2- Bromo – 2 – methyl propane is :
(a) Primary alkyl halide
(b) Secondary alkyl Halide
(c) Tertiary alkyl amine
(d) Tertiary alkyl Halide

Answer:

Gunpowder was discovered somewhat inadvertently by Chinese alchemists, who were trying to develop an elixir of immortality. If you're not aware, there are three primary components to gunpowder: saltpeter (potassium nitrate), sulfur, and charcoal. ... The use of sulfur by the Chinese is also ancient.

Explanation:

[tex] \large \text{Answer} \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ [/tex]

Boiling points,conductivity and colours contain only physical properties

The molality of the solution is 1.4 moles per kilogram (molal).

The molality of the solution is equal to the number of moles of sugar (solute) divided by the number of kilograms of water (solvent). Hence, the molality is determined below:

[tex]m = \frac{3.5\,mol}{2.5\,kg}[/tex]

[tex]m = 1.4\,\frac{mol}{kg}[/tex]

The molality of the solution is 1.4 moles per kilogram (molal).

We kindly invite to check this question on molality: https://brainly.com/question/4580605

Answer:

the mass of each gas

Explanation:

Two balloons hold two different gases. The gases are held at the same pressure, volume, and temperature. Which quantity can differ between

the two gases?(1 point)

the gas constant of each gas

the molar volume of each gas

the mass of each gas

Two balloons hold two different gases. The gases are held at the same pressure, volume, and temperature. Which quantity can differ between the two gases?(1 point) the gas constant of each gas the gas constant of each gas the molar volume of each gas the molar volume of each gas the mass of each gas the mass of each gas the number of moles of each gas

the number of moles of each gas

PV = nRT

The gases have the same P.V, T and n

R is constant AND SO constant for both

the only difference is the molar mass of the gas

for the same number of moles, the  balloons will have different weights depending on the gas  

so the answer is

the mass of each gas

Answer:

320 gm

Explanation:

4 Fe + 3 O2 ----> 2 Fe2O3 How many moles of iron(III) oxide, Fe2O3 , will be produced if 4 moles of iron, Fe, are consumed

for every 4 moles of Fe, 2 moles of Fe2O3 are produced.

Fe2O3 has a molar mass of (56 X 2) + (16 X 3) = 112 + 48 =160

160 X 2 =320 gm

Explanation:

Seafloor spreading and other tectonic activity processes are the result of mantle convection .Mantle conversion is the slow churning motion of Earth’s mantle convection carry heat from the lower mantle and core to lithosphere

Answer:

The cause of the color "white" in wine is because the grape's skin is removed before fermentation.

The cause of the color "red" in wine is because the grape's skin is still intact while fermentation

The mass of water that can be boiled by 1 g of gasoline by raising its temperature from 20 °c to 100 °c is  17.6 g.

Now, we know that energy can not be created nor destroyed but it can be converted from one form to another.

The heat produced by the gasoline is equal to the heat gained by water. Mathematically;

1g ×  45 × 10^3 = [1 g × 4.18  × (100 - 20) + 2540m]

45 × 10^3 = 334.4 + 2540m

45 × 10^3 - 334.4 =  2540m

m =  45 × 10^3 - 334.4 /2540

m = 17.6 g

The mass of water that can be boiled by 1 g of gasoline by raising its temperature from 20 °c to 100 °c is 17.6 g.

Learn more: https://brainly.com/question/6111443

Answer:

Electrical Bonding Investigation Data Quick Check

Explanation:

B. Heat energy is added to the substance, weakening the electrica attraction between molecules.

C. Both the melting point and boiling point are lower

C. The lone pairs of electrons in the oxygen atom causes the molecule to be bent; the oxygen atom has a particle negative charge, while the hydrogen atom have particle positive charges

D. Phase change

C. At each plateau

Answer:

Nitrogen

Explanation:

Pure sugar is sucrose C12H22011

Answer:

Carbon dioxide, when present in sufficient amounts, will bind with water to form carbonic acid, which is capable of dissociating into bicarbonate and hydrogen ions.

