2. If 4c-3= -31, what is the value of -2c+11

Answer:

Molecular: [tex]Sr(NO_3)_2(aq) +Li_2SO_4(aq)\rightarrow SrSO_4(s)+2LiNO_3(aq)[/tex]

Ionic: [tex]Sr^{2+}(aq)+2NO_3^-(aq) +2Li^{2+}(aq)+SO_4(aq)^{2-}\rightarrow SrSO_4(s)+2Li^+(aq)+2NO_3^-(aq)[/tex]Net ionic: [tex]Sr^{2}(aq)+SO_4(aq)^{2-}\rightarrow SrSO_4(s)[/tex]

Explanation:

Hello!

In this case, since the molecular, ionic and net ionic equations show the complete molecules, ions and resulting ions respectively, for the reaction between strontium nitrate and lithium sulfate, we can notice the formation of solid strontium sulfate and lithium nitrate as shown below:

[tex]Sr(NO_3)_2(aq) +Li_2SO_4(aq)\rightarrow SrSO_4(s)+2LiNO_3(aq)[/tex]

Which is the molecular equation showing both reactants and products as molecules. Then, the ionic equation shows all the reactants and products as ions, considering that aqueous solutions dissociate whereas solid, liquid and gaseous molecules do not, therefore, we obtain:

[tex]Sr^{2+}(aq)+2NO_3^-(aq) +2Li^{2+}(aq)+SO_4(aq)^{2-}\rightarrow SrSO_4(s)+2Li^+(aq)+2NO_3^-(aq)[/tex]

Finally, for the net ionic equation, we cancel out the spectator ions, which are those at both reactants and products:

[tex]Sr^{2+}(aq)+SO_4(aq)^{2-}\rightarrow SrSO_4(s)[/tex]

Best regards!

A further explanation is below.

Given:

Strontium nitrate reacts with Lithium sulfate just to produce Strontium sulfate ([tex]Sr(NO_3)_2[/tex]) and Lithium nitrate ([tex]Li NO_3[/tex]).

The molecular equation will be:

→ [tex]Sr(NO_3)_2(aq) +Li_2SO_4(aq) \rightarrow SrSO_4 (s) +2LiNO_3 (aq)[/tex]

The complete ionic equation will be:

→ [tex]Sr^{2+} (aq) +2NO_3^- (aq) +2Li^+ (aq)+ SO_4^{2-} (aq) \rightarrow SrSO_4 (s)+2Li^+ (aq) +2NO_3^- (aq)[/tex]

By removing the uncharged ions from equation's will be:

Spectator ion:

→ [tex]2Li^+ (aq), 2NO_3^- (aq)[/tex]

Net ionic equation will be:

→ [tex]Sr^{2+}(aq)+SO_4^{2-} (aq) \rightarrow SrSO_4 (s)[/tex]

Thus the response above is right.

Learn more:

https://brainly.com/question/13843770

Answer:

V = 27.98 L

Explanation:

Given data:

Mass of CO₂ = 33.0 g

Pressure = 500 torr

Temperature = 27°C

Volume occupied = ?

Solution:

Number of moles of CO₂:

Number of moles = mass/molar mass

Number of moles = 33.0 g/ 44 g/mol

Number of moles = 0.75 mol

Volume of CO₂:

PV = nRT

R = general gas constant = 0.0821 atm.L/ mol.K  

Now we will convert the temperature.

27+273 = 300 K

Pressure = 500 /760 = 0.66 atm

By putting values,

0.66 atm×V = 0.75 mol × 0.0821 atm.L/ mol.K  × 300 K

V = 18.47 atm.L/0.66 atm

V = 27.98 L

The volume that will be occupied by 33.0 grams of CO2 at 500 torr and 27 °C is 28.11L.

The volume of an ideal gas can be calculated using the ideal gas law equation as follows:

PV = nRT

Where;

According to this question;

0.657 × V = 0.75 × 0.0821 × 300

0.657V = 18.4725

V = 18.4725 ÷ 0.657

V = 28.11L

Therefore, the volume that will be occupied by 33.0 grams of CO2 at 500 torr and 27 °C is 28.11L.

Learn more about ideal gas law at: https://brainly.com/question/4147359

Explanation:

To completely describe an electron in an atom, four quantum numbers are needed: energy (n), angular momentum (ℓ), magnetic moment (mℓ), and spin (ms).

Please follow me and make me Brainless

Answer:

hope it's correct.

Explanation:

element is nickel.

Answer:

29 mL HCl

General Formulas and Concepts:

Chem

Explanation:

Step 1: Define

6.2 M HCl

0.18 mol HCl

x L mol HCl

Step 2: Define conversions

1 L = 1000 mL

Step 3: Find L

6.2 M HCl = 0.18 mol HCl / x L HCl

(x L HCl)(6.2 M HCl) = 0.18 mol HCl

x L HCl = 0.18 mol HCl / 6.2 M HCl

x = 0.029032 L HCl

Step 4: Convert

[tex]0.029032 \ L \ HCl(\frac{1000 \ mL \ HCl}{1 \ L \ HCl} )[/tex] = 29.0323 mL HCl

Step 5: Check

We are given 2 sig figs. Follow sig fig rules.

29.0323 mL HCl ≈ 29 mL HCl

Answer:

29 mL HCl

Explanation:

Answer:

They are made up of electrons, neutrons and protons

Explanation:

Answer:

Violet only

Explination:

Violet is the only color that will eject electrons when it strikes sodium.

The colors that will eject electrons when there's a strike with sodium from the chart will be A. Violet and green.

From the complete information, William made a chart in order to illustrate the result of the experiment that was made with the photoelectric effect.

In this case, the colors that will eject electrons when they strike sodium, with the frequency threshold will be violet and green.

This was gotten from the result that the frequencies of light were lower than the frequency threshold.

Learn more about electrons on:

https://brainly.com/question/860094

Answer:

spermatozoon:A spermatozoon is a motile sperm cell or moving from of the haploid cell that is the male gamete.

spermatogonium : A cell produced at an early stage in the formation of spermatozoa, formed in the wall of a seminiferous tuble and giving rise by mitosis to spermatocytes.

Answer: E

Explanation:hope this helps you out

Answer:

Minimizes heat transfer

Explanation:

To keep my lunch from getting cold at the beach, a material the minimizes heat transfer will be the most desirable.

Answer:

V₂ =  511.59mL

Explanation:

Given data:

Initial volume = 450 mL

Initial pressure = 744 mmHg

Initial temperature = 33°C (33 +273 = 306 K)

Final temperature = 66°C (66+273 = 339 K)

Final pressure = 725 mmHg

Final volume =?

Formula:  

P₁V₁/T₁ = P₂V₂/T₂  

P₁ = Initial pressure

V₁ = Initial volume

T₁ = Initial temperature

P₂ = Final pressure

V₂ = Final volume

T₂ = Final temperature

Solution:

V₂ = P₁V₁ T₂/ T₁ P₂  

V₂ = 744 mmHg × 450 mL × 339 K / 306 K ×725 mmHg

V₂ = 113497200 mmHg .mL. K / 221850 K.mmHg

V₂ =  511.59mL

Answer:

Partial pressure of oxygen = 190 mmHg

Explanation:

From the question;

Mixture contains only nitrogen and oxygen

Total pressure of the mixture = 480 mmHg

Partial pressure of nitrogen = 290 mmHg

Dalton's law states that the pressure of a system is as a result of the sum of the partial pressures of the individual components of the mixture. This means that in this mixture;

Pressure of mixture = Partial Pressure of Nitrogen + Partial Pressure of Oxygen

480 = 290 + Partial pressure of oxygen

Partial pressure of oxygen = 480 - 290

Partial pressure of oxygen = 190 mmHg

The energy of a photon that would move an electron from level 2 to level 5 : B. 4.8 eV

The electron energy at the nth shell can be formulated:

Rh = constant 2.179.10⁻¹⁸ J

So the electron transfer energy (ΔE)

ΔE = E final- E initial

energy at n=2(level 2) = -5.3 eV

energy at n=5(level 5) = -0.5 eV

So the energy absorbed :

[tex]\tt \Delta E=-0.5-(-5.3)=-0.5+5.3=4.8`eV[/tex]

The energy required to move an electron from level 2 to level 5 is 4.8 eV.

According to the Bohr model of the atom, an electron moves from a lower to a higher energy level when it absorbs energy. The same energy is released when the atom returns to ground state.

When an electron from level 2 to level 5, the energy of the photon required is;

ΔE = E5 - E2 = -0.5eV - (-5.3eV)

ΔE = 4.8eV

Learn more: https://brainly.com/question/865531?

Answer:

metallic bond

because this diagram is electron gas theory which shows metallic bond

Answer:

Image result for Where do karst regions occur?

Karsts are found in widely scattered sections of the world, including the Causses of France; the Kwangsi area of China; the Yucatán Peninsula; and the Middle West, Kentucky, and Florida in the United States.

Explanation:

Answer:

Middle West Kentucky.

Explanation:

Karst are found in widely scatter sections of the world.

The statements correctly describes the function of cell parts is the mitochondria are the power plants of the cell. Therefore, option C is correct.

The cytoplasm of a cell contains tiny structures (fluid that surrounds the cell nucleus). The majority of a cell's energy is produced by mitochondria, which also have unique genetic material distinct from that present in the nucleus.

