Answers
H_2S+O_2--->SO_2+H_2O
Balance it
2H_2S+3O_2--->2SO_2+2H_2OSo
Molar mass of oxygen=2(16)=32g/mol
Molar mass of SO_2=2(16)+32=32+32=64g/mol
Moles of oxygen:-
Given mass/Molar mass44.7/321.399molHere
3 mol of Oxygen produces 2 mol SO_21 mol of oxygen produces 2/3=0.6mol SO_2Moles of so_2
0.6(1.399)=0.84molMass of water
0.84(64)53.8gRelated Questions
A chemical engineer must calculate the maximum safe operating temperature of a high-pressure gas reaction vessel. The vessel is a stainless-steel cylinder that measures wide 22cm and 26.4 high. The maximum safe pressure inside the vessel has been measured to be 6.30mpa.
For a certain reaction, the vessel may contain up to .537kg of dinitrogen monoxide gas. Calculate the maximum safe operating temperature the engineer should recommend for this reaction. Write your answer in degrees Celsius. Be sure your answer has the correct number of significant digits.
Answers
The maximum safe operating temperature for this reaction is equal to 895°C.
Given the following data:
Width of cylinder = 22 cm.Height, h = 26.4 cm.Maximum safe pressure = 6.30mpa.Mass = 0.537 kg.Scientific data:
Ideal gas constant, R = 8.314 L-kPa/Kmol.Molar mass of of dinitrogen monoxide ([tex]N_2F_2[/tex]) gas = 66 g/mol.Radius, r = [tex]\frac{width}{2} =\frac{22}{2} =11\;cm[/tex]
How to calculate the maximum safe operating temperature.First of all, we would determine the volume of the stainless-steel cylinder by using this formula:
[tex]V=\pi r^2 h\\\\V = 3.142 \times 11^2 \times 26.4\\\\[/tex]
Volume, V = 10,036.81 [tex]cm^3[/tex].
In liters, we have:
Volume, V = 10.04 Liters.
Next, we would determine the number of moles of dinitrogen monoxide ([tex]N_2F_2[/tex]) gas:
[tex]Number \;of \;moles = \frac {mass}{molar\;mass}\\\\Number \;of \;moles = \frac {537}{66}[/tex]
Number of moles = 8.136 moles.
Now, we can solve for the maximum safe operating temperature by applying the ideal gas equation:
[tex]PV=nRT\\\\T=\frac{PV}{nR} \\\\T=\frac{6.30 \times 10^3 \times 10.04}{8.136 \times 8.314}\\\\T=\frac{60541.2}{67.6427}[/tex]
T = 895.02 ≈ 895°C.
Read more on temperature here: https://brainly.com/question/24769208
Explain how energy is conserved in combustion reactions.
Answers
Answer:
That’s because of the law of conservation of energy, which states that: Energy cannot be created or destroyed.
Explanation:
Energy may change form during a chemical reaction. For example, energy may change from chemical energy to heat energy when gas burns in a furnace. The exact amount of energy remains after the reaction as before.
what is the volume of
NH4 NO3(s) — N2O(g) + 2H2O(g)
Answers
Answer:
Explanation:
NH4NO3(s) N2O(g) + 2H2O(g) What is the total volume of gases produced at 546 K and 1.00 atm pressure when 240 g of ammonium nitrate undergoes the above decomposition reaction? A) 9 × 22.4 L B) 3 × 22.4 L C) 12 × 22.4 L D) 18 × 22.4 L E) 6 × 22.4 L
How do human population growth trends differ between developed nations and developing nations?
Answers
Answer:
Growing population
The worlds developing regions will see 1.2 billion people added, a 20.7% increase; while the population of developed countries will increase a mere 3.3% adding 41 million to the current 1.3 billion people.