Explanation:

With the help of carbonic anhydrase which further catalyzes the reaction to convert carbonic acid back into carbon dioxide and water. The carbon dioxide is then expelled from the lungs.

The final temperature of the cup may be less than accurate thereby affecting the entire results of the experiment carried out using the cup.

A styrofoam cup is an insulated material. A styrofoam cup prevents heat gain or looses from the cup. Heat is gained by the water inside the styrofoam cup. The cup prevents exchange of energy with the environment.

When water is lost from the styrofoam cup, the final temperature of the cup may be less than accurate thereby affecting the entire results of the experiment carried out using the cup.

Learn more:  https://brainly.com/question/8646601

Answer:

alpha decay or particle

Explanation:

Answer:

2.5l

Explanation:

They higher the temprature the higher the volume

First organisms to convert solar energy to chemical energy were the organisms which are called as cyanobacteria.

Energy which is stored in the chemical bonds of chemical compounds is called chemical energy.Chemical energy is released during the occurrence of chemical reaction.Reactions wherein energy is given out in the form of heat is called exothermic reactions.

Chemical energy can be converted to other forms of energy like electrical energy during the process of electrolysis and to thermal energy as in the case of thermal engines.

It can also be converted to kinetic energy during explosions . It is stored in batteries, coal, biomass, food, vehicle air bags,etc.During digestion chemical energy is converted to mechanical and thermal energy.

Learn more about chemical energy,here:

https://brainly.com/question/1371184

#SPJ2

[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪  {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]

Here's the procedure to Crack an egg ~

Step 1 ~

Step 2 ~

Step 3 ~

Answer:

KBr final solution:

V = 250mL --> 0.25L

Concentration/Molarity = 1.5 mol/L

To find the amount of moles of KBr here, just multiply the volume by the concentration (0.25 x 1.5 = 0.375 mol)

So the amount of moles for KBr is 0.375 mol. Now we know that the mass divided by the molar mass (the atomic mass values of K and Br in the periodic table added together) would give us the amount of moles aswell.

n = moles

m = mass

M = molar mass

n = m/M

so if we rearrange this equation to find mass, we would get:

m = n x M

Molar mass for KBr: (39.09) of K + (79.90) of Br = 118.99

m = 0.375 mol    x    118.99

m = 44.62g

Therefore 44.62g of KBr is needed to make 250mL of a 1.5 M KBr solution.

Answer:

C

Explanation:

Answer:

wait what?

Explanation:

brainliest pls

Answer:

A carboxyl group (COOH) is a functional group consisting of a carbonyl group (C=O) with a hydroxyl group (O-H) attached to the same carbon atom. Carboxyl groups have the formula -C(=O)OH, usually written as -COOH or CO2H.

Since intermolecular forces is stronger in a solid than a liquid, then NaCl has stronger intermolecular forces than H2O.

Intermolecular forces exists between molecules of the same or different kinds. Water has a dipole moment hence it can interact effectively with the ions in NaCl. This leads to an ion dipole interaction that results in the dissolution of NaCl in H2O.

NaCl is a solid and water is a liquid. Since intermolecular forces is stronger in a solid than a liquid, then NaCl has stronger intermolecular forces than H2O.

Hence, the best argument that compares the intermolecular interactions in water and NaCl is; salt is a solid and water is a liquid, so water has stronger intramolecular forces.

Learn more: https://brainly.com/question/12108425

Answer:The number of BH+ Molecules will increase , and the number of water molecules will decrease

Explanation:

The number of OH- ions will increase, and the number of BH molecules will decrease.

Option (3) is correct.

In the given base solution equation, B + H₂O = BH⁺ + OH⁻, when the strength of the base is increased, more B molecules will react with water to form BH⁺ and OH⁻ ions. This happens because a stronger base donates more OH⁻ ions into the solution, increasing its concentration.

