We are given:
Density of Olive oil = 0.92 g / mL
Mass of 20 mL Olive oil:
We know that the density = 0.92 grams / mL
multiplying the numerator and the denominator by 20
Density = 0.92 * 20 grams / 20 mL
Density = 18.4 grams / 20 mL
So, we have 18.5 grams in 20 mL of Olive oil
Volume of 20 grams Olive oil:
We need to multiply the numerator and the denominator of density by a number, that when multiplied by 0.92 will give 20
let that number be x:
0.92 * x = 20
x = 20/0.92
x = 21.74 (approx)
Multiplying the numerator and the denominator by x:
Density = 0.92 grams / 1 mL
Density = 0.092 * 21.74 / 21.74 mL
Density = 20 grams / 21.74 mL
So, we can see that 20 grams of the oil will have the volume 21.74 mL
CALCULATION OF DENSITY:
The density of a substance can be calculated by dividing the mass by its volume. That is;Density = mass (g) ÷ volume (mL)
The density of olive oil is given as: 0.92g/mL
QUESTION 1:
Hence, the mass of 20mL (volume) olive oil is calculated as follows:Mass = density × volume
Mass = 0.92g/mL × 20
Mass of olive oil = 18.4grams.
QUESTION 2:
The volume of 20g (mass) of olive oil is calculated as follows:Volume = mass ÷ density
Volume = 20 ÷ 0.92
Volume of olive oil = 21.74mL
Therefore;
The mass of 20mL of olive oil is 18.4gThe volume of 20g of olive oil is 21.74mLLearn more: https://brainly.com/question/2040396?referrer=searchResults
Which temperature is warmest
A. 0°C
B. 273 K
C. 32°F
D. 30°C
Answer:
your answer should be B.273 K
Explanation:
Order the relative rate of diffusion of the following gases from slowest to fastest
Answer:
Kr, Ar, Ne, N
Explanation:
Hope this helps
What volume. In liters, of H2O(g) measured at STP is produced by the combustion of 15.63 g of natural gas (CH4) according to the following equation? CHale) +20269) CO2 + 2H2008)
Answer:
V = 43.95 L
Explanation:
Given data:
Mass of CH₄ decomposed = 15.63 g
Volume of H₂O produced at STP = ?
Solution:
Chemical equation:
CH₄ + 2O₂ → 2H₂O + CO₂
Number of moles of CH₄:
Number of moles = mass/molar mass
Number of moles = 15.63 g/ 16 g/mol
Number of moles = 0.98 mol
Now we will compare the moles of H₂O with CH₄.
CH₄ : H₂O
1 : 2
0.98 : 2×0.98 = 1.96 mol
Volume of hydrogen:
PV = nRT
1 atm × V = 1.96 mol × 0.0821 atm.L/mol.K × 273.15 K
V = 43.95atm.L / 1atm
V = 43.95 L
Can you solve this
In metallic bonds, the mobile electrons surrounding the positive ions are called a(n)
formal charge of hcooh
Answer:
What is the question?
Which of the following pairs of elements is least likely to combine to form a compound?
A. Aluminum AI and phosphorus P
B. boron B and neon S
C. carbon C and sulfur S
D. oxygen and fluorine F
Answer:
c.carbon C and sulfur S
Explanation:
What is the density of a glass piece that has mass of 18 g and a volume of 24 mL?
Answer:
The answer is 0.75 g/mLExplanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\ [/tex]
From the question we have
[tex]density = \frac{18}{24} = \frac{3}{4} \\ [/tex]
We have the final answer as
0.75 g/mLHope this helps you
1. What kind of mixture is formed when larger particles settle out when
left undisturbed?
A. colloid B. suspension C. solution
D. solvent
LA
Answer:
B. Suspension
Explanation:
A suspension is an heterogenous mixture in which the large particles settle out when not disturbed, thus ,can easily be separated by filtration.
An example is a mixture of sand and water. When left for a while the sand particles are clearly visible at the bottom of the container if its transparent.
what's the molar mass of alumina, AI2O3? the atomic weight of alumina is 26.98 and the atomic weight of oxygen is 16.00
Answer:
the answer is 101.96 g/mo
Explanation:
Answer:
101.96f/mal
Explanation:
PLEASE HELP!! Circuit A consist of two wires and a battery. Circuit B consist of the same strength battery and the same type of wires, but it also contains a light bulb. Which circuit has more resistance?
Answer:
light bulb B
Explanation:
more resistance
Is this right I will give brainiest
Answer:
Yes, you are correct.
Explanation:
I used Google.
A 7.28 g sample of chromium metal was heated to produce chromium oxide. The weight of the compound was 10.63 g. What is the percent chromium in this compound?