1. List the actual volume of titrant needed to produce a color change for Sample A and Sample B. Answer: Volume of titrant needed to produce a color change for Sample A:\ ml Volume of titrant needed to produce a color change for Sample B: ml
Answers
Answer: B Hope this helps :)
One material property that is widely used and recognized is the strength of a material. But what does the word "strength" mean? "Strength" can have many meanings, so let us take a closer look at what is meant by the strength of a material. We will look at a very easy experiment that provides lots of information about the strength or the mechanical behavior of a material, called the tensile test.
The basic idea of a tensile test is to place a sample of a material between two fixtures called "grips" which clamp the material. The material has known dimensions, like length and cross-sectional area. We then begin to apply weight to the material gripped at one end while the other end is fixed. We keep increasing the weight (often called the load or force) while at the same time measuring the change in length of the sample.
Explanation:
Calculate the pOH for a solution that has a hydroxide ion, (OH-) concentration of 5.02 X 10-4 M.
Calculate the pH.
Note: the answers should have three significant figures
Answers
Answer:
Explanation:
Calculate the pOH for a solution that has a hydroxide ion, (OH-) concentration of 5.02 X 10-4 M.
Calculate the pH.
Note: the answers should have three significant figures
Why is an enzyme in a chemical reaction like a lock and key?
A. The active site and the substrate fit perfectly together, and when they do, they unlock the chemical reaction.
B. The non-reactive site and the substrate fit perfectly together, and when they do, they unlock the chemical reaction.
C. None of these
D. The nucleoid and Golgi Apparatus fit perfectly together, and when they do, they unlock the chemical reaction.
E. The active site and the cell membrane fit perfectly together, and when they do, they unlock the chemical reaction.
Answers
Answer:
A
Explanation:
the enzyme is substrate specifix coz of this trait
What is the most metallic character with low ionization energies
Answers
Answer:
Metals tend to lose electrons in chemical reactions, as indicated by their low ionization energies. Within a compound, metal atoms have relatively low attraction for electrons, as indicated by their low electronegativities.
explain chemical equilibrium
Answers
Answer:
chemical equilibrium, condition in the course of a reversible chemical reaction in which no net change in the amounts of reactants and products occurs. A reversible chemical reaction is one in which the products, as soon as they formed, react to produce the original reactants.
Explanation:
chemical equilibrium is the state in which both reactants and products are present in concentrations which have no further tendency to change with time, so that there is no observable change in the properties of the system.
Complete this example: A 0.67 molal solution was
made by dissolving glucose in water. The boiling
point of pure water is 100.00°C. The boiling point
constant for water is 0.51°C kg/mol.
on
the
Set up the problem.
• 4T2 = (0.51°C•kg/mole)(0.67 m)
of
• What is the 473 value?
vc
• What is the boiling point for the glucose
solution?
УРС
Answers
Answer:
A then C
Explanation:
Answer:
a,c
Explanation:
what are chemical reaction
Answers
Example:-
Burning of waxWe cannot pull back the reaction to get wax back .
Answer:
Explanation:
The permanent change in which a new substance is formed is called a chemical reaction.
For example:
i)Burning of wood
ii)Cooking rice
iii)Forming curd from milk
The burning of wood is a chemical reaction because it is a permanent change and it cannot be reversed. Once it is done, it is over it can't be done again. And in the case of example iii, the milk turns into curd by chemical reaction. A new substance i.e curd is formed from the milk.
Hope you understood!
According to Bohr's Model, which one is correct about a transition from n=2 to n=1 in a hydrogen atom?
Answers
When an electron moves from n = 2 to n = 1, it emits a photon of ultraviolet light.
What happen in transition from n= to n=1?During transition from n=2 to n=1 in a hydrogen atom, the electron emits energy in the form of photon. We know that when electron absorb energy, it moves from lower level to higher level and vice versa.
So we can conclude that when an electron moves from n = 2 to n = 1, it emits a photon of ultraviolet light.
Learn more about transition here: https://brainly.com/question/1101400
Which statement describes a digital signal?
Answers
Answer:
digital signal
Answer:
Its made of numbers
Explanation:
did the assignment, hope this helps :]
A 5.00 L flask at 25˚ C contains 0.200 mol of Cl2 . What is the pressure in the flask?
