10. Look at the graphs below. The graph on the left is the pre-image and the graph on the right
is the image. Using a scale factor, what are the coordinates of H'.
شے کے مر 1 2
765432
-1
-2
5
3
2
H
X
5
4
3
2
-1
-2
H
Y

The distribution indicates that the most likely outcome of a single draw is to obtain a non-green ball (either red or blue), with a probability of approximately 0.727.

The distribution for the random variable x equals the number of green balls obtained with a single draw can be described as a discrete probability distribution. Since there are a total of 150 balls in the bucket and 41 of them are green, the probability of obtaining a green ball on a single draw is 41/150 or approximately 0.273. Therefore, the probability mass function for this distribution can be written as follows:

P(X = 0) = 109/150 or approximately 0.727
P(X = 1) = 41/150 or approximately 0.273
P(X > 1) = 0

This distribution indicates that the most likely outcome of a single draw is to obtain a non-green ball (either red or blue), with a probability of approximately 0.727. However, there is still a significant chance of obtaining a green ball on a single draw, with a probability of approximately 0.273.

To learn more about probability, click here:

brainly.com/question/30034780

#SPJ11

Otherwise, we would fail to reject the null hypothesis and conclude that there is not enough evidence to support the alternative hypothesis.

The null hypothesis (H0) is the statement being tested, which assumes that there is no significant difference between the observed and expected results. In this case, the null hypothesis would be that the proportion of patients who stop smoking after receiving sustained care is equal to 80%, or:

H0: p = 0.8

The alternative hypothesis (Ha) is the opposite of the null hypothesis and represents the claim being tested. In this case, the alternative hypothesis would be that the proportion of patients who stop smoking after receiving sustained care is not equal to 80%, or:

Ha: p ≠ 0.8

The significance level, alpha, is the probability of rejecting the null hypothesis when it is actually true. A significance level of 0.10 means that there is a 10% chance of rejecting the null hypothesis even if it is true. To test this hypothesis, we would use a one-tailed or two-tailed z-test for the population proportion, depending on whether the alternative hypothesis is one-sided or two-sided. In this case, the alternative hypothesis is two-sided, so we would use a two-tailed z-test.

To perform the test, we would calculate the test statistic, which is the number of standard errors away from the null hypothesis value that the sample proportion is. We would then compare this test statistic to the critical value from the standard normal distribution at the chosen significance level, or use a p-value to determine the probability of obtaining a test statistic as extreme or more extreme than the observed value, assuming the null hypothesis is true. If the test statistic falls in the rejection region, we would reject the null hypothesis and conclude that there is evidence to support the alternative hypothesis. Otherwise, we would fail to reject the null hypothesis and conclude that there is not enough evidence to support the alternative hypothesis.

To learn more about alternative visit:

https://brainly.com/question/30232256

#SPJ11

Answer:

B

Step by step solution:

A is an obtuse triangle

B is an acute triangle

C is a scalene triangle

D is an equilateral triangle.

The probability of getting an odd number or a multiple of 4 is 3/4.

Given that, a twelve-sided die has sides numbered 1 through 12. we need to find the probability of getting a number odd or a multiple of 4.

Probability = favorable outcomes / total number of outcomes

For odd numbers =

Favorable outcomes = 1, 3, 5, 7, 9, 11 = 6

P(odd number) = 6/12 = 1/2

For multiple of 4 =

Favorable outcomes = 4, 8, 12 = 3

P(multiple of 4) = 3/12 = 1/4

P(odd or a multiple of 4) = 1/2 + 1/4 = 3/4

Hence, the probability of getting an odd number or a multiple of 4 is 3/4.

Learn more about probability, click;

https://brainly.com/question/30034780

#SPJ1

(a) To show that the set of all symmetric matrices is a subspace of m6(r), we need to verify that it satisfies the three conditions for a subspace:

1. It contains the zero vector: The zero matrix is symmetric, so it is in the set.
2. It is closed under addition: If A and B are symmetric matrices, then A + B is also symmetric because (A + B)^T = A^T + B^T = A + B.
3. It is closed under scalar multiplication: If A is a symmetric matrix and c is a scalar, then cA is also symmetric because (cA)^T = cA^T = cA.

Therefore, the set of all symmetric matrices is a subspace of m6(r).

