0.0062 mol
here also capacity of the buffer will not be exceeded
and
now we add 1.25 g HBr
than molar mass HBr = 80.91 g/mol
and mol HBr = 1.25 g ÷ 80.91 g/mol
mol HBr = 0.015 mol
0.015 mol Hbr will neutralize 0.015 mol NO₂⁻
so the capacity will not be exceeded.
and
we add 1.35 g HI
molar mass HI = 127.91 g/mol
so mol HI = 1.35 g ÷ 127.91 g/mol
mol HI = 0.011 mol
capacity of the buffer will not be exceed
what is the source of the force that moves the tectonic plates along this plate boundary
Answer:
Mantle convection
Explanation:
The source of the force that moves tectonic plates along plate boundaries is as a result of the mantle convection.
Heat energy produced in the mantle especially from radioactive decay is a very important source of internal heat that drives plate motion. Denser and cold materials close to the over-riding lithosphere above sinks deep into the mantle. Hotter and lighter materials rises to the surface. This sets up a convection cell by which the plates above are driven.what are the reactants in a cheese sandwich
Answer:
cheese and bread
Explanation:
2 bread 1 cheese = cheese sandwich
Sulfur has an electronegativity of 2.58, while Cesium has a value of 0.79. Based on this information, they would have what kind of chemical bond?
Answer:
Ionic
Explanation:
Because sulphur is a non-metal and cesium is part of the group 1 Alkali Metals, this creates an ionic bond
Ionic bonds are created from one metal and one non-metal element.
This still is declared as Ionic despite the balance of this is Cs2S
As you move from N to Bi, the metallic properties of the element
A. increases.
C. remains the same.
B. decreases.
D. does not follow a trend.
Answer:
b. decreases
Explanation:
i just took a test on it
As you move from N to Bi, the metallic properties of the element decrease. The correct option is B.
What are nitrogen and bismuth?Nitrogen is a chemical element, whose chemical element is N. Nitrogen is a gas and its atomic number is 7. It is a non-metal and is present in group 15 of the periodic table.
Bismuth is a chemical element, whose chemical element is Bi. It is a post-transition metal, and it is also present in group 15 of the periodic table near arsenic and antimony. Its atomic number is 83.
Now, nitrogen and bismuth are present in the same line and group. Nitrogen is the first element of the group and going down, there is bismuth present in the group last. So the metallic property decreases from going down the group.
Thus, the correct option is B. decreases.
To learn more about nitrogen and bismuth, refer to the link:
https://brainly.com/question/24309770
#SPJ2
Brad pushed a shopping cart directly toward his car at a constant velocity for 6.0 seconds.
During that time, Brad's daughter jogged past him at 2.4 meters per second, and the cart
moved 6.6 meters. What was the cart's velocity?
Answer:
Watch Naruto that's the answer
Explanation:
A sample of compound contains 5.65x10 21 molecules molar mass of the compound is 89.06g/ mol determine the mass of the sample in grams
Answer:
Explanation:
no of molecules=5.65*10^21
NA=6.23*10^23
no of moles=no of molecules/avogadro number
no of moles=5.65*10^21/6.23*10^23
no of moles=9.07*10^-3
now we know that
no of moles=mass/molar mass
mass=no of moles*molar mass
mass=9.07*10^-3*89.06
mass=0.808 g
how many moles of nitroge are there in 50.0 g of nitrogen?
1.785714286 moles
The number of moles (n) for nitrogen is: [ n=50.0÷28.0 ] = 1.785714286 moles.
The internal energy of reaction is -855.1). The reaction has a change of
temperature of 63.20°C that consist of 8.85g of material. Assume the
heat capacity of 2.650J/g °C. What is the work energy of this process..
