Answers
Answer:
I think it is synthesis
Answer:
The answer is Synthesis
Explanation:
The two objects combine to make a bigger object
Related Questions
Is this correct?
If the temperature is below the melting point the substance is a solid
If the temperature is above the boiling point the substance is a gas
If the temperature is in between the boiling and melting points the substances a liquid.
Answers
If the normal melting point of a substance is below room temperature, the substance is a liquid at room temperature.
If both the normal melting point and the normal boiling point are above room temperature, the substance is a solid.
what does MA 2 means?
Answers
Answer:
Master-at-Arms Petty Officer 2nd Class. MA2. Machine Accountant Second Class (Naval Rating) Copyright 1988-2018 AcronymFinder.com, All rights reserved.
Explanation:
define atom and give an example
Answers
Answer:
Many atoms consist of a positively charged nucleus composed of protons and neutrons surrounded by a negatively charged cloud of electrons. At its most basic level, an atom is any particle of matter that contains at least one proton. ... Here are some examples of atoms: Neon (Ne) Hydrogen (H)
Explanation:
CAN SOMEONE PLEASE HELP ME ASAP PLEASEE ANYBODY LITERALLY ANYONE OUT THERE PLEASE
Which subatomic particle can be shared between separate atoms?
Answers
Answer:
Electrons
Explanation:
Atoms can combine together and share electrons between them. Atoms that share electrons are linked to each other in a form, called a molecule that is in a lower energy state than either of the separate atoms alone.
Pls Brainliest! It would mean a lot! ;)
A trucker is driving from New Jersey to California to make a delivery of couches. He forgets to adjust the pressure of his tires before his trip and end up blowing out two of his tires while driving through Arizona. Whose law does this example depict? What does this law state? Use the law to explain what happened to the tires.
Answers
Answer:
Gay-Lussac's law.
Explanation:
According to Gay-Lussac's pressure law, it states that the pressure of a given mass of gas is directly proportional to the absolute temperature of the gas, the assumption that the volume is kept constant.
Hence, the trucker's tires were blown up because they were under high pressure as he drove from New Jersey to California, as a result of this intense pressure the temperature of the air in the tires began to rise and it directly affected the pressure of the gas in the tires' tubes which also increased to a point that they ended up blowing out, obeying Gay-Lussac's law.
Which statement best describes insoluble substances? Insoluble substances remain the same when in water. Insoluble substances become part of the liquid substance. Water does not remain when an insoluble substance is added. Insoluble substances change from solid to liquid states.
Answers
Answer:
Insoluble substances remain the same when in water.
Explanation:
When a substance is regarded as insoluble, it means that the substance remains the same in water.
Soluble substances usually form one continuous phase with water when they are added to water (eg when salt is added to water).
However, when camphor is added to water, it does not form a single phase with water. It remains the same in the water and maintains a separate phase from the water. Hence camphor is an insoluble substance.
“Jesus came to serve. How is He calling me to serve?”
Answers
Answer:
...
Explanation:
In the apple activity you completed which of the following is an example of a constant
Answers
Answer: the type of apple because it is an example of a constant
Explanation:
Jakasia needed to find the volume of a plastic container in L to see if the 170 L of
solution that she had would fit inside. She knew that one side was 2.5 ft, the
height of the box was 60 cm, and width of the box was 0.8 m. Use dimensional
analysis to determine if Jakasia's solution will fit in the container.
Answers
Answer:
The solution will fit into the container.
Explanation:
The following data were obtained from the question'
Volume of solution = 170 L
Length of container (L) = 2.5 ft
Height of container (H) = 60 cm
Width of container (W) = 0.8 m
Volume of container (V) =?
Next, we shall express the length, height and breadth I the same unit of measurement. In this case, we shall all in centimetres (cm).
For the length:
1 ft = 30.48 cm
Therefore,
2.5 ft = 2.5 ft × 30.48 cm / 1 ft
2.5 ft = 76.2 cm
Thus the length is 76.2 cm
For the width:
1 m = 100 cm
Therefore,
0.8 m = 0.8 m × 100 cm / 1 m
0.8 m = 80 cm
Thus, the width of the container is 80 cm.
Next, we shall determine the volume of the container as follow:
ength of container (L) = 76. 2 cm
Height of container (H) = 60 cm
Width of container (W) = 80 cm
Volume of container (V) =?