(b) To show that the set of all diagonal matrices is a subspace of m6(r), we again need to verify the three conditions:
1. It contains the zero vector: The zero matrix is diagonal, so it is in the set.
2. It is closed under addition: If A and B are diagonal matrices, then A + B is also diagonal because the sum of two diagonal entries is still a diagonal entry.
3. It is closed under scalar multiplication: If A is a diagonal matrix and c is a scalar, then cA is also diagonal because each diagonal entry is multiplied by c.

Therefore, the set of all diagonal matrices is a subspace of m6(r).

To learn more about Diagonal matrix - brainly.com/question/28202651

#SPJ11

The simplified form of the expression is [tex]7x^5 - 3x^4 - x^3 - x^2 + 4x.[/tex]

The given expression is a polynomial expression, which can be simplified by combining the like terms. The like terms have the same variable and the same exponent. The given expression can be rearranged and combined as follows:

To simplify the given expression, we need to combine the like terms.

Starting with the x^5 term, we see that there is only one term with [tex]x^5[/tex]which is [tex]7x^5.[/tex]

Moving on to the[tex]x^4[/tex]terms, we have two terms with[tex]x^4,[/tex] namely [tex]3x^4[/tex]and [tex]-3x^4[/tex], which add up to 0. Therefore, we can eliminate the[tex]x^4 t[/tex]erms from the expression.

[tex]7x^5 + 2x^3 - 5x^2 + 4x^2 + 6x - 2x - 3x^4 - 3x^3[/tex]

[tex]= 7x^5 - 3x^4 + 2x^3 - 3x^3 - 5x^2 + 4x^2 + 6x - 2x[/tex] (rearranging the terms)

[tex]= 7x^5 - 3x^4 - x^3 - x^2 + 4x[/tex] (combining the like terms)

Therefore, the simplified form of the expression is [tex]7x^5 - 3x^4 - x^3 - x^2 + 4x.[/tex]

Learn more about expression ,

https://brainly.com/question/14083225

#SPJ4

As per the given values, the width of the city block is 1/20 mile.

Total distance travelled by Bijan = 8 miles

Number of rounds taken by Bijan = 20

As per the question,

the length of the block = 3/20 miles and the width of the block = w

Calculating the perimeter -

Perimeter = 2(3/20 + w)

= 3/10 + 2w

Therefore,

Bijan will cover a distance of 3/10 + 2w miles in one round

In 20 rounds he will cover  the distance of -

= 20 x (3/10 + 2w)

= 20(3/10 + 2w) miles

According to the question,

= 20(3/10 + 2w) = 8

2w = 8/20 - 3/10

w = 2/40

w = 1/20

Read more about width on:

https://brainly.com/question/25292087

#SPJ4

In the above isosceles trapezoid,

Since R is the midpoint of HN, HR = RN. Similarly, since T is the midpoint of KJ, KT = TJ.

Let's use these properties to write expressions for HJ and NK in terms of x:

HJ = 5x + 9

NK = 3x - 2

Since NKJH is an isosceles trapezoid, we know that HJ = NK + 2RT. Substituting the expressions we found earlier, we get:

5x + 9 = (3x - 2) + 2(3x + 6)

Simplifying this equation gives:

5x + 9 = 9x + 10

Subtracting 5x from both sides gives:

4 = 4x

Dividing both sides by 4 gives:

x = 1

Now that we know x, we can find the values of HJ, NK, and RT:

HJ = 5x + 9 = 14 cm

NK = 3x - 2 = 1 cm

RT = 3x + 6 = 9 cm

Learn more about isosceles trapezoid at:

brainly.com/question/2516570

#SPJ4

The  p-value (0.031) is less than the significance level (0.05), we reject the null hypothesis.

To determine whether the automobile insurance company has an average insurance payout for all their customers that is greater than $500 per insurance claim, we can conduct a hypothesis test.

Let's define the following:

- Null hypothesis (H0): The average insurance payout per claim for all customers of the insurance company is $500 or less.
- Alternative hypothesis (Ha): The average insurance payout per claim for all customers of the insurance company is greater than $500.

We can set a significance level for the test, which is the probability of rejecting the null hypothesis when it is actually true. Let's set a significance level of 5% (0.05).