Answers
The pressure of a 5.00 L flask at 25˚ C that contains 0.200 mol of Cl2 is 0.98atm.
How to calculate pressure?The pressure of a gas can be calculated by using the following expression:
PV = nRT
Where;
P = pressureV = volumen = number of molesR = gas law constantT = temperatureP × 5 = 0.2 × 0.0821 × 298
5P = 4.893
P = 4.893 ÷ 5
P = 0.98atm
Therefore, the pressure of a 5.00 L flask at 25˚ C that contains 0.200 mol of Cl2 is 0.98atm.
Learn more about pressure at: https://brainly.com/question/356585
Answer:
Your answer would be:
0.98atm.
Explanation:
Have a great rest of your day
#TheWizzer
Calculate how many grams of oxygen form when 2.72 g of KCIOg reacts completely given the
following equation:
2 KCI03 (s)
- 2 KCI (s) + 302 (g)
Answers
1.06g
Please refer to the image attached.
You first find the number of moles (n) for KClO3 as you have been given the mass. So n = mass/Mr gives you the moles that is 0.022 mol
Next you use the ratio 2:3 as per the equation where it's 2KClO3 ---> 3O2 so you just cross multiply and get the moles for oxygen.
Now that you know the number of moles for oxygen, you can use the same moles equation that you used earlier to find the mass. mass=n×Mr and so you get the answer as 1.06g of oxygen.
What happens when the temperature of a gas is increased?
O A. The boiling point will increase,
O B. The collisions between molecules will decrease,
O C. The volume will increase,
D. The pressure will decrease,
Answers
How many R.P.'s is equivalent to 0.780 g of Na₂CO₂?
Answers
Answer:
pbo2+cl-=clo-+pb(oh)2
Explanation:
balance by ion electron
Remove all the tape pieces from part A, and throw them in the trash. Next, follow these steps to compare pieces of sticky tape that have different charges:
Tear off two pieces of tape that are about 15 cm (6 inches) long. Similar to part A, fold under a half inch of each piece to make the strips easier to pull off.
Stick one of the pieces onto the tabletop. Smooth the tape down.
Stick the second piece of tape onto the tape piece you just placed. Do not cover the tab of the first piece of tape.
Grasp one tape tab in each hand. Carefully pull both pieces off the table and separate them. Turn the non-sticky sides of the tape toward each other.
What do you observe? If there’s an interaction, explain whether the tape pieces attract or repel each other. (ANSWER ASAP)
Answers
The interaction which will occur when the non sticky tape pieces are turned towards each other is attraction.
What is Attraction?This involves the coming together of objects as a result of a force. When non-sticky sides of the tape are brought towards each other attraction takes place due to the sticky content.
This however wears off after some time thereby making it the most appropriate choice.
Read more about Attraction here https://brainly.com/question/16033085
Gives 2 reaction in which benzene ring is retained and 2 reaction in which benzene ring is not retained
Answers
Hey dear,
Benzene is a 6-C cyclic structure with alternate double bonds.
● Reactions -
1) Benzene to cyclohexane -
Benzene can be reduced to cyclohexane with
the help of Ni/H2. C6H6 + 3H2 --> C6H12
All 3 double bonds in ring are reduced here.
2) Benzene to benzoquinone - Benzene can be oxidized to benzoquinone with
the help of acidic K2Cr207. C6H6 +3[O] --> C6H4O2 + H2O
Only 1 double bond is lost in this reaction.
Hope this helps you.