Oxidative phosphorylation, which produces ATP using the energy generated during the oxidation of the food we ingest, is the traditional function of mitochondria.

For the majority of biochemical and physiological activities, including growth, mobility, and equilibrium, ATP is used as the main energy source in turn.

Thus, option C is correct.

To learn more about the mitochondria, follow the link;

https://brainly.com/question/10688306

#SPJ6

Answer:

Seeds need oxygen so that they can produce energy for germination and growth. The embryo gets energy by breaking down its food stores. Like all organisms, this is done through a process known as aerobic respiration. —a series of reactions where energy is released from glucose, using oxygen.

Answer:

Such a relationship between atomic number and atomic radius is a direct correlation. an inverse correlation. According to Coulomb's Law, as the atomic number increases within a series of atoms, the nuclear attraction for electrons will also increase, thus pulling the electron(s) closer to the nucleus.

Explanation:

To prepare 250 ml 0.25 M hydrogen peroxide, 10.63 ml of 20g/100 ml hydrogen peroxide has been taken and made up the volume to 250 ml.

The dilution of the sample can be prepared with the help of expression:

M1V1 = M2V2

M1 = molarity of the concentrated solution

V1 = volume of concentrated solution

M2 =  molarity of diluted solution

V2 = volume of diluted solution.

The molarity of concentrated solution has been:

Molarity = [tex]\rm \dfrac{weight}{molecular\;weight}\;\times\;\dfrac{1000}{Volume\;(ml)}[/tex]

The 20g/100 ml Hydrogen peroxide has molarity:

Molarity = [tex]\rm \dfrac{20}{34.0147}\;\times\;\dfrac{1000}{100}[/tex]

Molarity of Hydrogen peroxide = 5.879 M

The volume of 5.879 M hydrogen peroxide is required to prepare 0.25 M hydrogen peroxide has been:

Volume of Hydrogen peroxide (20g/100 ml) [tex]\times[/tex] 5.879 = 250 ml [tex]\times[/tex] 0.25 M

Volume of Hydrogen peroxide (20g/100 ml) = 10.63 ml.

To prepare 250 ml 0.25 M hydrogen peroxide, 10.63 ml of 20g/100 ml hydrogen peroxide has been taken and made up the volume to 250 ml.

For more information about the preparation of solution, refer to the link:

https://brainly.com/question/24159217

Answer:

C.it contradicted the heinsberg uncertainly principle

Answer:

C.it contradicted the heinsberg uncertainly principle

Explanation:

dicing potatoes, because the molecules are separated but remain the same substance

Answer:

For the people wondering, yes, dicing potatoes is the correct answer. Because a new substance has not formed.

Answer:

Pure covalent bonds exist between two atoms with the same electronegativities. A pure covalent bond has no ionic character at all. Diatomic elements are good examples of pure covalent bonds where the electrons are evenly shared between both nuclei.

Explanation:

Hope this helped!

Answer:

someone is in my mind and it is telling me 5.55m

Explanation:

Answer:

4 mL

Explanation:

4mL is 5% of 80mL. Therefore my answer is right.

Answer:

0.53 atm

Explanation:

First we have to obtain the number of moles of each gas.

Number of moles of Ne = 10g/20g/mol = 0.5 moles

Number of moles of Ar = 10 g/40 g/mol = 0.25 moles

Total number of moles = 0.5 moles + 0.25 moles = 0.75 moles

Partial pressure of Ar = number of moles of Ar/Total number of moles * total pressure

Partial pressure of Ar = 0.25 moles/ 0.75 moles * 1.60 atm

Partial pressure of Ar = 0.53 atm

Answer:

Fire, Air, Water.

Explanation:

Matter is anything that has mass and occupies space. However, not all form of matter are visible. Air is an example of invisible matter.

Note, electricity does not have mass or does not occupy space. Therefore, electricity is not a matter.

Answer:

Fire, Air, Water

Explanation:

Electricity is the of charged particles conducting medium. However, it is the electrons that are matter, not their movement.

Matter is anything that has mass and occupies space. The flame itself is a mixture of gases and so is matter. The light and heat produced are energy not matter.

Like solids and liquids, air is matter. It has a weight and it takes up space.

Water is a liquid and liquids are one of the four fundamental states of matter.

Answer:0.29

Explanation:

To determine the pressure of the hutch on the floor, we must first calculate the area of the base of the hutch.

A=lw=(15in.)(34in.)=510in.2

We can now use the formula to calculate pressure.

P=FAP=150lbs510in.2P≈0.294lbin.2

Rounding to two significant figures, the pressure exerted by the hutch on the floor is 0.29lbin.2.

Explanation:

Generally, temperature increases the rate of any chemical reaction considerably.

In a dissolution process, the solute is solvated in the solvent. Solutes are usually the solids or liquids being dissolved in the solution.