Next, we need to calculate the test statistic, which is the number of standard deviations that the sample mean is from the hypothesized population mean. The test statistic for a one-sample t-test is:

t = (XX  - μ) / (s / √n)

Where:
- X  is the sample mean ($579.80)
- μ is the hypothesized population mean ($500)
- s is the sample standard deviation ($751.30)
- n is the sample size (18)

Substituting the values, we get:

t = (579.80 - 500) / (751.30 / √18)
t = 2.02

We can then find the p-value, which is the probability of getting a test statistic as extreme as the one we calculated, assuming the null hypothesis is true. We can use a t-distribution table or a statistical software to find the p-value. For a one-tailed test with 17 degrees of freedom (n-1), the p-value is approximately 0.031.

Since the p-value (0.031) is less than the significance level (0.05), we reject the null hypothesis. We can conclude that there is sufficient evidence to suggest that the average insurance payout per claim for all customers of the insurance company is greater than $500.

Visit to know more about Null hypothesis:-

brainly.com/question/4436370

#SPJ11

The number of wheels in the 8 tricycles are 24.

The given equation is w=3×t.

Where, w is total number of wheels and t is number of tricycles.

Here, t=8

Substitute t=8 in w=3×t, we get

w=3×8

w=24 wheels

Therefore, the number of wheels in the 8 tricycles are 24.

To learn more about an equation visit:

https://brainly.com/question/14686792.

#SPJ1

answer

56

explain

because I just don't

By following the steps given below, you can use the bisection method to find the roots of the function f(x) + 1 = 0.

To use the bisection method to find the roots of the function f(x) + 1 = 0, follow these steps:

1. Rewrite the function: Since f(x) + 1 = 0, we can rewrite it as f(x) = -1.
2. Choose an interval: Select an interval [a, b] where f(a) and f(b) have opposite signs. This ensures that there is at least one root within the interval.
3. Calculate the midpoint: Find the midpoint c of the interval [a, b] using the formula c = (a + b) / 2.
4. Evaluate f(c): Determine the value of f(c).
5. Update the interval: If f(c) = -1, then c is the root. If f(c) has the same sign as f(a), replace a with c. If f(c) has the same sign as f(b), replace b with c.
6. Check for convergence: If the difference between a and b is less than a predefined tolerance or the maximum number of iterations has been reached, stop the process. Otherwise, go back to step 3.

Learn more about the bisection method: https://brainly.com/question/28138570

#SPJ11

Answer:

146in2

Step-by-step explanation:

i dont like explaining but im in the test to

Answer:

The measure of angle B is 80°. B is the correct answer.

Answer:

B. mB = 80°

Step-by-step explanation:

Supplementary angles add to 180 degrees

100 +x = 180

x = 180-100

x = 80 degrees

We need to sum at least the first 10 terms of the series to be sure that the remainder is less than 0.0001 in magnitude

We can use the Alternating Series Estimation Theorem to estimate the remainder Rn of the series:

|Rn| ≤ |an+1|

where an+1 is the first neglected term of the series. For this series, the nth term is [tex](-1)^(n+1)/(n^4)[/tex], so the (n+1)th term is [tex](-1)^n+2/((n+1)^4)[/tex].

Thus, we have:

|Rn| ≤ [tex]|(-1)^(n+2)/((n+1)^4)|[/tex]

We want to find the smallest value of n such that |Rn| < 0.0001. This means we need to solve the inequality:

[tex]|(-1)^(n+2)/((n+1)^4)|[/tex] < 0.0001

Simplifying, we get:

[tex]1/((n+1)^4)[/tex] < 0.0001

Taking the fourth root of both sides, we get:

1/(n+1) < 0.1

Solving for n, we get:

n > 9

Therefore, we need to sum at least the first 10 terms of the series to be sure that the remainder is less than 0.0001 in magnitude.

To know more about Alternating Series Estimation Theorem refer here:

https://brainly.com/question/29767476

#SPJ11

The probability that a randomly selected person has an IQ above 115 is 0.1587.

Someone would need to have an IQ score of at least 130.81 to get into MENSA.

