6. functions of the fedwhich of the following are functions of the federal reserve system? check all that apply

By default, storage reports are saved on the computer's local hard drive. The exact location may vary depending on the operating system and the version of the software being used.

In Windows operating systems, storage reports are typically saved in the "Documents" or "Downloads" folder. In macOS, storage reports can be found in the "Downloads" or "Documents" folder as well. It is important to note that the location of storage reports can be changed by the user to a different location if desired. This can be done by adjusting the settings within the software or by manually moving the report to a different location on the computer.

To learn more about default click here: brainly.com/question/31761368

#SPJ11

Converting ideas into words or gestures to convey meaning is called communication.

Communication is the process of sharing information, thoughts, or ideas with others, and it is an essential aspect of human interaction. Communication can take many forms, including verbal, nonverbal, written, and visual.

Verbal communication involves speaking and listening, while nonverbal communication involves body language, facial expressions, and tone of voice.

Written communication involves using written words to convey information, while visual communication involves using images, charts, or graphs to convey information.

Effective communication is essential for building relationships, resolving conflicts, and achieving common goals. It requires good listening skills, clear expression, and the ability to adapt to different communication styles and situations.

Successful communication involves transmitting messages that are understood by the receiver in the way the sender intended, and it requires careful consideration of the context and audience.

Learn more about communication here:brainly.com/question/12349431

#SPJ11

Infrastructure refers to the underlying systems and structures that support the functioning of a society, organization, or network.

In the context of information technology, infrastructure includes the physical and virtual resources that enable communication, data storage, and processing capabilities. Some key components of IT infrastructure are servers, routers, switches, data centers, and network connections.
When performing infrastructure reconnaissance, your task is to gather information about these specific areas to assess the security and efficiency of the systems in place. This can include evaluating network configurations, identifying vulnerabilities in hardware or software, and analyzing data traffic patterns. The purpose of infrastructure reconnaissance is to enhance overall network security and performance, ensuring the protection and integrity of data and systems.

To know more about structure visit:

https://brainly.com/question/30000720

#SPJ11

The implementation technologies include 400GBASE-SR16, 400GBASE-DR4, 400GBASE-FR8, and 400GBASE-LR8.The correct answer is e. All the above technologies are part of the IEEE 802.3bs standard.

The IEEE 802.3bs standard encompasses both 200 Gigabit Ethernet and 400 Gigabit Ethernet technologies. The implementation technologies associated with this standard include:

a. 400GBASE-SR16: This technology supports short-range transmission using multimode fiber, with 16 optical lanes.

b. 400GBASE-DR4: This technology enables 400 Gbps transmission over four lanes of single-mode fiber for short-reach applications.

c. 400GBASE-FR8: This technology allows for 400 Gbps transmission over single-mode fiber using eight optical lanes for longer distances.

d. 400GBASE-LR8: This technology supports 400 Gbps transmission over single-mode fiber using eight optical lanes for even longer distances.

Therefore, the correct answer is e. All the above technologies are part of the IEEE 802.3bs standard.

Learn more about implementation technologies

brainly.com/question/26676205

#SPJ11

Here's a Python implementation of a function that checks whether a singly linked list of characters is a palindrome:

class ListNode:

   def __init__(self, val=0, next=None):

       self.val = val

       self.next = next

def isPalindrome(head):

   # Base case: If the list is empty or has only one node, it is a palindrome

   if not head or not head.next:

       return True

   # Find the middle of the linked list

   slow = fast = head

   while fast and fast.next:

       slow = slow.next

       fast = fast.next.next

   # Reverse the second half of the linked list

   prev = None

   curr = slow

   while curr:

       next_node = curr.next

       curr.next = prev

       prev = curr

       curr = next_node

   # Compare the first half with the reversed second half

   first_half = head

   second_half = prev

   while second_half:

       if first_half.val != second_half.val:

           return False

       first_half = first_half.next

       second_half = second_half.next

   return True

You can use this function to check if a given linked list is a palindrome by passing the head of the linked list to the is Palindrome function. It will return True if the list is a palindrome, and False otherwise.

Learn more about palindrome  here:

https://brainly.com/question/13556227

#SPJ11

The given statement "Most daemon scripts accept the arguments start, stop, and restart" is true. These arguments allow users to manage the daemon's life cycle easily.