As the base becomes stronger, more B molecules will participate in the reaction, forming fewer BH⁺ molecules since they are being converted to BH⁺ ions. Simultaneously, the increased concentration of OH⁻ ions means that the number of OH⁻ ions in the solution will increase.

Overall, the change in the number of particles can be summarized as follows:

The number of BH molecules will decrease.

The number of OH⁻ ions will increase.

This change reflects the increase in the concentration of OH⁻ ions, which is a characteristic of a stronger base solution.

To learn more about OH⁻ ions  here

https://brainly.com/question/30456233

#SPJ3

Explanation:

what properties are you talking about?

Answer:

{B}

Explanation:

Answer:

When gathering data, whether qualitative or quantitative, we can use several tools, such as: surveys, focus groups, interviews, and questionnaires. To help organize data, we can use charts and graphs to help visualize what's going on, such as bar graphs, frequency charts, picture graphs, and line graphs.

If your hypothesis is supported, you might think of ways to refine your hypothesis and test those. Either way, the process of experimentation often leads to whole new questions to explore. The possibilities are infinite, and the search for knowledge is never-ending.

The scientific method is a process that helps answer questions based on observations, carefully planned experiments and deductive reasoning. All scientific inquiry begins with the identification of a problem or question to be answered based on observation.

If the initial hypothesis is not supported, you can go back to the drawing board and hypothesize a new answer to the question and a new way to test it. ... Either way, the process of experimentation often leads to whole new questions to explore. The possibilities are infinite, and the search for knowledge is never-ending.

brainlest

Explanation:

Considering the definition of ideal gas law, the volume of the Krypton gas is 3840 mL.

An ideal gas is a theoretical gas that is considered to be composed of point particles that move randomly and do not interact with each other. Gases in general are ideal when they are at high temperatures and low pressures.

The pressure, P, the temperature, T, and the volume, V, of an ideal gas, are related by a simple formula called the ideal gas law:  

P×V = n×R×T

where P is the gas pressure, V is the volume that occupies, T is its temperature, R is the ideal gas constant, and n is the number of moles of the gas. The universal constant of ideal gases R has the same value for all gaseous substances.

Now, taking into account this law, and isolating the pressure variable (P), you get:

[tex]V=\frac{nxRxT}{P}[/tex]

In this case, you know:

Replacing in the ideal gas law:

[tex]V=\frac{0.119 molesx0.082 \frac{atmL}{moleK}x298K}{0.756579 atm}[/tex]

Solving:

V=3.84 L= 3840 mL (being 1 L=1000 mL)

Finally, the volume of the Krypton gas is 3840 mL.

Learn more:

https://brainly.com/question/4147359?referrer=searchResults

Answer:

A.Yes

Explanation:

1. The energy associated with an electromagnetic radiation of [tex]6.34 \times 10^{15} \;Hertz[/tex] is equal to [tex]4.2 \times 10^{-18}\;Joules[/tex].

2. The frequency of one of the bands of the sodium emission spectrum is [tex]5.13 \times 10^{14}\;Hertz[/tex]

Given the following data:

Scientific data:

1. To determine the energy associated with an electromagnetic radiation of [tex]6.34 \times 10^{15} \;Hertz[/tex], we would apply Einstein's equation for photon energy:

Mathematically, Einstein's equation for photon energy is given by the formula:

[tex]E =hf[/tex]

Where:

Substituting the given parameters into the formula, we have;

[tex]E = 6.626 \times 10^{-34}\times 6.34 \times 10^{15} \\\\E = 4.2 \times 10^{-18}\;Joules[/tex]

2. To determine the frequency of one of the bands of the sodium emission spectrum:

Mathematically, the frequency of a wave is given by the formula:

[tex]Frequency = \frac{Speed}{wavelength} \\\\Frequency = \frac{3 \times 10^8}{5.85 \times 10^{-7}} \\\\Frequency =5.13 \times 10^{14}\;Hertz[/tex]

Read more: https://brainly.com/question/14593563