Answer:
68.48%
Explanation:
The percent mass of an element in a compound tells us about the amount of such element contributed to the total compound.
In this case, 7.28 g sample of chromium metal was heated to produce chromium oxide with weight of 10.63 g. The percent mass of chromium in chromium oxide can be calculated by using the formula:
%mass of Cr = mass of Cr/mass of Chromium oxide × 100%
%mass of Cr = 7.28/10.63 × 100
%mass of Cr = 0.6848 × 100
%mass of Cr = 68.48%
Calculate the frequency of a wave with a wavelength of 5.62 x 1010 m. (first convert m to nm)
Answer:
f = 0.534×10⁻² Hz
Explanation:
Given data:
Frequency of wave= ?
Wavelength of wave = 5.62×10¹⁰ m
Solution:
Formula:
Speed of wave = wavelength × frequency
Speed of wave = 3×10¹⁷ nm/s
λ = 5.62×10¹⁰m×10⁹ nm/1 m = 5.62×10¹⁹ nm
Now we will put the values in formula.
3×10¹⁷ nm/s = 5.62×10¹⁹ nm × f
f = 3×10¹⁷ nm/s / 5.62×10¹⁹ nm
f = 0.534×10⁻² s⁻¹ or
f = 0.534×10⁻² Hz
What type of bond would be expected between Mg and Ti?
A.hydrogen bond
Bionic bond
C.covalent bond
D.metallic bond
Why do gases diffuse more quickly than liquids?
Choose the correct answer.
A) Liquids can be compressed easily.
B)The particles in gases are not mobile.
C)Liquids are always at lower temperatures than gases.
D)Gas particles move rapidly and have space between them.
Answer:
D)Gas particles move rapidly and have space between them.
Explanation:
Matter exists in three states namely: solids, liquids and gases. The particles contained in these three states are different from one another. In the gaseous state, the particles are FAR APART from one another i.e. space exists and they move at a very fast rate in contrast to the particles of a liquid, which have less space and move slower.
This rapid movement of gas particles within a less restricted space accounts for the reason why gaseous substances DIFFUSE more quickly than liquids.
Analysis of the water content of a lake found in the desert showed that it contained 17.5 percent chloride ion, and has a density of 1.23 g/mL. What is the molarity of the chloride ion in the water
Answer:
The molarity is 6.0 M.
Explanation:
The concentration of a solution is the amount of solute present in a given amount of solvent, or a given amount of solution.
In this problem, we are asked to convert percent by mass to molarity, which are two different concentration units.
The percent by mass is the ratio of the mass of a solute to the mass of the solution, multiplied by 100 percent. On the other hand, molarity (M) is defined as the number of moles of solute per liter of solution.
If we have 17.15 percent chloride ion, that means that we have 17.15 grams of chloride ion in 100 grams of solution. The density provided is the density of the solution, so we calculate how many mL correspond to 100 grams of solution:
1.23 g ----------- 1 mL
100 g ------------ x= 81.3 mL
Therefore, 17.5 grams of chloride ion are contained in 81.3 mL. Now we need to convert these grams into moles.
The atomic mass of chlorine is 35.5 g/mol:
35.5 g --------------- 1 mol
17.5 g --------------- x= 0. 49 mol
This 0.49 moles are contained in 81.13 mL, the definition of molarity says that this moles are contained in a liter (or what is the same, 1000 mL):
81.3 mL --------------- 0.49 mol
1000 mL ------------- x= 6.0 M
The molarity of the chloride ion will be 6.0 M.
НО-ОН
what is the reaction to show the bond cleavage
Answer:
Fast and slow free-radical recombination reactions in thermal breakdown. As thermally induced bond-cleavage reactions and the depolymerisation of coals accelerate above 350–375°C, the more reactive of the free radicals have greater potential to undergo either retrogressive or quenching (cappin
Explanation:
Calculate the molarity of 32.9 g32.9 g of MgS MgS in 971 mL 971 mL of solution.
Answer:
0.60 M
Explanation:
Given data:
Mass of MgS = 32.9 g
Volume of solution = 971 mL (0.971 L)
Solution:
Molarity is used to describe the concentration of solution. It tells how many moles are dissolve in per litter of solution.
Formula:
Molarity = number of moles of solute / L of solution
Number of moles of MgS:
Number of moles = mass/molar mass
Number of moles = 32.9 g/ 56.38 g/mol
Number of moles = 0.58 mol
Molarity of solution:
M = 0.58 mol/ 0.971L
M = 0.60 M
Which of the following conclusions about the two intermolecular forces is correct? X represents London dispersion forces, and Y represents ion-dipole forces. X represents dipole-dipole forces, and Y represents ion-dipole forces. X represents hydrogen bonding, and Y represents dipole-dipole forces. X represents London dispersion forces, and Y represents dipole-dipole forces.