A chemistry assignment has a student conduct a single replacement reaction by adding 7.5g of sodium metal to 20.0g of aluminum chloride. How much aluminum in moles would precipitate out as a result of the reaction
Answers
Answer: 0.109 mol
Explanation:
Balanced chemical equation:
3 Na(s) + AlCl3(aq) --> 3 NaCl(aq) + Al(s)
3 moles of sodium metal react with 1 mole of aluminum chloride to produce 3 moles of aluminum chloride and 1 mole of solid aluminum
Molar mass of Na = 22.99 g/mol
Mass(Na) = 7.5 g
Find number of moles of Na:
n = mass of Na/molar mass of Na
=(7.5 g)/(22.99 g/mol)
= 0.3262 mol
Molar mass of AlCl3,
MM = 1*MM(Al) + 3*MM(Cl)
= 1*26.98 + 3*35.45
= 133.33 g/mol
Mass(AlCl3) = 20.0 g
Find number of moles of AlCl3,
n = mass of AlCl3/molar mass of AlCl3
=(20 g)/(1.333*10^2 g/mol)
= 0.15 mol
Balanced chemical equation is:
3 Na + AlCl3 ---> Al + 3 NaCl
3 mol of Na reacts with 1 mol of AlCl3
for 0.3262 mol of Na, 0.1087 mol of AlCl3 is required
But we have 0.15 mol of AlCl3
So, Na is the limiting reagent and we will use it in our further calculations.
According to balanced equation:
mol of Al formed = (1/3) * moles of Na
= (1/3)*0.3262
= 0.1087 mol
Answer: 0.109 mol of aluminum will precipitate out as a result of the reaction
How many grams does 5 helium atoms weigh?
Answers
Answer:
4.002602
Explanation:
the average that reflects the typical ratio of natural abundances of its isotopes.
The weight of 5 helium atoms in grams is 20.01301 grams.
What are atoms?Atoms are defined as the smallest unit into which matter can divided without the release of electrically charged particles.
It is also defined as a building block of matter and were discovered after big bang theory. It is a fundamental piece of matter.
The weight of 1 helium atom = 4.002602 g
So, the weight of 5 helium atom = 4.002602 x 5
= 20.01301 g
Thus, the weight of 5 helium atoms in grams is 20.01301 grams.
To learn more about atoms, refer to the link below:
https://brainly.com/question/1566330
#SPJ2
XeF6
formula mass =
molar mass =
Answers
Answer:
Xenon hexafluoride's molar mass is about 245.28 g/mol
Formula mass is about 245.28 u.
Explanation:
So we want to find the formula mass of the XeF6 and there is a special formula for that.
You have to multiply the number of each element in XeF6 by the element's atomic mass.
The atomic mass of Xe is 131.293, and F's atomic mass is multiplied by 6, due to the 6 at the bottom. F's atomic mass is 18.998403, so we multiply the atomic number by 6, which would equal 113.990418. Round if you want, but it would equal mostly the same thing. Add it up to get ≈245.28, which is the same thing.
Therefore the formula mass of XeF6 is 245.28 u.
Name the Covalent compound NH3O2
Answers
The name of the covalent compound NH3 O2 is dihydroxylamine.
Naming compoundsAccording to the task content;
It follows that the given covalent compound whose name is to be written is; NH3O2.On this note, the compound possesses 2 oxygen atoms, 3 Hydrogen atoms and 1 Nitrogen atom. Hence, the name of the covalent compound is Dihydroxylamine.
Read more on naming compounds;
https://brainly.com/question/2035169
Which one of these are a physical property? Select all that apply. a. Luster (shininess) Conducts Electricity Reactivity with water d. Temperature b. 0 0
Answers
A reaction rate increases by a factor of 655 in the presence of a catalyst at 37°C. The activation energy of the original pathway is 106 kJ/mol. What is the activation energy of the new pathway, all other factors being equal? Group of answer choices 89.3 kJ/mol 16,600 kJ/mol 89.3 J/mol 16,600 J/mol
Answers
For a reaction rate that increases by a factor of 655 in the presence of a catalyst at 37°C, the activation energy of the new pathway is mathematically given as
Ea2=89.28JKoule/mol
What is the activation energy of the new pathway, all other factors being equal?Generally, the equation for the rate constant is mathematically given as
K=Ae^{Ea1/Rt}
Therefore
[tex]\frac{1}{655}=\frac{1}{8.31*3.10}(Ea2-105000)[/tex]
Ea2=89286.083Joule/mol
In conclusion, the activation energy
Ea2=89.28JKoule/mol
Read more about Energy
https://brainly.com/question/13439286
23.4 grams of Al2(SO3)3 is yielded through a chemical reaction. How many moles is this?
