3. State whether True or False
The level of significance can be viewed as the amount of risk that an analyst will accept while making a decision
Select one:
a. True
b. False
4. State whether True or False
One of the reasons that the data might not be linearly separable is because of the experimental errors that lead to errant data points.
Select one:
a. True
b. False

Answer: exact form-√10 decimal form- 3.16227766...

Step-by-step explanation:

Hope this helps.

The midpoint of the line segment is (-5/2, 5/2). To find the distance between two points on a coordinate plane, we use the distance formula:

d = √((x₂ - x₁)² + (y₂ - y₁)²)

Using this formula, we can find the distance between the points (-4,2) and (-1,3):

d = √((-1 - (-4))² + (3 - 2)²)
d = √(3² + 1²)
d = √10

Therefore, the distance between the two points is √10, which is approximately 3.16 units.

To find the midpoint of the line segment defined by these two points, we use the midpoint formula:

((x₁ + x₂)/2, (y₁ + y₂)/2)

Using this formula, we can find the midpoint of the line segment:

(((-4) + (-1))/2, (2 + 3)/2)
((-5/2), (5/2))

Therefore, the midpoint of the line segment is (-5/2, 5/2).

Learn more about distance ere:

brainly.com/question/12356021

#SPJ11

The probability that there is one or less theft in a minute is 0.09161 or 9.161%.

To find the probability that there is one or less theft in a minute, given that recent crime reports indicate that 4.0 motor vehicle thefts occur each minute in the USA, we can use the Poisson probability distribution formula.

The Poisson probability formula is:
P(x) = (e^(-λ) * λ^x) / x!

where λ (lambda) represents the average rate of occurrences (4.0 thefts per minute in this case), x is the number of occurrences we're interested in (0 or 1 theft), and e is the base of the natural logarithm (approximately 2.71828).

We want to find the probability of having 0 or 1 theft, so we'll calculate the probabilities for x=0 and x=1, and then add them together.

For x = 0:
P(0) = (e^(-4) * 4^0) / 0! = (0.01832 * 1) / 1 = 0.01832

For x = 1:
P(1) = (e^(-4) * 4^1) / 1! = (0.01832 * 4) / 1 = 0.07329

Now, we add the probabilities together:
P(0 or 1 theft) = P(0) + P(1) = 0.01832 + 0.07329 = 0.09161

So, the probability that there is one or less theft in a minute, given the Poisson distribution, is approximately 0.09161 or 9.161%.

Know more about probability here:

https://brainly.com/question/13604758

#SPJ11

Therefore, any equation of the form y = kx, where k is a constant, has the same constant of proportionality as the equation y = (1/3)x.

Proportionality, equivalence between two ratios in mathematics. A and B are in the same ratio as C and D in the formula a/b = c/d. When one of a proportion's four quantities is unknown, a proportion is often built up to resolve the word problem.  

According to the principle of proportionality, any incidental human casualties and property damage must not outweigh the tangible benefits to the military that may be expected from the destruction of a military objective.

The equation y = (1/3)x represents a proportional relationship between y and x with a constant of proportionality of 1/3.

Any equation of the form y = kx, where k is a constant, represents a proportional relationship between y and x with a constant of proportionality of k.

Learn more about proportionality visit: brainly.com/question/24868934

#SPJ4

P(y-x ≤ -1/2) = ∫∫f(x,y)dxdy where y-x ≤ -1/2

= ∫(y+1/2)∫y8xydxdy (since x lies between y+1/2 and 1)

= 1/64

Therefore, P(y-x ≤ -1/2) = 1/64.

a. The joint probability distribution function of X and Y can be obtained by integrating the joint probability density function over the region where 0 ≤ y ≤ x ≤ 1:

F(x,y) = ∫∫f(u,v)dudv

= ∫y∫x8uvdudv (since 0 ≤ y ≤ x ≤ 1)

= 4xy^2

b. To find the marginal density function of Y, we integrate the joint probability density function over all possible values of X:

fY(y) = ∫f(x,y)dx from 0 to y + ∫f(x,y)dx from y to 1

= ∫y^18xydx + ∫y^18yxdx

= 4y^3

c. To find the conditional density function of X given Y = 0.5, we use the formula:

f(x|y=0.5) = f(x,0.5)/fY(0.5)

f(x,0.5) is obtained by substituting y = 0.5 in the joint probability density function:

f(x,0.5) = 4x(0.5) = 2x

fY(0.5) is obtained by substituting y = 0.5 in the marginal density function of Y:

fY(0.5) = 4(0.5)^3 = 0.5

So, f(x|y=0.5) = 2x/0.5 = 4x

d. To find P(y-x ≤ -1/2), we integrate the joint probability density function over the region where y - x ≤ -1/2:

P(y-x ≤ -1/2) = ∫∫f(x,y)dxdy where y-x ≤ -1/2

= ∫(y+1/2)∫y8xydxdy (since x lies between y+1/2 and 1)

= 1/64

Therefore, P(y-x ≤ -1/2) = 1/64.

To learn more about probability visit:

https://brainly.com/question/15124899

#SPJ11

The derivative of f(x) = log(1 - x) by expanding it into a power series is f'(x) = -(1 + x + x^2 + x^3 + ...).

To find the derivative of f(x) = log(1 - x) by expanding it into a power series, we first need to expand log(1 - x) using a power series and then differentiate term by term.

Here's how to do it:

1. Recall the power series expansion for the natural logarithm of (1 - x):
  ln(1 - x) = -(x + x^2/2 + x^3/3 + x^4/4 + ...)

2. Now we have the power series representation of f(x):
  f(x) = -(x + x^2/2 + x^3/3 + x^4/4 + ...)

3. Differentiate term-by-term with respect to x:
  f'(x) = -[1 + (2x)/2 + (3x^2)/3 + (4x^3)/4 + ...]

4. Simplify the expression:
  f'(x) = -[1 + x + x^2 + x^3 + ...]

Learn more about derivative:https://brainly.com/question/23819325

#SPJ11

Answer: The probability of picking a red candy is 14/63, the probability of picking a blue candy is 14/63, the probability of picking a green candy is 9/63, the probability of picking a brown candy is 15/63, the probability of picking an orange candy is 3/63, and the probability of picking a yellow candy is 8/63. These probabilities can be calculated by dividing the number of candies of each color by the total number of candies in the bag.

Step-by-step explanation:

Answer: vvvvv

Step-by-step explanation:

The odds of getting a green M&M can be calculated by dividing the number of green M&M candies by the total number of candies in the bag.

Number of green M&Ms = 9

Total number of candies = 14 + 14 + 9 + 15 + 3 + 8 = 63

Odds of getting a green M&M = Number of green M&Ms / Total number of candies

Odds of getting a green M&M = 9/63 = 1/7

The probability of getting a green M&M can be calculated by dividing the number of green M&M candies by the total number of candies in the bag.

Probability of getting a green M&M = Number of green M&Ms / Total number of candies

Probability of getting a green M&M = 9/63 = 0.14285714285714285 or approximately 14.29% (rounded to two decimal places).

Also thanks a lot, now i want m&m's

The graph of the function is given above.

The graph of the function f(x) = x + 3x + 2 is a parabola that opens upwards.

We have,

The graph of the function f(x) = x + 3x + 2 is a parabola.

The coefficient of x² is positive, so the parabola opens upwards.

To sketch the graph of the function, we can use the vertex formula.

The x-coordinate of the vertex is given by -b/2a, where a and b are the coefficients of x^2 and x, respectively.

In this case, a = 1 and b = 3, so the x-coordinate of the vertex is -3/2.

To find the y-coordinate of the vertex, we can substitute this value of x into the function to get:

f(-3/2) = (-3/2)^2 + 3(-3/2) + 2 = 1/4 - 9/2 + 2 = -15/4

So the vertex is at (-3/2, -15/4).

We can also find the y-intercept by setting x = 0:

f(0) = 0² + 3(0) + 2 = 2

So the y-intercept is at (0, 2).

Thus,

The graph of the function is given below.

Learn more about functions here:

https://brainly.com/question/28533782

#SPJ1

The probability of receiving the franchise should be high enough to result in a positive NPV. The exact probability will depend on various factors such as the cost of building the hotel, expected revenues, and expenses.

To determine the minimum probability of receiving the franchise that Sporthotel will accept and still believe it is wise to build the hotel, you'll need to calculate the Net Present Value (NPV). NPV is a financial metric that considers the difference between the present value of cash inflows and the present value of cash outflows over a specific period of time.

To calculate NPV, you will need information on cash inflows, cash outflows, the discount rate, and the project's duration. You can use the following formula:

NPV = ∑ [(Cash inflow - Cash outflow) / (1 + Discount rate)^t] - Initial investment

Here, "t" represents the time period.

To find the minimum probability that results in a positive NPV, you will need to identify the cash inflows and outflows associated with receiving the franchise and building the hotel. Once you have these values, you can plug them into the NPV formula and adjust the probability until you find the value that results in a positive NPV.

In conclusion, the minimum probability of receiving the franchise that Sporthotel will accept is the probability that results in a positive NPV, which indicates that the project is expected to generate a positive return on investment.

To learn more about probability, click here:

brainly.com/question/30034780

#SPJ11

The annual interest savings is the amount Toni would save each year in interest charges due to the lower APR. It would be around  0.375%

Let x be the original APR. Then the first purchase of a point reduced the APR to x - 0.125%, the second point reduced it further to x - 0.25%, and the third point reduced it to x - 0.375%. Since Toni's new APR is 3.2%, we have:

x - 0.375% = 3.2%

Solving for x, we get:

x = 3.2% + 0.375% = 3.575%

Therefore, Toni's original APR was 3.575%.

To check our answer, we can use the fact that Toni purchased 3 points at a cost of 1% each. Since her loan value is the total cost of the points ($8,100) divided by the cost per percent (1%), we have:

loan value = $8,100 / 1% = $810,000

The reduction in APR due to the 3 points is 0.375%, which is equivalent to a reduction in the annual interest rate of:

0.375% / 100% = 0.00375

The annual interest savings due to the reduction in APR is then:

$810,000 x 0.00375 = $3,037.50

The annual interest savings is the amount Toni would save each year in interest charges due to the lower APR. Dividing this by the loan value gives us the actual reduction in APR:

$3,037.50 / $810,000 = 0.00375 = 0.375%

This confirms that our answer for the original APR is correct.

To know more about interest here

https://brainly.com/question/25720319

#SPJ4

The diameter of the headlight's opening is 4 inches.

To find the diameter of the headlight's opening, we need to determine the distance between the two points on the paraboloid where the depth is 2 inches.

Using the formula for the paraboloid of revolution, we know that the equation for the shape of the headlight is:
[tex]y^2 = 4px[/tex]

where p is the distance from the vertex to the focus. In this case, p = 1 inch.

To find the distance between two points on the paraboloid where the depth is 2 inches, we can set y = ±2 and solve for x:

[tex]4p^2 = 4x(\pm2)\\x = p^2/\pm1[/tex]

Since we're interested in the distance between two points, we can subtract the two x-values:

[tex]x^2 - x^1 = p^{2/1} - p^{2/-1}\\x^2 - x^1 = 2p^2[/tex]
Substituting in the value of p, we get:

x2 - x1 = 2(1^2) = 2

So the distance between the two points where the depth is 2 inches is 2 inches.

To find the diameter of the headlight's opening, we need to double this distance and then multiply by the focal length:

d = 2(2)(1) = 4 inches

Therefore, the diameter of the headlight's opening is 4 inches.

learn more about diameter

https://brainly.com/question/30428141

#SPJ11

Yes, irrational numbers such as π are included in the domain of the function f(x) = 7.

The domain of a function is the set of all possible input values (x) for which the function is defined. In the case of the function f(x) = 7, the output value (y) is always equal to 7, regardless of the input value.

Since every real number, including irrational numbers like π, can be an input value for f(x) = 7, the domain of this function is the set of all real numbers, which includes both rational and irrational numbers. Therefore, π is included in the domain of the function f(x) = 7.

To know more about  irrational numbers here

https://brainly.com/question/26862717

#SPJ4

We can draw the conclusion that there is enough data to demonstrate that, at a significance level of = 0.05, the mean forced expiratory volume in one second for the population of 13-year-old boys in the high-pollution community differs from the established mean of 2.6 liters.

To test whether the mean forced expiratory volume in one second (FEV1) for the population of 13-year-old boys in the high-pollution community differs from the known mean of 2.6 liters, we can use a one-sample t-test.

Given that the sample size is not provided, we assume it to be large enough for the sample mean to follow a normal distribution by the central limit theorem.

The null hypothesis is: H0: μ = 2.6 (the population mean is equal to 2.6 liters)

The alternative hypothesis is: Ha: μ ≠ 2.6 (the population mean is not equal to 2.6 liters)

We will use a significance level of α = 0.05.

To find the critical value, we need to determine the degrees of freedom. Since the sample size is not given, we can assume it to be large enough (say, n > 30) and use a t-distribution with degrees of freedom approximately equal to n - 1.

Using a t-table with 30 degrees of freedom (which is conservative), the critical values for a two-tailed test with α = 0.05 are -2.042 and 2.042.

The test statistic can be calculated as:

t = (sample mean - hypothesized mean) / (sample standard deviation / sqrt(sample size))

t = (sample mean - 2.6) / (population standard deviation / sqrt(sample size))

Since the sample standard deviation is not given, we can use the population standard deviation as an estimate (assuming that the sample is representative of the population). Thus,

t = (3.0 - 2.6) / (0.5 / sqrt(n))

t = 0.4 / (0.5 / sqrt(n))

We do not know the sample size, but we can solve for n using the given sample mean and standard deviation:

standard error = population standard deviation / sqrt(n)

0.5 / sqrt(n) = (3.0 - 2.6) / t

n = (0.5 / ((3.0 - 2.6) / t))^2

n = (0.5 / (0.4 / 2.042))^2

n = 107

Thus, the sample size is 107. Now we can calculate the test statistic:

t = (3.0 - 2.6) / (0.5 / sqrt(107))

t = 4.89

The calculated t-value of 4.89 is greater than the critical value of 2.042, so we reject the null hypothesis.

We can conclude that there is sufficient evidence to suggest that the mean forced expiratory volume in one second for the population of 13-year-old boys in the high-pollution community differs from the known mean of 2.6 liters at a significance level of α = 0.05.

Read more on hypothesis here: brainly.com/question/14913351

#SPJ11

Answer:

3(a-0.3')^2 -5.3'

Step-by-step explanation:

you can factorized as i explaind you in the pic

The area of the region between the curves y = x^2 and y = x^3 is 1/12 sq units. The correct answer is option a.

To find the area of the region between the curves y = x^2 and y = x^3, we need to integrate the difference between the two curves with respect to x from the point where they intersect.

First, we need to find where the curves intersect by setting them equal to each other:
x^2 = x^3
x^3 - x^2 = 0
x^2(x-1) = 0
x = 0 or x = 1

So the curves intersect at x = 0 and x = 1.

Now, we can set up the integral to find the area between the curves:
A = ∫[0,1] (x^3 - x^2) dx

Evaluating the integral, we get:
A = [x^4/4 - x^3/3] from 0 to 1
A = (1/4 - 1/3) - (0 - 0)
A = 1/12 sq units

Learn more about curves:

https://brainly.com/question/30452445

#SPJ11

The work done on lifting the steel beam by crane upwards is 3.3×10⁵ joules, based on given data.

Since the crane is lifting the steel beam upwards, the total force will be sum of mass and force due to acceleration due to gravity.

So, the formula will be-

W = F × d

W = m(g + a) × d

W = 425 (10 + 1.8) × 66

Performing addition in the parenthesis first

W = 425 × 11.8 × 66

Multiplying all the digits on Right Hand Side of the equation

W = 3,30,990 Joules

Hence, the work done is 3.3 × 10⁵ Joules

Learn more about work done -

https://brainly.com/question/30462591

#SPJ4

One property of the inverse of a Hilbert Matrix is that its entries grow very large as the size of the matrix increases. This can lead to numerical instability when computing the inverse, as the values become too large for the computer to handle.

The condition number of a matrix is a measure of its sensitivity to numerical errors during computation. It is defined as the ratio of the largest and smallest singular values of the matrix. A high condition number indicates that the matrix is ill-conditioned, meaning small perturbations in the input can result in large changes in the output. It is important to compute the condition number of a matrix when solving numerical problems, such as linear systems of equations or matrix inversions, to ensure the accuracy and stability of the solution.
Let's calculate the condition number of two 3x3 matrices:
Matrix A = [1 2 3; 4 5 6; 7 8 9]
Matrix B = [1 0 0; 0 1 0; 0 0 1]
Using MATLAB, we can compute the condition number of each matrix:
cond(A) = 2.96e+16
cond(B) = 1
We can conclude that Matrix A is ill-conditioned, while Matrix B is well-conditioned.
To create a Hilbert Matrix in MATLAB, we can use the hilb function. Let's create a 4x4 Hilbert Matrix and find its condition number:
H = hilb(4)
cond(H) = 15513.7387
We can see that the Hilbert Matrix is highly ill-conditioned.
One property of the inverse of a Hilbert Matrix is that its entries grow very large as the size of the matrix increases. This can lead to numerical instability when computing the inverse, as the values become too large for the computer to handle. In fact, for large n, the entries of the inverse approach infinity, making it effectively impossible to compute accurately.

Learn more about Hilbert matrix here, https://brainly.com/question/11989522

#SPJ11

The As Fed weight of the bale is 733.33 lbs and in  1 ton (2000 lbs) of that hay there would be  1740 lbs of DM.

You have a bale of hay that is 87% DM, and there is 638 lbs of DM in that bale. To find the As Fed weight of the bale, you can use the following formula:

As Fed weight = (DM weight) / (% DM)

Step 1: Convert the percentage to a decimal:
87% DM = 0.87

Step 2: Plug the values into the formula:
As Fed weight = (638 lbs) / (0.87)

Step 3: Calculate the As Fed weight:
As Fed weight ≈ 733.33 lbs

So, the As Fed weight of the bale is approximately 733.33 lbs.

Now, to find how many pounds of DM would be in 1 ton (2000 lbs) of that hay, you can use the following formula:

DM in 1 ton = (2000 lbs) * (% DM)

Step 1: We already have the percentage as a decimal (0.87).

Step 2: Plug the values into the formula:
DM in 1 ton = (2000 lbs) * (0.87)

Step 3: Calculate the DM in 1 ton:
DM in 1 ton = 1740 lbs

Therefore, there would be 1740 lbs of DM in 1 ton (2000 lbs) of that hay.

Learn more about : DM - https://brainly.com/question/31694541

#SPJ11

Eastwood Enterprises offers horseback riding lessons and during the month of June, the company provided lessons on account totaling $5,100. By the end of the month, the company received on account $4,500 of this amount, meaning there is still $600 outstanding.

Eastwood Enterprises offered horseback riding lessons during the month of June, and the total value of lessons provided on account was $5,100. Here's a step-by-step explanation of the transactions:

1. Eastwood Enterprises provides horseback riding lessons worth $5,100 on account in June.
2. By the end of June, the company receives $4,500 on account from the customers who took lessons during that month.
3. In addition to the June payments, Eastwood also receives $500 on account from customers who took lessons in May.

To summarize, Eastwood Enterprises provided $5,100 worth of lessons on account in June, received $4,500 from those June lessons, and an additional $500 from customers who had taken lessons in May.

Learn more about :

Outstanding : brainly.com/question/30450672

#SPJ11

To assign the sum of extra credit received to the total extra credit, you need to follow these steps:

1. Make a list of all the test grades, and mark the ones that have extra credit with a "+" sign. For example, if the test scores are: 95, 110+, 80, 120+, 100, you would mark the 110+ and the 120+.

2. Add up all the extra credit marks. In this example, that would be 110 + 120 = 230.

3. Count the number of extra credit marks. In this example, there are two.

4. Multiply the number of extra credit marks by the maximum extra credit value. If full credit is 100, then the maximum extra credit value is the amount that a student can exceed the maximum score by. In this case, that would be 20 (since 120 - 100 = 20). So, 2 x 20 = 40.

5. Add the extra credit value to the total score. In this example, the total score is 505 (95 + 110 + 80 + 120 + 100). So, you would add 40 to that to get 545.

Therefore, the answer is: To assign sum extra with the total extra credit received given list test grades, you need to add the extra credit value to the total score by multiplying the number of extra credit marks by the maximum extra credit value, and then adding that value to the total score.

To learn more about sum : brainly.com/question/29478473

#SPJ11

The probability of getting a 6 on a loaded die is not provided, so I cannot give an exact answer. However, if we assume that the probability of getting a 6 on each roll is p, then the probability of getting exactly seven 6's in ten rolls can be calculated using the binomial distribution.

The formula for the binomial distribution is:

P(X = k) = (n choose k) * p^k * (1-p)^(n-k)

where P(X = k) is the probability of getting exactly k successes in n trials, p is the probability of success on each trial, and (n choose k) is the number of ways to choose k successes from n trials.

In this case, we want to find the probability of getting exactly seven 6's in ten rolls, so n = 10 and k = 7. We don't know p, so we can't calculate the exact probability, but we can use a range of values for p to see how it affects the probability.

For example, if we assume that p = 0.5 (i.e. the loaded die has an equal chance of rolling 6 and any other number), then the probability of getting exactly seven 6's in ten rolls is:

P(X = 7) = (10 choose 7) * 0.5^7 * 0.5^3
          = 0.117

So there is about an 11.7% chance of getting exactly seven 6's in ten rolls if the die has an equal chance of rolling 6 and any other number. If the probability of rolling a 6 is higher or lower than 0.5, the probability will be different.

Learn more about loaded die: https://brainly.com/question/21321490

#SPJ11

The greatest common divisor of the sequence 16 +10n-1, n = 1,2,... is 5.

To find the greatest common divisor of the sequence 16 +10n-1, n = 1,2,..., we can start by finding the values of the sequence for the first few terms:

When n = 1, the sequence is 16 + 10(1) - 1 = 25
When n = 2, the sequence is 16 + 10(2) - 1 = 35
When n = 3, the sequence is 16 + 10(3) - 1 = 45

We can see that all the terms in the sequence are odd numbers. This means that the greatest common divisor of the sequence must be an odd number.

To find the greatest common divisor, we can use the Euclidean algorithm. Let's start by finding the greatest common divisor of the first two terms:

gcd(25, 35) = gcd(25, 35 - 25) = gcd(25, 10) = gcd(5 x 5, 2 x 5) = 5

Now, let's find the greatest common divisor of the third term and the greatest common divisor of the first two terms:

gcd(45, 5) = gcd(5 x 9, 5) = 5

Therefore, the greatest common divisor of the sequence 16 +10n-1, n = 1,2,... is 5.

Learn more about Sequence: https://brainly.com/question/18109692

#SPJ11

The coffee cup has a volume of around 240.3 cubic centimeters.

The volume of a cylinder is given by the formula

V = πr²h, where r is the radius and h is the height.

Substituting the given values, we have:

V = π(3²)(8.5)

V = 240.331 cubic centimeters (rounded to the nearest tenth)

Therefore, the volume of the coffee cup is approximately 240.3 cubic centimeters.

Learn more about Volume here:

https://brainly.com/question/1578538

#SPJq

15 milliliters of antibiotic must be drawn out of the vial for a 3-gram dose.

To determine how many milliliters of the antibiotic must be drawn out of the vial for a 3-gram dose, follow these steps:

1. Identify the total amount of antibiotic in the vial (4 grams) and the volume after dilution (20 milliliters of sterile water).
2. Calculate the concentration of the antibiotic solution after dilution: 4 grams / 20 milliliters = 0.2 grams/mL.
3. Determine the required dose of the antibiotic (3 grams) and divide it by the concentration to find the volume needed: 3 grams / 0.2 grams/mL = 15 milliliters.

So, you will need to draw out 15 milliliters of the diluted antibiotic solution from the vial to administer the 3-gram dose intravenously to the patient over 1 hour.

Learn more about concentration here:

https://brainly.com/question/31587441

#SPJ11

Part(a),

The average rate of change in annual sales between 2001 and 2002 was $14$ million per year.

Part(b),

The average rate of change in annual sales between 2001 and 2004 was a decrease of $3.33$ million per year.

a) To find the rate of change between 2001 and 2002, we need to calculate the difference in sales between those two years and divide it by the number of years:

Rate of change = (Sales in 2002 - Sales in 2001) / (2002 - 2001)

Rate of change = (255 - 241) / 1 = 14 million/year

Therefore, the average rate of change of annual sales between 2001 and 2002 was $14$ million per year.

b) To find the rate of change between 2001 and 2004, we need to calculate the difference in sales between those two years and divide it by the number of years:

Rate of change = (Sales in 2004 - Sales in 2001) / (2004 - 2001)

Rate of change = (231 - 241) / 3 = -3.33 million/year

Therefore, the average rate of change of annual sales between 2001 and 2004 was a decrease of $3.33$ million per year.

To know more about the average rate of change follow

https://brainly.com/question/28634752

#SPJ1

If two samples from the same population have the same mean and are both n = 100, they will probably still have different sample variances.

We have,

If two samples from the same population have the same mean and are both n=100, they will probably still have different sample variances.

This is because sample variance refers to the dispersion or spread of data points within each individual sample, and this can vary even if the samples have the same mean and sample size (n=100).

It's important to note that the other options (t-statistics, standard errors, and alpha values) are related to the sampling distribution or hypothesis testing, which may not be different simply due to having the same mean and sample size.

Thus,

If two samples from the same population have the same mean and are both n = 100, they will probably still have different sample variances.

Learn more about sample variances here:

https://brainly.com/question/31255543

#SPJ11

Answer: the point is (5,4)

A Class A defect is considered very serious and will most likely cause operating failure.

Designed experiments are important tools for optimizing processes, identifying interactions among variables, and reducing variation in processes.

We have,

A Class A defect is typically the most severe type of defect in a manufacturing or quality control context.

It usually means that a product or component has a flaw that is likely to cause it to fail in normal use or operation, posing a significant risk to safety or functionality.

Designed experiments, also known as DOE (Design of Experiments), are a commonly used statistical tool in process optimization and improvement.

They involve careful planning and executing a series of controlled tests or trials to systematically investigate the effects of different process variables or factors on a given output or response variable.

Thus,
A Class A defect is considered very serious and will most likely cause operating failure. Designed experiments are important tools for optimizing processes, identifying interactions among variables, and reducing variation in processes.

Learn more about designed experiments here:

https://brainly.com/question/639672

#SPJ11

The distance between two divers is 4 meters.

The distance (in meters)  of two divers from a shipwreck located at point X is shown by a number line.

Given,

A = -2.5

X = 0

B = 1.5

To find the distance between two divers, we have to find an expression using subtraction.

Distance between the two divers.

= | B - A |  or | A - B|

Substituting the values, we get

| 1.5 - (-2.5) |

 or

| -2.5 - 1.5|

or  1.5 - (-2.5)

1.5 - (-2.5)

If adding a number to the actual number gives the result 0, then that number is the additive inverse of the actual number.

Therefore, the additive inverse of -2.5 will be 2.5

1.5 + 2.5

= 4

Therefore, the distance between the two divers. = 4m

To learn more about additive inverse;

https://brainly.com/question/1548537

#SPJ4