We can expect the middle 95% of the population to have IQ scores between 70.6 and 129.4.

a) Since the IQ test scores follow a normal distribution, the median IQ test score is also equal to the mean IQ test score, which is 100.

b) To find the probability that a randomly selected person has an IQ above 115, we need to calculate the z-score and use a standard normal table or calculator to find the corresponding probability. The z-score is calculated as:

z = (x - μ) / σ = (115 - 100) / 15 = 1

Using a standard normal table or calculator, we can find that the probability of a z-score of 1 or greater is approximately 0.1587. Therefore, the probability that a randomly selected person has an IQ above 115 is 0.1587.

c) To find the IQ score that someone would need to have in order to get into MENSA, we need to find the z-score that corresponds to the 98th percentile and then use the formula to solve for x:

z = invNorm(0.98) = 2.0537

x = μ + zσ = 100 + 2.0537(15) = 130.8055

Therefore, someone would need to have an IQ score of at least 130.81 to get into MENSA.

d) Using the method from problem 2, we need to find the z-scores that correspond to the middle 95% of the distribution. Since the normal distribution is symmetric, we can find the z-scores that correspond to the middle 2.5% and then use the formula to solve for x:

z = invNorm(0.025) = -1.96 and z = invNorm(0.975) = 1.96

x1 = μ + z1σ = 100 + (-1.96)(15) = 70.6

x2 = μ + z2σ = 100 + (1.96)(15) = 129.4

Therefore, we can expect the middle 95% of the population to have IQ scores between 70.6 and 129.4.

To learn more about population visit:

https://brainly.com/question/24786731

#SPJ11

Answer:

The answer to your problem is, 3 out of 10 or [tex]\frac{3}{10}[/tex]

Step-by-step explanation:

We know that that 7 out of 10 Americans live in an urban city. Lets put 7 out of 10 in a fraction: [tex]\frac{7}{10}[/tex]

Do some simple math:

10 - 7 = 3

So 3 out of 10 or [tex]\frac{3}{10}[/tex] Americans live in a large city.

Thus the answer to your problem is, 3 out of 10 or [tex]\frac{3}{10}[/tex]

We have shown that there exists some c in (0, 1) such that f(c) = g(c).

By the intermediate value theorem, since f and g are continuous on [0, 1], and f(0) < g(1), there exists some a in the interval [0, 1] such that f(a) = g(1).

Similarly, since f and g are continuous on [0, 1] and f(1) > g(1), there exists some b in the interval [0, 1] such that f(1) > g(b).

Now, consider the function h(x) = f(x) - g(x). Then h is continuous on [0, 1], and h(0) < 0 and h(1) > 0.

By the intermediate value theorem again, there exists some c in the interval (0, 1) such that h(c) = 0, which means that f(c) - g(c) = 0, or f(c) = g(c). Thus, we have shown that there exists some c in (0, 1) such that f(c) = g(c).

To learn more about continuous visit:

https://brainly.com/question/31694381

#SPJ11

The art museum had 4,000 visitors that month, as 1,600 visitors during a week represented 40% of the total visitors for the month.

Let's denote the total number of visitors for the month with "x".

According to the problem, the number of visitors during a particular week (1,600) was 40% of the total number of visitors for the month.

We can write this as an equation

1,600 = 0.4x

To solve for "x", we need to isolate it on one side of the equation. We can do this by dividing both sides of the equation by 0.4

1,600 ÷ 0.4 = x

Simplifying the left side

4,000 = x

Therefore, the art museum had a total of 4,000 visitors that month.

To know more about total visitors:

https://brainly.com/question/15262826

#SPJ1

This means that there exists a nonzero vector x such that Ax=0x, which implies that λ=0 is an eigenvalue of A with a corresponding eigenvector x.

a. If Ax-Ax for some vector x, then à is an eigenvalue of A. - True.

This statement is true because if Ax = λ.x for some vector x, then we can rewrite Ax-Ax = λ.x - λ.x as (A-I)x = 0. This means that the matrix A-I is singular, and therefore its determinant is 0. So, we have det(A-I) = 0, which implies that λ = 1 is an eigenvalue of A.

b. A matrix A is not invertible if and only if 0 is an eigenvalue of A. - False.