Most daemon scripts, which are used to manage background processes or services in a Unix or Unix-like operating system, often accept the arguments "start," "stop," and "restart." The "start" argument launches the daemon process, "stop" terminates it, and "restart" stops and then starts the daemon again, effectively reloading its configuration.

This is a common convention for daemon scripts to provide a consistent and straightforward way to manage services on a system. By accepting these standard arguments, daemon scripts allow for consistent control and management of services across different systems.

Learn more about Unix visit:

https://brainly.com/question/32072511

#SPJ11

True. The remove(self, value: object) -> bool method in a tree data structure is used to remove a specific value from the tree.

It returns a boolean value indicating whether the removal was successful or not. When the remove() method is called, it searches for the given value in the tree. If the value is found, it is removed from the tree, and the method returns True to indicate a successful removal. If the value is not present in the tree, nothing is changed, and the method returns False to indicate that the removal was unsuccessful.

The remove() method typically follows specific rules and algorithms based on the type of tree, such as binary search tree or AVL tree, to maintain the tree's structure and properties.

Learn more about tree data structures here:

https://brainly.com/question/31327097

#SPJ11

The Excel function =800*RAND() generates random numbers between 0 and 800 with a uniform distribution. For a uniform distribution, the standard deviation can be calculated using the formula:

Standard Deviation = (Range / sqrt(12))

In this case, the range is 800 - 0 = 800. Therefore, the standard deviation is:

Standard Deviation = (800 / sqrt(12)) ≈ 230.94

Excel is a popular spreadsheet software developed by Microsoft. It provides a powerful set of tools for creating, organizing, analyzing, and presenting data in tabular form. Excel is widely used in various industries and fields for tasks such as data entry, calculation, data analysis, and reporting.

Excel is widely used for various purposes, including financial analysis, budgeting, project management, data tracking, inventory management, and reporting. Its versatility, ease of use, and broad range of features make it a powerful tool for individuals, businesses, and organizations to work with and analyze data efficiently.

Visit here to learn more about Excel brainly.com/question/3441128

#SPJ11

The statement "all crm packages contain modules for prm and erm" is False. While some CRM packages may include modules for PRM and ERM, not all CRM packages necessarily contain these modules. It ultimately depends on the specific CRM package and its features.

CRM (Customer Relationship Management) packages typically focus on managing customer relationships, sales processes, marketing campaigns, and customer service. They provide functionality to store customer data, track interactions, manage leads, and facilitate customer engagement.

However, the inclusion of PRM and ERM modules can vary depending on the specific CRM package and its features.

PRM (Partner Relationship Management) modules are designed to manage relationships with partners, such as resellers, distributors, or suppliers. They enable organizations to track partner interactions, manage partner portals, collaborate on joint marketing efforts, and monitor partner performance.

ERM(Enterprise Relationship Management)  modules, on the other hand, focus on employee relationship management. They help organizations track employee data, manage employee profiles, facilitate communication and collaboration within the organization, and support HR-related functions such as performance management and training.

So the statement is False.

To learn more about CRM: https://brainly.com/question/23823339

#SPJ11

In the AFN (Additional Funds Needed) equation, the key factors that indicate the need for external financing are:

Projected Sales Growth: The expected increase in sales volume over a given period affects the financing requirements. Higher sales growth may require additional funds to support increased production, inventory, and accounts receivable.

Asset Intensity: The asset intensity refers to the amount of assets required to support a given level of sales. If the asset intensity ratio is high, it indicates a greater need for external financing to acquire the necessary assets.

Profit Margin: The profit margin represents the percentage of each sales dollar that translates into net income. A low profit margin reduces the internal generation of funds and may require external financing to meet investment requirements.

Dividend Policy: The dividend policy of a company affects the retention of earnings, which is an internal source of financing. A higher dividend payout ratio reduces the availability of internal funds, potentially necessitating external financing.

Accounts Payable and Accounts Receivable Policy: The management of accounts payable and accounts receivable affects the cash cycle and working capital requirements. If the payment period for accounts payable is shorter than the collection period for accounts receivable, it may result in a need for external financing.

Learn more about AFN equation here:

https://brainly.com/question/23612805

#SPJ11

A computer program is a detailed set of instructions that tell a computer what to do with different types of objects.

Thus, The remainder of this book will be devoted to developing and honing our grasp of the precise range of capabilities of a computer.

Understanding these concepts thoroughly will be crucial to your ability to program a computer effectively because it will enable you to explain your goals in a language that the machine can understand.

However, before we do that, we must discuss the materials that support computer operation.

On data, computer programs run. Although a single piece of data can be referred to as a datum, we'll use the word value instead.

Thus, A computer program is a detailed set of instructions that tell a computer what to do with different types of objects.

Learn more about Computer program, refer to the link:

https://brainly.com/question/14588541

#SPJ1

the average vertex degree of T is exactly 1.99, there is no valid number of vertices |V(T)| that satisfies this condition.

To find the number of vertices |V(T)| in the tree T, given that its average vertex degree is 1.99, we can use the fact that the sum of the degrees of all vertices in a tree is twice the number of edges.

Let's assume that T has n vertices and m edges. The average vertex degree is calculated by summing up the degrees of all vertices and dividing it by the number of vertices. Since the average vertex degree is given as 1.99, we have the equation:

(2m) / n = 1.99

We can rearrange this equation to solve for n:

2m = 1.99n

m = (1.99n) / 2

We know that the sum of the degrees of all vertices in a tree is equal to twice the number of edges, so we have:

Sum of degrees = 2m = 2 * (1.99n) / 2 = 1.99n

Since the average vertex degree is 1.99, the sum of degrees is also equal to 1.99n. Now, let's analyze the sum of degrees. Each vertex contributes to the sum of degrees by its degree, and in a tree, the degree of each vertex is at least 1.

Since the average vertex degree is less than 2, the degree of each vertex must be either 1 or 2. It is not possible to have a vertex with a degree higher than 2 because the average degree would then exceed 1.99.

Considering the two possible degrees, let's count the number of vertices for each case:

1. If all vertices have a degree of 1, the sum of degrees would be n * 1 = n.

2. If some vertices have a degree of 2 and the rest have a degree of 1, the sum of degrees would be 2k + (n - k), where k is the number of vertices with degree 2.

Since the sum of degrees is equal to 1.99n, we have two cases to consider:

Case 1: Sum of degrees = n = 1.99n

Solving this equation, we find n = 0, which is not a valid number of vertices for a tree.

Case 2: Sum of degrees = 2k + (n - k) = 1.99n

Simplifying the equation, we get 2k - 0.99n = 0.99k.

We can rewrite this as k = (0.99n) / 1.01.

In this case, k is the number of vertices with a degree of 2. Since k and n are both positive integers, k must be a multiple of 1.01. However, since k represents the number of vertices and cannot be a fraction, there is no valid solution for this case either. Therefore, based on the given information that the average vertex degree of T is exactly 1.99, there is no valid number of vertices |V(T)| that satisfies this condition.

learn more about tree here:

https://brainly.com/question/4337235

#SPJ11

The automatic identification of material is facilitated by techniques such as machine learning, computer vision, spectroscopy, sensors, barcode/RFID systems, and data analysis to classify and recognize materials based on their characteristics and properties.

The automatic identification of materials involves employing various technologies and techniques to classify and recognize different types of materials. Machine learning algorithms can be trained on labelled data to identify patterns and characteristics specific to each material. Computer vision methods utilize image processing and pattern recognition to analyze visual cues and distinguish materials based on their visual appearance. Spectroscopy techniques measure the interaction of materials with light to determine their chemical composition. Sensors, such as RFID or barcode systems, provide unique identifiers for materials, enabling automated tracking and identification. Data analysis algorithms can process collected data and match it against known material profiles. Together, these approaches facilitate the automatic identification of materials in various applications, including manufacturing, inventory management, and quality control.

Learn more about  automatic identification here:

https://brainly.com/question/32272612

#SPJ11

The numbers would be printed in the order 8, 7, 6, 5, 4 during a post-order traversal of the AVL tree.

When inserting the numbers 4, 5, 6, 7, and 8 into an AVL tree in that order and traversing the tree using a post-order traversal, the numbers would be printed in the order of visiting the nodes. In a post-order traversal, the left subtree is traversed first, followed by the right subtree, and finally the current node.

In this case, the AVL tree would be constructed as follows: 4 as the root, with 5 as the right child, and 6 as the right child of 5. Then, 7 becomes the left child of 6, and finally, 8 becomes the right child of 7.

During the post-order traversal, the numbers would be printed in the order: 8, 7, 6, 5, 4, reflecting the order in which the nodes are visited, starting from the leftmost leaf, moving up to the root, and then visiting the right subtree.

Learn more about numbers

brainly.com/question/24908711

#SPJ11

the cutoff frequency of the photoelectric effect for the given metal with a work function of 2.4 eV is approximately 4.135667696 × [tex]10^(-15[/tex])eV·s).[tex]4.135667696 × 10^(-15) eV·s).[/tex] Hz.

The cutoff frequency of the photoelectric effect can be determined using the equation:

f_cutoff = (work function) / h

where:

f_cutoff is the cutoff frequency,

work function is the energy required to remove an electron from the metal (given as 2.4 eV), and

h is Planck's constant (approximately [tex]4.135667696 × 10^(-15) eV·s).[/tex]

Let's calculate the cutoff frequency using these values:

f_cutoff =[tex]2.4 eV / (4.135667696 × 10^(-15) eV·s)[/tex]

f_cutoff ≈ [tex]5.8 × 10^14 Hz[/tex]

Therefore, the cutoff frequency of the photoelectric effect for the given metal with a work function of 2.4 eV is approximately 4.135667696 × [tex]10^(-15[/tex])eV·s).[tex]4.135667696 × 10^(-15) eV·s).[/tex] Hz.

Learn more about photoelectric effect

brainly.com/question/30092933

#SPJ11

To add solid fill red data bars in Excel, follow these steps:

1. Open Excel and navigate to the worksheet where you want to add the data bars.

2. Select the range of cells that you want to apply the data bars to.

3. Go to the "Home" tab in the Excel ribbon.

4. Locate the "Conditional Formatting" option and click on the drop-down arrow next to it.

5. From the options that appear, select "Data Bars" and then choose "More Rules" at the bottom.

6. In the "Edit Formatting Rule" dialog box, select "Solid fill" from the "Type" drop-down menu.

7. Choose the desired red color for the fill and adjust any other formatting options as needed.

8. Click "OK" to apply the red data bars to the selected range of cells.

The selected cells will now display solid fill red data bars based on their values, providing a visual representation of the data.

To learn more about Data - brainly.com/question/29117029

#SPJ11

The time complexity of the shortest path algorithm on a graph with n vertices can be bounded by option B: O(n^2).

Explanation: The time complexity of the shortest path algorithm depends on the specific algorithm used. However, many commonly used algorithms for finding the shortest path, such as Dijkstra's algorithm and the Floyd-Warshall algorithm, have a time complexity of O(n^2), where n represents the number of vertices in the graph. These algorithms typically involve iterating through each vertex and examining its adjacent vertices, resulting in a time complexity proportional to the square of the number of vertices.

Option A (O(n^3)) and option C (O(n^2logn)) are not accurate representations of the time complexity of the shortest path algorithm on a graph. Option A suggests a cubic time complexity, which is not typically observed in efficient shortest path algorithms. Option C suggests a time complexity involving logarithmic terms, which is not commonly associated with shortest path algorithms either.

In summary, the time complexity of the shortest path algorithm on a graph with n vertices is commonly bounded by O(n^2), indicating a quadratic relationship between the input size and the time required to find the shortest path.

Learn more about algorithm here:

brainly.com/question/29412375

#SPJ11

Web crawlers or web spiders are small computer programs designed to perform automated,

repetitive tasks of collecting and archiving web pages over the internet.

Web crawlers, also known as web spiders or web robots, are software applications that systematically browse the internet, following hyperlinks from one web page to another. Their main purpose is to collect and index information from websites for search engines, such as G o o g l e or Bing.

These crawlers operate by sending HTTP requests to web servers and parsing the HTML content of web pages to extract relevant data. They typically follow the links found on a web page, recursively visiting new pages and building a comprehensive index of the web.

Web crawlers play a crucial role in maintaining search engine databases and enabling efficient web searches. They help search engines discover and index new content, update existing pages, and gather information about website structure and relationships.

To know more about websites click here

brainly.com/question/29330762

#SPJ11

The type of attack you are referring to is called a "Known-plaintext attack."

In this type of attack, the attacker has access to both the encrypted (ciphertext) and decrypted (plaintext) forms of the messages. Using this information, the attacker's goal is to determine the encryption key or decryption algorithm being used. This can potentially compromise the security of the entire cryptosystem. The attacker may then use this knowledge to decrypt other ciphertexts encrypted with the same key or algorithm, without requiring any further plaintext-ciphertext pairs. Known-plaintext attacks are less common in modern cryptography, as more secure encryption algorithms and methods have been developed to counter such attacks.

To know more about Known-plaintext attacks visit:

https://brainly.com/question/31824190

#SPJ11

When making a radio report, pertinent facts are relevant, ensuring that only the necessary and essential details are included in the report.

When creating a radio report, the relevant details that should be included are pertinent facts. This means including only the necessary and essential information that is directly related to the report's purpose and objective. Pertinent facts typically encompass key details that are important for the audience to understand the subject or incident being reported.

Including diagnostic criteria, as mentioned in option A, may not be necessary in a radio report unless the report specifically focuses on diagnosing a particular condition or issue. Option B, "any level of detail," may result in information overload and could lead to confusion or loss of clarity in the report. Option D, "only the ETA" (Estimated Time of Arrival), is too specific and may not provide a comprehensive understanding of the topic being reported.

By focusing on pertinent facts, radio reports can provide concise and clear information to the audience, enabling them to quickly grasp the essential details of the report without unnecessary details or extraneous information. This approach ensures that the report is efficient, effective, and conveys the necessary information to the listeners in a clear and concise manner.

Learn more about ETA :brainly.com/question/1154915

#SPJ4

In Java, a private variable is not directly accessible from another class. However, you can provide public accessor methods, also known as getters and setters, in the class that contains the private variable to allow other classes to read or modify its value.

To access a private variable from another class, you can call the public getter method of the class that contains the private variable. This method returns the value of the private variable, allowing you to access it from another class. Similarly, if you want to modify the private variable, you can call the public setter method of the class that contains the private variable and pass the new value as an argument.

Learn more about Java here: brainly.com/question/13014116

#SPJ11

A thread is generally more efficient than a process for the following two activities.

Thread creation: Creating a new thread within a process is generally more efficient than creating a new process. This is because creating a new process requires duplicating the parent process's entire address space, whereas creating a new thread only requires duplicating the minimal state necessary for the new thread.

Thread termination: Terminating a thread within a process is generally more efficient than terminating a process. This is because terminating a process requires cleaning up all the resources associated with the process, whereas terminating a thread only requires cleaning up the minimal state associated with the thread.

However, it is worth noting that the efficiency of threads versus processes can depend on the specific implementation and context in which they are used. In some cases, creating a new process may be more efficient than creating a new thread, such as when the new process can take advantage of a new CPU core. Additionally, the efficiency of file open and write calls and system calls can also depend on the specific implementation and context.

Visit here to learn more about Thread creation:

brainly.com/question/30929467

#SPJ11

If you are using a new application or web based service you must first have it vetted by Contacting the Vendor (Option C)

Web services are a sort of internet software that uses defined communications protocols and is made accessible for usage by a client or other web-based applications through an application service provider's web server.

There are two types of web services Simple Object Access Protocol (SOAP) and Representational State Transfer (REST). SOAP is a specification for a common communication protocol (a set of rules) for XML-based message exchange.

SOAP employs a variety of transport protocols, including HTTP and SMTP.

Learn more about  web based service at:

https://brainly.com/question/31753691

#SPJ1

Full Question:

If you are using a new application or web-based service, you

must first have it vetted by:

a) Contacting your service line

O ) Contacting Procurement

(C) c) Contacting the Vendor

d) No need to do anything, because you believe it is secure

The operating system uses a process called "authentication" to confirm your logon information.

When you enter your username and password, the system checks them against a database of authorized users. If the credentials match, you're granted access to the computer.

This process helps ensure that only authorized individuals can access the system, providing a layer of security. To maintain strong security, it's essential to use unique, complex passwords and update them periodically.

Additionally, consider enabling multi-factor authentication (MFA) for enhanced protection. By controlling access rights, you can manage user permissions and limit the potential for unauthorized access.

Learn more about database at https://brainly.com/question/14915487

#SPJ11

To convert the given relation into the third normal form (3NF), we decompose it into two separate relations.

The first relation, PART, includes attributes PartNum, SupplierNum, and LeadTime. The composite primary key comprises PartNum and SupplierNum, with LeadTime being dependent on the key.