Answer:
X represents London dispersion forces, and Y represents dipole-dipole forces.
Explanation:
which stimulate causes high energy emotional elation dehydration and damage serotonin producing neurons
Answer:
ecstasy
Explanation:
7th grade help me plzzzz
Answer:
B & A
Explanation:
A Compound consists of two or more atoms from different elements, that are chemically bound together.
A electron carries a negative charge, because it is found in the electron cloud
If your wondering too, A proton carries A Positive charge.
Answer:
2 or more atoms from different elements that are chemically bonded together.
negative charge.
A mystery element "X” has two stable isotopes X-50 which occurs 40% of the time
and X-60 which occurs 60% of the time. What is the average mass of element "X"?
A-50 amu
B-54 amu
C-56 amu
D-60 amu
Answer:
probaly C
Explanation:
I'm not sure on this one...
What is the specific rotation of a sample of carvone that is an equal mixture of the R and S enantiomers
Answer:
Zero
Explanation:
An an equal mixture of the R and S enantiomers of carvone is called a racemic mixture.
In a racemic mixture, the R enantiomer rotates plane polarized light in one direction while the S enantiomer rotates plane polarized light in another direction.
This cancels out the rotation due to each enantiomer since they are equal in magnitude but opposite in direction leading to a specific rotation of zero for the racemic mixture.
PLEASE HELPPPP
I WILL MARK 1st ONE BRAINLIEST
Answer:
the first one(atoms only give off certain frequencies)
Explanation:
A scientist is considering formaldehyde (HCHO) for use in an experiment. She is studying the strength of triple bonds in molecules. Is
ormaldehyde a good choice for her to use? Why?
A. Yes, HCHO has three triple bonds.
B. Yes, HCHO has one triple bond.
C. No, HCHO has a double bond but no triple bonds.
D. No, HCHO has only single bonds.
The atomic masses of 20Ne (90.48 percent), 21Ne (0.27 percent), and 22Ne (9.25 percent) are 19.9924356, 20.9938428, and 21.9913831 amu, respectively. Calculate the average atomic mass of neon. The percentages in parentheses denote the relative abundance
Answer:
20.180042 amu
Explanation:
From the question given above, the following data were obtained:
Isotope A (20Ne)
Mass of A = 19.9924356 amu
Abundance (A%) = 90.48%
Isotope B (21Ne):
Mass of B = 20.9938428 amu
Abundance (B%) = 0.27%
Isotope C (22Ne):
Mass of C = 21.9913831 amu
Abundance (C%) = 9.25%
Average atomic mass of Neon =.?
The average atomic mass of Neon can be obtained as follow:
Average atomic mass = [(mass of A × A%)/100] + [(mass of B × B%)/100] + [(mass of C × C%)/100]
= [(19.9924356 × 90.48)/100] + [(20.9938428 × 0.27) /100] + [(21.9913831 × 9.25) /100]
= 18.0891557 + 0.05668338 + 2.03420294
= 20.180042 amu
Therefore, the average atomic mass of Neon is 20.180042 amu
How many moles of H2SO4 are required to completely react with 7.20 mol of Al according to the balanced chemical reaction: 2Al(s) +3H2SO4(aq) → Al2(SO4)3(aq) +3H2(g)
10.8
7.2mol*3/2=10.8mol.
10.8 moles of H₂SO₄ is required for the reaction.
The balanced equation for the reaction is given below:
2Al + 3H₂SO₄ —> Al₂(SO₄)₃ + 3H₂From the balanced equation above,
2 moles of Al required 3 moles of H₂SO₄.
Finally, we shall determine the number of mole of H₂SO₄ required to react with 7.20 moles of Al.
This can be obtained as follow:
From the balanced equation above,
2 moles of Al required 3 moles of H₂SO₄.
Therefore,
7.20 moles of Al will require = [tex]\frac{7.2 X 3}{2} \\\\[/tex] = 10.8 moles of H₂SO₄
Thus, 10.8 moles of H₂SO₄ is required for the reaction.
Learn more: https://brainly.com/question/18474161
At which temperature can water contain the most
dissolved sugar?
Answer:
At 10ºC or 50ºF water can cotain the most dissolved sugar.
Explain the humoral theory
Answer:
The medical philosophy of the ancient Greeks in which the state of health and disease was determined by the four body “humours”—blood, yellow and black bile, and phlegm—and their relationships with the four elemental humours—air, fire, earth and water. Segen's Medical Dictionary.
Explanation: