Two posssible lewis structures for the molecule ch2s are given. determine the formal charge on each atom in both structures
The formal charge on each atom can be known by counting up the number of valence electrons that is present on each atom.
What is Lewis structure?The term Lewis structure is the representation of a compound using its symbols and showing the valence electrons as dots. This question is incomplete as the Lewis structures were not shown.
If it is shown, we can know the formal charge on each atom by counting up the number of valence electrons that is present on each atom.
Learn more about Lewis structure: https://brainly.com/question/4144781
Which plants have a fibrous root system? (Select all that apply.) grass dandelion carrot corn
The plants which have a fibrous root system are
GrassCornWhat is a fibrous root?A fibrous root system is a root system which consists of large mass of roots of nearly equal size
Some few examples of plants with fibrous roots system are as follows:
Rice plantsSugarcane plantsOnionsPinesAsparagusMaizeIn conclusion; the plants which have a fibrous root system are grasses and corns.
Learn more about fibrous root system:
https://brainly.com/question/1600214
Calculate the number of moles when 3.00l of a gas at 814 mmhg and 25 °c?
So
No of moles=n
[tex]\\ \rm\rightarrowtail PV=nRT[/tex]
[tex]\\ \rm\rightarrowtail n=\dfrac{PV}{RT}[/tex]
[tex]\\ \rm\rightarrowtail n=\dfrac{814(3)}{25R}[/tex]
[tex]\\ \rm\rightarrowtail n=2442/25R[/tex]
[tex]\\ \rm\rightarrowtail n=97.7Rmol[/tex]
Voluntary muscles
a.are muscles that work automatically.
b.are only in your arms and legs.
c.are muscles that you can control.
d.are muscles that push.
Answer: C.
Explanation:
Voluntary muscle are muscles that you can control.
Using the data below, what conclusion could you draw?
Car
Cara
Cars
Massi) Trial Time (3) Trial 2 Time(s).Trial 3 Time (s) Average Time (s)
15.5
4.7
49
47
4.8
20.2
3.3
2
3.1
28
79
59
5.6
5.8
Based on the data provided, the mass of the object is inversely proportional to acceleration and directly proportional to the time taken to cover the distance.
How does the mass of a object affect its acceleration?Given that the force applied on an object is constant, the acceleration of the object is inversely proportional to the mass of the object.
According to the Newton's second law of motion, the acceleration of an object is inversely proportional to the mass of the object and directly proportional to the force and takes place in the direction of the applied force.
Based on the data provided, the more mass the car has, the more time it takes to complete the distance.
Therefore, it can be concluded that the mass of the object is inversely proportional to acceleration and directly proportional to the time taken to cover the distance.
Learn more about mass and acceleration at: https://brainly.com/question/14344386
What do the neural pathways for taste, hearing, sight, and touch have in common
Answer:
All of the signals pass through the thalamus
Explanation:
The molar mass of sucrose (c12h22o11) is 342.3 g/mol. a chemist has a 0.500-mol sample of sucrose. what is the mass, in grams, of this sample? 171 grams 342 grams 500 grams 684 grams
Mass is the measure of the quantity of the substance present in the sample containing a compound or molecule. The mass of sucrose in the sample is 171 g.
What is mass?The mass of the compound in the sample is the product of the number of moles of the substance and the molar mass of the compound.
Given,
The molar mass of the sucrose compound = 342.3 g/mol
Number of moles of sucrose = 0.500 moles
Mass of sucrose is calculated as:
[tex]\begin{aligned}\rm mass &= \rm moles \times molar \; mass\\\\&= 0.500 \;\rm moles \times 342.3 \;\rm g/mol\\\\&= 171.15 \;\rm gm\end{aligned}[/tex]
Therefore, option A. 171 gm is the mass of sucrose.
Learn more about mass here:
https://brainly.com/question/4058235
The correct answer is option A: 171 grams
Explanation: Got 90% on the quiz on edge and got this answer right
Between which atoms do hydrogen bonds form in water?
A) Oxygen and hydrogen atoms in the same water molecule
B) Oxygen and hydrogen atoms in different water molecules
C) Hydrogen atoms in the same water molecule
D) Oxygen atoms of different water molecules
Answer:
right answer is A bcz
Explanation:
In the case of water, hydrogen bonds form between neighboring hydrogen and oxygen atoms of adjacent water molecules. The attraction between individual water molecules creates a bond known as a hydrogen bond.
Answer:
oxygen and hydrogen indifferent molecules
Consider the combustion reaction for acetylene. 2c2h2(l) 5o2(g) right arrow. 4co2(g) 2h2o(g) if the acetylene tank contains 37.0 mol of c2h2 and the oxygen tank contains 81.0 mol of o2, what is the limiting reactant for this reaction? c2h2 o2 co2 h2o
The limiting reactant for the combustion reaction for acetylene is oxygen.
What is limiting reagent?Limiting reagents are those reagent which is present in less quantity as compared to the other reagent present for the formation of product.
Given chemical reaction is:
2C₂H₂(l) + 5O₂(g) → 4CO₂(g) + 2H₂O(g)
From the stoichiometry of the reaction, it is clear that:
2 moles of C₂H₂ = react with 5 moles of O₂
37 moles of C₂H₂ = react with 5/2×37=92.5 moles of O₂
And given moles of oxygen is 81 moles.
81 moles of O₂ = reacts with 2/5×81=32.4 moles of C₂H₂
And given moles of C₂H₂ = 81 moles.
Hence, O₂ is the limiting reagent.
To know more about limiting reagent, visit the below link:
https://brainly.com/question/14222359
Answer:
O2 is the limiting reactant.
In an atom the number of electrons is
as the
number of protons.
the only time electrons are equal to protons is when the charge is neutral. if the charge is positive then there's more protons.
if the charge is negative then there's more electrons.
how many liters of water would it require to 36 grams of the substance?
3 liters
________________
Why does a short circuit occur?
A. Current likes to try and break the circuit whenever possible
B. Current always follows the path of least resistance
C. Current always follows the path of most resistance
D. Current randomly flows around the circuit
Answer:
Current randomly flows around the circuitt
Answer:
B. Current always follows the path of least resistance.
Explanation:
A short circuit occurs when the current finds a way to bypass the appliance on a path that has little or no resistance. When one path through the circuit has 0 resistance (a short circuit), current follows the path of least resistance only.
What is the molarity if 16. 0 grams of NaOH is dissolved in 855 mL of solution?
Answer:
734.0 grams
Explanation:
Because 16.0 and 855 mL it is 734.0 grams :) hope it helps
Consider the equation for the formation of water. 2h2 o2 right arrow. 2h2o what is the theoretical yield of h2o if 130 g of h2o is produced from 18 g of h2 and an excess of o2? 18 g 81 g 130 g 160 g
The theoretical yield is the reaction yield that measures the product of the reaction from the conversion of the limiting reagent. The theoretical yield is 160 gm.
What is mass?Mass or the theoretical yield is the result of the multiplication of mole and the molar mass of the compound.
The reaction between hydrogen and oxygen is shown as,
[tex]\rm 2H_{2} + O_{2} \rightarrow 2H_{2}O[/tex]
Moles of water is calculated as:
[tex]\begin{aligned}\rm moles &= \rm \dfrac{mass}{molar\; mass}\\\\&= \dfrac{18}{2}\\\\&= 9\;\rm moles\end{aligned}[/tex]
The theoretical yield of water is calculated as:
[tex]\begin{aligned}\rm \text{weight of water} &= \rm moles \times molar \; mass\\\\&= 9 \times 18\\\\&= 162 \;\rm gm\end{aligned}[/tex]
Therefore, option D. 160 gm is the theoretical yield of water.
Learn more about theoretical yield here:
https://brainly.com/question/918691
Would the ph at the equivalence point be acidic, basic, or neutral for each given titration?.
Answer:
At the equivalence point, equal amounts of H+ and OH– ions will combine to form H2O, resulting in a pH of 7.0 (neutral). The pH at the equivalence point for this titration will always be 7.0, note that this is true only for titrations of strong acid with strong base.
Explanation:
What chemical property determines the strength of an acid?.
What is the effect on the total pressure inside a closed vessel if... a) More gas is added? b) The container's volume is increased?
(a) When more gas is added, the number of moles of the gas increases, and the total pressure of gas inside same vessel will increase.
(b) When the conatiner's volume is increased, the total pressure of gas inside the vessel will decrease.
Ideal gas lawThe ideal gas law of general gas equation, can be used to describe the behavior of an ideal gas.
The ideal gas law is given as;
PV = nRT
where;
P is pressure of the gasV is the volume of the gasn is the number of gas molesR is ideal gas constantT is temperature of the gasWhen more gas is added, the number of moles of the gas increases, and the total pressure of gas inside same vessel will increase.
When the conatiner's volume is increased, the total pressure of gas inside the vessel will decrease.
Learn more about ideal gas law here: https://brainly.com/question/12873752
What is the molarity of a solution formed when you add 200. Ml of water to 50. Ml of 5. 0 m hcl
The molarity of a solution formed when you add 200 mL of water to 50 mL of 5. 0 M HCl is 1.25M.
How to calculate molarity?The molarity of a solution can be calculated using the following formula:
M1V1 = M2V2
Where;
M1 = molarity of a baseM2 = molarity of acidV1 = volume of baseV2 = volume of acidM1 × 200 = 50 × 5
200M1 = 250
M1 = 250/200
M1 = 1.25M
Therefore, the molarity of a solution formed when you add 200 mL of water to 50 mL of 5. 0 M HCl is 1.25M.
Learn more about molarity at: https://brainly.com/question/12127540
what happens to a cell placed in an isotonic solution
Answer:
The cell's volume will remain stable.
Explanation:
If a cell is placed in an isotonic solution, there will be no net flow of water into or out of the cell, and the cell's volume will remain stable. If the solute concentration outside the cell is the same as inside the cell, and the solutes cannot cross the membrane, then that solution is isotonic to the cell.
How are oceans and salt marshes different? B A Salt marshes have deeper water than oceans. Salt marshes have shallower water than oceans. Salt marshes have more organisms than oceans. D . Salt marshes have more wave action than oceans. С
Answer:
Salt marshes have shallower water than oceans
Explanation:
oceans go way deeper then salt marshes with the deepest part of thr ocean at 35,876ft deep
Answer: Salt marshes have shallower water than oceans.
Explanation: oceans are deeper
Determine the mass of sodium acetate necessary to produce 100 ml of an acetate buffer
Explanation:
Ethanoic acid is a weak acid and dissociates:
C
H
3
C
O
O
H
⇌
C
H
3
C
O
O
−
+
H
+
For which
K
a
=
[
C
H
3
C
O
O
−
]
[
H
+
]
[
C
H
3
C
O
O
H
]
=
1.8
×
10
−
5
Please remember that these are equilibrium concentrations .
p
K
a
=
−
log
K
a
=
−
log
[
1.8
×
10
−
5
]
=
4.74
n
=
c
×
v
∴
n
C
H
3
C
O
O
H
=
0.20
×
200.0
1000
=
0.04
How does the presence of a nucleus provide a method of basic cell classification?
Answer:
Sample Respond: The nucleus maintains the integrity of genes and controls the activities of the cell by regulating gene expression—the nucleus is, therefore, the control center of the cell.
good luck
Explanation:
I got 100 mark as brainiest
Find grocery items in your home look and see the product label at the back of each item identify the elements or compounds on each item use the table below for this activity grocery time 123456789 10 elements compounds
The chemical elements and compounds that are present in a grocery item such as mayonnaise include:
OilEmulsifier Vinegar SpicesSugarWhat is a product label?A product label can be defined as a paper document which contains information about the nutrients, chemical elements, and other compounds that are present in a product such as a battery, food or an edible material.
This ultimately implies that, a product label is a paper document which is used by manufactures to specify the nutrients, chemical elements, and other compounds that were used to make a particular product.
Read more on product label here: https://brainly.com/question/14446515
A company produces a colorless vinegar that is 5.0% HC2H3O2 in water. Using thymol blue as an indicator, a student titrates a 15.0-milliliter sample of the vinegar with 43.1 milliliters of a 0.30 M NaOH (aq) solution until the acid is neutralized. Identify the negative ion in the NaOH(aq) used in this titration.
The negative ion in aqueous sodium hydroxide, NaOH(aq) is hydroxide ion, OH-.
What is a neutralization reaction?A neutralization reaction is a reaction between an acid and a base to form salt and water only.
The reaction between vinegar and NaOH is a neutralization reaction which produces a salt and water only.
NaOH is composed of a positive sodium ion, Na+ and a negative hydroxide ion, OH-
Therefore, the negative ion in the NaOH(aq) used in this titration is hydroxide ion, OH-.
Learn more about hydroxide ion at: https://brainly.com/question/3078877
What are the key control points within the citric acid cycle?
The citrate synthase, isocitrate dehydrogenase, and the α-ketoglutarate dehydrogenase complex are the three key control points.
What are the key control points within the citric acid cycle?The key control points in citric acid cycle are the reactions catalyzed by citrate synthase, isocitrate dehydrogenase, and the α-ketoglutarate dehydrogenase complex.
So we can conclude that citrate synthase, isocitrate dehydrogenase, and the α-ketoglutarate dehydrogenase complex are the three key control points.
Learn more about cycle here: https://brainly.com/question/8283140
The citric acid cycle is a chemical cycle that releases stored energy. Citrate synthase, isocitrate dehydrogenase, and alpha-ketoglutarate dehydrogenase are the control point of the cycle.
What is a citric acid cycle?The citric acid cycle or the TCA cycle (tricarboxylic acid cycle) is the chemical series of reactions that releases energy from food sources like fats, carbohydrates, and proteins.
The TCA cycle includes enzymes and many substances that regulate it but three major points are Citrate synthase, isocitrate dehydrogenase, and alpha-ketoglutarate dehydrogenase.
Therefore, they get inhibited, regulated, and limit the rate of the reaction.
Learn more about the citric acid cycle here:
https://brainly.com/question/26362996
#SPJ4
Generic Formula & Molecular Geometry of o3
Answer:
We use the following formula as given below Use the formula below to find the lone pair on the oxygen atom of the SO3 molecule. L.P (O) = V.E (O) – N.A (S-O) Lone pair on the terminal oxygen atom in SO3 = L.P (O)
Explanation:
It's sunny in new york, but it is cool. where would you expect to find this lizard during the day? question 16 options: under a rock in a damp stream bed basking in a sunny spot in a hole in the ground
It's sunny in new york, but it is cool, we will expect to find lizard under a rock or in a hole in the ground.
Why lizards are not comfortable in cold?Lizards are not comfortable in the cold season as they are cold blooded animal, so their body will gets slow in the winter season.
During the winter season or in the cool weather, lizards will go to the places where they faces less cooling. And these places be like inside the rocks, under a hole, under the ground, in the trunks of trees, etc.
Hence, options (1) and (4) are correct.
To know more about lizards, visit the below link:
https://brainly.com/question/407800
A chemist creates a reaction between nitrogen and oxygen to form nitrogen monoxide. This reaction is shown by the equation N2(g) + O2(g) ⟶ 2NO(g). The time interval of this reaction is t1 = 12 seconds to t2 = 22 seconds. During this reaction, the O2 concentration changes from 0.237 mol/L to 0.207 mol/L.
What is the average reaction rate for O2 in this reaction?
Answer: here's the answer to your question
1.3 ×10¹ is the average reaction rate for O[tex]_2[/tex] in this reaction N2(g) + O2(g) ⟶ 2NO(g).
What is rate of reaction?
The pace during which a chemical response takes place is known as the reaction rate and rate of reaction. It is proportional to the rise in product concentration per unit time and the fall in reactant concentration per unit time. Response times can differ wildly.
For instance, cellulose burns in a fire in a matter of seconds as opposed to the sluggish, years-long oxidative corrosion of iron that occurs under Earth's atmosphere. For the majority of reactions, the rate gets slower as it goes along. By tracking the concentration changes over time, one can calculate the pace of a reaction.
concentration of N[tex]_2[/tex] =0.34/0.75=0.45M
concentration of O[tex]_2[/tex] =0.34/0.75=0.45M
concentration of NO=1.2/0.75=1.6
Kc = [NO]²/ [ N[tex]_2[/tex] ] × [ O[tex]_2[/tex] ]
= [0.45]²/ [ 0.45 ] × [ 1.6 ]
= 1.3 ×10¹
Therefore, 1.3 ×10¹ is the reaction rate.
To know more about rate of reaction, here:
https://brainly.com/question/8592296
#SPJ3
In the titration of 50. 0 mL of 0. 400 M HCOOH with 0. 150 M LiOH, how many mL of LiOH are required to reach the equivalence point
The volume of the 0.15 M LiOH solution required to react with 50 mL of 0.4 M HCOOH to the equivalence point is 133.3 mL
Balanced equationHCOOH + LiOH —> HCOOLi + H₂O
From the balanced equation above,
The mole ratio of the acid, HCOOH (nA) = 1
The mole ratio of the base, LiOH (nB) = 1
How to determine the volume of LiOH Molarity of acid, HCOOH (Ma) = 0.4 MVolume of acid, HCOOH (Va) = 50 mLMolarity of base, LiOH (Mb) = 0.15 MVolume of base, LiOH (Vb) =?MaVa / MbVb = nA / nB
(0.4 × 50) / (0.15 × Vb) = 1
20 / (0.15 × Vb) = 1
Cross multiply
0.15 × Vb = 20
Divide both side by 0.15
Vb = 20 / 0.15
Vb = 133.3 mL
Thus, the volume of the LiOH solution needed is 133.3 mL
Learn more about titration:
https://brainly.com/question/14356286
Suggest the pH of the solution made when potassium oxide dissolves in water.
It gets basic
ie ph>7 for basic solutions