Volume = length × width × height
Volume = 76.2 × 80 × 60
Volume = 365760 cm³
Finally, we shall convert 365760 cm³ to litre (L). This can be obtained as follow:
1000 cm³ = 1 L
Therefore,
365760 cm³ = 365760 cm³ × 1 L/ 1000 cm³
365760 cm³ = 365.76 L
Therefore, the volume of the container is 365.76 L
Since the volume of the container (i.e 365.76 L) is bigger than the volume of the solution (i.e 170 L), therefore, the solution will fit into the container.
PLES help me for brainless
Answers
Answer:
a 1 doesn't belong
Explanation:
Gas has fast moving molecules.
Liquids have slow moving molecules.
Solids have vibrating molecules.
hey guys plz plz plz help me I am struggling I am in middle and struggling to answer this plz help
I have never learned how to calculate the specific heat there is a photo if u know plz answer we have a lot of people trying to figure out how to solve this and know one knows so plz if u know give it your best shot.
thank u I will most definitely appreciate it
and if u answer this correctly I will give 50 point and mark brainliest
of u are just trying to get point u rill be reported
so thanks guys.
Answers
Answer:
I've already answered this one for you. Anyway, please let me know if you have any more questions or need help!
Determine how you would prepare 220 mL of a 0.500 M potassium hydroxide solution starting with: a) solid potassium hydroxide b) a 1.25 M potassium hydroxide solution
Answers
Answer:
a) 6.17 g of solid KOH
b) 88.0 mL of a 1.25 M potassium hydroxide solution
Explanation:
a) We have to determine the mass of solid potassium hydroxide that has to be weighed to prepare 220 mL of a 0.500 M potassium hydroxide solution. We will also require the molar mass of potassium hydroxide, KOH, 56.11 g/mol.
0.220 L × (0.500 mol/L) × (56.11 g/mol) = 6.17 g
b) We will use the dilution rule to determine the volume of the 1.25 M potassium hydroxide solution to be measured.
C₁ × V₁ = C₂ × V₂
V₁ = C₂ × V₂ / C₁
V₁ = 0.500 M × 220 mL / 1.25 M = 88.0 mL
11. How many moles are in 7.14 X 10 35
molecules of 02?
Answers
Answer:
The answer is 1.186 × 10¹² molesExplanation:
To find the number of moles in a substance given it's number of entities we use the formula
[tex]n = \frac{N}{L} \\[/tex]
where n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
From the question
N = 7.14 × 10^35 molecules of O2
We have
[tex]n = \frac{7.14 \times {10}^{35} }{6.02 \times {10}^{23} } \\ [/tex]
We have the final answer as
1.186 × 10¹² molesHope this helps you
(True or False) Only an odd number of orbitals is possible for any electron sublevel?
Answers
Answer:
The statement is true
I found this doing research.
Apparantly, each sub level is made up of one or more orbitals and the orbitals in each sub level are always odd number. Each orbital can only have two electrons and those two electrons will have opposite spin.
Explanation:
Answer:
True
Explanation:
Differences in states of matter are determined by
particle type
particle arrangement
particle color
distance between particles
Answers
Answer:
particle distance
solids are tightly packed
liquids are a little farther apart
and gases are very far
Which of the following is the least likely to remain homogeneous?
. O A. All of these
O B. A supersaturated solution
O C. An unsaturated solution
O D. A saturated solution
Answers
Answer:
all
of them
Explanation:
The number of shovels and cost per 1000 kg for
Ca(OH)2
Answers
Answer:500
Explanation:
The temperature at which a substance in its solid state melts into the same substance in a liquid is known as
Answers
Answer:
0 C
Explanation:
Analyzing a blood sample usually involves which type of separation method?
screening
distillation
centrifugation
filtration
Answers
Answer:
the answer is b
Explanation:
i just did quizz
When the first periodic table of the elements was published, the elements were arranged by atomic mass. Although
several elements seemed out of order, later discoveries showed the order to be correct.
Which event most likely helped the development of the periodic table?
O Scientists changed the atomic masses to better fit the pattern.
O Scientists refused to consider other ways to organize the elements.
O New technology was developed that modified the masses.
O New information changed the understanding of the atom's structure.
ANSWER ASAP
Answers
Elena held a rock weighing 1 N in her hand. The rock has no velocity.
KE________?
Answers
KE = 0
Further explanationEnergy is the ability to do work
Energy because its motion is expressed as Kinetic energy (KE) which can be formulated as:
[tex]\large{\boxed{\bold{KE=\frac{1}{2}mv^2}}}[/tex]
So for two objects that have the same speed, the greater the mass of the object, the greater the kinetic energy
The stone in hand is in a motionless state (at rest) so that its velocity (v) = 0, so it has no kinetic energy
But this stone can have potential energy that is gained due to its height
Line M passes through the points (-5, 9) and (-1,9).
12
10-
8
6
2
-12-10-8-6-4-22
2
6 8 10 12 X
6
-10
-12-
Which is true of line M?
Answers
Answer:
line m is vertical line with an undefined slopel line correct answer is 6 8 10 12 x
hello nice ppl(ɔ◔‿◔)ɔ ♥
Answers
Answer:
Hi
Explanation:
How has your brainly experience been so far? Are you liking?
Answer:
Thx you are sooo noice
Explanation:
UwU U3U
NEEEDDDD HELP ASAP PLZ PLZ PLZ PLZ PLZ HELP ME
Answers
Answer:
[tex]ns^2[/tex]
Explanation:
example of physical property
Answers
Answer:
Color. I thinkkk.
Phyiscal properties are defined as properties that can be measured or observed without changing the chemical nature of the substance.
Some examples of phsyical properties are:
- Color
- Density
- Volume
- Mass
- Boiling or Melting Points
Which is the best way to determine if an object is made of pure silver?
O Determine the solubility of the object.
O Test to see if the object is chemically reactive.
Determine the density of the object and compare the known density of pure silver.
O Compare the mass of the silver object to the mass of a piece of pure silver.
Answers
Answer:
The correct option is;
Determine the density of the object and compare the known density of pure Silver
Explanation:
The density of the object is found by finding the weight of the object, and then finding the volume (of water) the object displaces when it is immersed (in water)
The density is then fond by dividing the weighed mass by the volume the object displaces when immersed
Compare the result of the measured density with that of pure silver. If the two have density, as well as other similar physical characteristics, then the object is likely to be pure silver.
How much heat is required to melt 42.0 grams of water at 0*C?
Hurry...
Answers
Answer:
Heat required to melt 42 g if ice is 13,860 J
Explanation:
The amount of heat required to melt grams of water at 0°C is given as follows;
The mass of the ice (water), m = 42 g
The latent heat of fusion of ice Δ[tex]H_f[/tex]= 330 J/g
Therefore, heat required to melt 42 grams is given as follows;
Heat required to melt ice = Mass of the ice, m × The specific latent heat of fusion of the ice, Δ[tex]H_f[/tex]
Heat required to melt 42 g if ice = m × Δ[tex]H_f[/tex] = 42 g × 330 J/g = 13,860 J
Heat required to melt 42 g if ice = 13,860 J.
Does changing the number of neutrons affect the atomic number?
Answers
Answer:
awsdxcvawsd
Explanation:
Answer:If you change the number of neutrons in an atom, you get an isotope of the same element. The addition of a neutron can make an atom radioactive. When you change the number of protons in an atom, you will change the atom from one element to a different element.
Explanation:
How is the nuclear structure of an atom similar to the non-nuclear structure?
Answers
Answer:
It has shells of protons and neutrons.
Explanation:
The nuclear structure of an atom is similar to the non-nuclear structure because has shells of protons and neutrons.
What is an atom?An atom consists of a central nucleus that is usually surrounded by one or more electrons.
The total number of neutrons plus protons in the same both before and after the nuclear process, although the total number of protons and the total number of neutrons may be different before and after.
Hence, the nuclear structure of an atom is similar to the non-nuclear structure because has shells of protons and neutrons.
Learn more about the atoms here:
https://brainly.com/question/1566330
#SPJ2
Quais são os três tipos de tecidos musculares? E)celulas,estriado esqueletico, estriado liso. B)esttiadi esqueletico, liso, estriado cardiaco c)estriado liso, estriado esqueletico, estriado cardíaco. D)liso, celulas, esteiado cardíaco. ESSA PERGUNTA E DE CIENCIAS MAS NAO TEM VIENCIAS ALI PRA ESCOLHER;-;.
Answers
Answer:
c)estriado liso, estriado esqueletico, estriado cardíac
Explanation:
Los 3 tipos de tejido muscular filho cardíaco, liso y esquelético.
O músculo esquelético é responsável pelo movimento dos tons e das outras estruturas. La contracción del músculo cardíaco permite que o corazón bombee sangre. Los músculos lisos permitem que os alimentos se muevan a través del tracto digestivo y también ayudan al cuerpo a absorvedor los nutrientes.