Answers
Answer:
.0796 mole
Explanation:
Al2 (SO3)3 add the molecular weights
2 * Al = 2 * 26.982 +
3 * S = 3 * 32.06 +
9 * O = 6 * 15.999 = 294.135 gm per mole
Now... you have 23.4 grams of this substance
23.4/294.135 = .0796 mole
EDITED !
2. A body was discovered in the woods. The man has been missing for two days. The
average temperature the previous 48 hours was 50° fahrenheit. When the body was
discovered, it was at peak rigor.
Answers
The man has been missing for two days. The average temperature the previous 48 hours was 50° fahrenheit. 12-24 hours is the time. body was discovered.
Time is the ongoing progression of existence and things that happen in what seems to be an irrevocable order from the past, present, and forward into the future. It is a quantity that is a part of several measurements that are used to compare the length of events or the gaps between them.
To compare how long they last, to order events, and to measure how quickly things change in the real world or in our conscious experience. Along with the three spatial dimensions, time is frequently referred to as an a fourth dimension. A body was discovered in the woods. The man has been missing for two days. The average temperature the previous 48 hours was 50° fahrenheit. 12-24 hours, body was discovered.
To know more about time, here:
https://brainly.com/question/29253427
#SPJ1
If 0.380 mol of barium nitrate is allowed to react with an excess of phosphoric acid, how many moles of barium phosphate could be formed?
Ba (NO3)2+ H3PO4 → Ba3(PO4)2+ HNO3
Answers
If 0.380 mol of barium nitrate is allowed to react with an excess of phosphoric acid, 0.127 moles of barium phosphate could be formed.
How to calculate number of moles?The number of moles of a compound can be calculated stoichiometrically as follows:
Based on this question, the following chemical equation is given:
Ba (NO3)2+ H3PO4 → Ba3(PO4)2+ HNO3
The balanced equation is as follows:
3Ba(NO3)2 + 2H3PO4 → Ba3(PO4)2 + 6HNO3
3 moles of barium nitrate produces 1 mole of barium phosphate
Therefore, 0.380 moles of barium nitrate will produce 0.380/3 = 0.127moles of barium phosphate.
Learn more about stoichiometry at: https://brainly.com/question/9743981
If 30 grams of KCl is dissolved at 10°C, how many additional grams would be needed to make the solution saturated at 60°C? * Captionless Image 45g 20g 15g 75g
Answers
If 30 grams of KCl is dissolved at 10°C, 14 g of KCl should be added to make a saturated solution at 60 °C.
What is a saturated solution?A saturated solution is a solution in which there is so much solute that if there was any more, it would not dissolve. Its concentration is the same as the solubility at that temperature.
Step 1. Calculate the mass of water.At 10 °C, the solubility is 31.2 g KCl/100 g H₂O.
30 g KCl × 100 g H₂O/31.2 g KCl = 96 g H₂O
Step 2. Calculate the mass of KCl required to prepare a saturated solution at 60 °C.At 60 °C, the solubility is 45.8 g KCl/100 g H₂O.
96 g H₂O × 45.8 g KCl/100 g H₂O = 44 g KCl
Step 3. Calculate the mass of KCl that must be added.44 g - 30 g = 14 g
If 30 grams of KCl is dissolved at 10°C, 14 g of KCl should be added to make a saturated solution at 60 °C.
Learn more about saturated solutions here: https://brainly.com/question/24564260
(113) Fe, Co, and Ni are in a category of metals best known as
(A) Transition metals
(B) Alkali metals
(C) Rare metals
(D)Main group metals
(
Answers
Answer:
A
Explanation:
iron, cobalt and nickel are all transition metals