The second relation, SUPPLIER, includes attributes SupplierNum and SupplierName, with SupplierNum as the primary key and SupplierName dependent on the key.

By removing the transitive dependency of SupplierName on SupplierNum, we achieve the 3NF. The decomposed relations ensure data integrity, minimize redundancy, and support efficient querying and updating of information.

Read more about database here:

https://brainly.com/question/518894

#SPJ1

The answer is C) tabs, groups, and previews.

The Ribbon is a graphical user interface element used in Microsoft Office programs to organize commands and functions into tabs and groups. Each tab on the Ribbon represents a different activity area, such as Home or Insert. Within each tab, there are several groups of related commands. Users can select a group to view a set of commands and then click on a command to execute it. In addition to tabs and groups, the Ribbon also includes previews, which provide a live preview of the effect of a command before it is applied. Overall, the Ribbon helps to simplify and streamline the user interface, making it easier for users to find and use the features they need.

To learn more about Microsoft Office click here: brainly.com/question/15131211

#SPJ11

The word that describes a mixture that cannot be purified by distillation is "azeotrope".

An azeotrope is a mixture of two or more liquids that has a constant boiling point and composition. This means that the mixture cannot be separated by distillation, which is a common method used to separate and purify liquids based on their boiling points. In an azeotropic mixture, the vapor that is produced during boiling has the same composition as the liquid mixture, making it impossible to separate the components by distillation alone. However, other separation techniques such as chemical or physical methods can be used to separate the components of an azeotropic mixture.

Learn more about "azeotrope" here: brainly.com/question/30736140

#SPJ11

The 1's complement of 00010000 is 11101111. To get the 1's complement, we simply flip all the bits from 0 to 1 and from 1 to 0.

The 2's complement of 00010000 is 11101112. To get the 2's complement, we first take the 1's complement and then add 1 to the result. The 2's complement is used to represent negative numbers in binary form. It is calculated by subtracting the number from 2^n, where n is the number of bits used to represent the number.

For example, if we have 8 bits to represent a number, n = 8, and 2^n = 256. So to get the 2's complement of a number, we subtract it from 256.

Learn more about binary form here:

brainly.com/question/29549604

#SPJ11

SQL query to return SUPNR and number of products of each supplier who supplies more than five products:

2.  Nested SQL query to retrieve all purchase order numbers of purchase orders that contain either sparkling or red wine (product type):

SELECT PONR

FROM PURCHASE_ORDER

WHERE PONR IN (

SELECT PONR

FROM PO_LINE

JOIN PRODUCT ON PO_LINE.PRODNR = PRODUCT.PRODNR

WHERE PRODUCT.PRODTYPE = 'sparkling wine' OR PRODUCT.PRODTYPE = 'red wine'

3. SQL query with ALL or ANY to retrieve the name of the product with the highest available quantity:

SELECT PRODNAME

FROM PRODUCT

WHERE AVAILABLE_QUANTITY = ALL (

SELECT MAX(AVAILABLE_QUANTITY)

FROM PRODUCT

);

Note: If you want to use ANY instead of ALL, simply replace "ALL" with "ANY" in the query.

To know more about SQL query visit -

brainly.com/question/19801436

#SPJ4

To prove that if the functions y1 and y2 have a common point of inflection t0 in the interval I, they cannot be a fundamental set of solutions on I unless both p and q are zero, can use the Wronskian determinant.

Let's assume that y1 and y2 are solutions to the second-order linear homogeneous differential equation:

y'' + py' + qy = 0

The Wronskian determinant of y1 and y2 is given by:

W(t) = y1(t) * y2'(t) - y1'(t) * y2(t)

If y1 and y2 have a common point of inflection t0, it means that the second derivative of both functions changes sign at t0. This implies that either y1''(t0) and y2''(t0) have opposite signs or they are both zero. If y1''(t0) and y2''(t0) have opposite signs, it means that W(t0) ≠ 0. As the Wronskian determinant should be nonzero for a fundamental set of solutions. If y1''(t0) = y2''(t0) = 0, then both y1 and y2 are solutions to the homogeneous equation y'' = 0. Therefore, if y1 and y2 have a common point of inflection t0 in the interval I, they cannot be a fundamental set of solutions on I unless both p and q are zero.

Learn more about fundamental sets of solutions here

https://brainly.com/question/32291427

#SPJ11