The work energy of this process : 2337.298 J
Further explanationThe laws of thermodynamics 1 state that: energy can be changed but cannot be destroyed or created
ΔU=Q-W
Q=m.c.Δt
[tex]\tt Q=8.85\times 2.650\times 63.2=1482.198~J[/tex]
the work (W) :
[tex]\tt W=Q-\Delta U\\\\W=1482.198-(-855.1)=2337.298~J[/tex]
state Graham's law diffusion of gas mathematical expression ?
Answer:
Graham's law states that the rate of diffusion or of effusion of a gas is inversely proportional to the square root of its molecular weight
Explanation:
Which problem that the most scientists believe is partly caused by carbon dioxide?
Answer:
Climate change
Explanation:
Climate change is primarily a problem of too much carbon dioxide (CO2) in the atmosphere. This carbon overload is caused mainly when we burn fossil fuels like coal, oil and gas or cut down and burn forests
Why is Mg++ smaller than Mg atom?
Answer:
The magnesium ion is much smaller than the magnesium atom because magnesium atom contains more electrons as compared to magnesium ion. Explanation: ... Whereas when an atom tends to lose an electron then it acquires a positive charge and size of the atom tends to increase.
Answer:
Because it looses it two electrons to form a stable octet Ionic form..........
The enthalpy change of reaction 1 is -114 kJ mol-1
reaction 1
2NaOH(aq) + H2SO4(aq)
→ Na2SO4(aq) + 2H2O(1)
By using this information, what is the most likely value for the enthalpy change of reaction 2?
reaction 2
Ba(OH)2(aq) + 2HCl(aq) → BaCl2(aq) + 2H2O(1)
Answer:
-114kJ mol-1
Explanation:
Definition of the enthalpy change of neutralization: the energy released with the formation of 1 mole of water when neutralization takes place between an acid and a base.
Since both reactions yield the same number of moles of water, the answer should be -114kJ mol-1.
The statement for the enthalpy change of reaction 2 is "-114 kJ"
What is enthalpy change?The change in enthalpy (ΔH) is a quantity of heat of a system. The enthalpy change is the amount of heat that enters or exits a system during a reaction.
One equivalent of hydrogen ions is neutralised with one equivalent of hydroxide ions in the reaction 1,
NaOH(aq) + HCl(aq) → NaCl(aq) + H2O(l)
The change in enthalpy is given as -114 kJ.
Two equivalents of hydrogen ions are neutralised with two equivalents of hydroxide ions in the reaction 2,
Ba(OH)2 + H2SO4 (aq) → BaSO4 (s) + 2H2O (l)
But, that primary ionic reaction is same for both the reaction in which hydrogen ion combines with hydroxide ion to generate a water molecule. So, the enthalpy change of reaction 1 would be exactly same as for reaction 2.
The neutralization enthalpy comes out to be -114 kJ.
Hence the correct answer is -114 kJ.
Learn more about enthalpy change here
https://brainly.com/question/4526346
#SPJ2
Consider the balanced equation.
CuSO4 + Zn Right arrow. ZnSO4 + Cu
If 200.0 g of copper(II) sulfate react with an excess of zinc metal, what is the theoretical yield of copper?
1.253 g
50.72 g
79.63 g
194.3 g
Answer:
79.63
Explanation:
Is steel wool and vinegar an exothermic reaction? Explain.
Answer:
Vinegar contains acetic acid which removes this coating. When the protective coating is removed, oxygen in the atmosphere can reach the iron in the steel wool and a chemical reaction called oxidation occurs. ... This reaction is also an exothermic reaction. It creates heat energy
Explanation:
hope this helps u
Vinegar incorporates acetic acid which gets rid of this coating. When the defensive coating is removed, oxygen in the environment can reach the iron in the metal wool and a chemical reaction called oxidation occurs. This reaction is additionally an exothermic reaction. It creates warmth energy.
Hope it helped! Have a nice day! <3
3. What is the pairing arrangement of the nitrogenous bases? _____________ pairs with __________ and ____________ pairs with ___________.
Answer:
Adenine pairs with thymine and guanine pairs with cytosine