This statement is false because a matrix A is not invertible if and only if its determinant is 0, which means that the equation Ax = 0 has a nontrivial solution. This implies that 0 is an eigenvalue of A, but the converse is not necessarily true.

c. If 0 is an eigenvalue of A, then the equation Ax-ox has only the trivial solution. The equation Ax-0x is equivalent to the equation Ax-o and Ax-o - True.

This statement is true because if λ=0 is an eigenvalue of A, then we have (A-0I)x = Ax = 0x, which means that the matrix A-0I is singular, and therefore its determinant is 0. So, we have det(A-0I) = 0, which implies that the equation Ax = 0 has a nontrivial solution. However, if A is invertible, then the only solution to the equation Ax=0 is the trivial solution, which means that Ax-0x = Ax = 0x has only the trivial solution.

d. If 0 is an eigenvalue of A, then there are nontrivial solutions to the equation Ax=0x. The equation Ax-0x is equivalent to the equation Ax=0 - True.

This statement is true because if λ=0 is an eigenvalue of A, then we have (A-0I)x = Ax = 0x, which means that the matrix A-0I is singular, and therefore its determinant is 0. So, we have det(A-0I) = 0, which implies that the equation Ax = 0 has a nontrivial solution. This means that there exists a nonzero vector x such that Ax=0x, which implies that λ=0 is an eigenvalue of A with a corresponding eigenvector x.

To learn more about statement visit:

https://brainly.com/question/2285414

#SPJ11

The distance between the given coordinates  (−5, −19) and (−5, 32) is given by 51 units.

Let us consider the coordinates of two given points be,

(x₁ , y₁ ) = ( -5 , -19 )

(x₂ , y₂ ) = (-5 , 32 )

Distance formula between two points is equals to,

Distance = √ ( y₂ - y₁)² + ( x₂ - x₁ )²

Substitute the values of the coordinates we have,

⇒ Distance = √ ( 32 - (-19))² + ( -5- (-5) )²

⇒ Distance = √ (32 +19)² + (-5 + 5)²

⇒ Distance = √ 51² + 0²

⇒ Distance =  51 units.

Therefore, the distance between the two points is equal to 51 units.

Learn more about distance here

brainly.com/question/31628069

#SPJ1

Parameter 1 corresponds to the cosine function because it has a period of 2, an amplitude of 1, and contains the point (1).

Parameter 2 corresponds to the sine function because it has a period of 2π/2=π, an amplitude of 1, and contains the point (2,-1).

Parameter 1 corresponds to the cosine function because it has a period of 2, an amplitude of 1, and contains the point (1). The equation for a cosine function is:

f(x) = A*cos (Bx) + C

where A is the amplitude, B (2π/period) is the frequency , and C (the average value of the function) is the midline.

A= 1, B = π, and C = 0.

Hence, equation for this function is f(x) = cos (πx)

This function has a period of 2, an amplitude of 1, and contains the point (1).

Parameter 2 corresponds to the sine function because it has a period of 2π/2=π, an amplitude of 1, and contains the point (2,-1).

g(x) = A* sin (Bx) + C (sine function)

where A is the amplitude, B (2π/period) is the frequency , and C (the average value of the function) is the midline

A= 1, B = 2π/2 = π, and C = -1.

g(x) = sin (πx) - 1

This function has a period of 2, an amplitude of 1, and contains the point (2, -1).

learn more about trigonometric functions: https://brainly.com/question/25618616

#SPJ1

This is because as the sample size increases, the confidence interval becomes more precise and thus narrower.

When the level of confidence and sample standard deviation remains the same, a confidence interval for a population mean based on a sample of n = 100 will be narrower than a confidence interval for a population mean based on a sample of n = 50. This is because larger sample sizes typically result in more precise estimates of the population mean, leading to a smaller margin of error and therefore a narrower confidence interval.
This is because as the sample size increases, the confidence interval becomes more precise and thus narrower.

LEARN MORE ABOUT confidence interval

https://brainly.com/question/24131141

#SPJ11

Answer:

[tex]x = \sqrt{ {19}^{2} - {15.2}^{2} } = 11.4[/tex]

Surface area =

2(1/2)(11.4)(15.2) + 16(11.4) + 16(19) + 16(15.2)

= 173.28 + 182.4 + 304 + 243.2

= 902.88 square yards

To achieve your goal of $1,000,000 in today's dollars in 40 years with a 9% annual return on your investments, you need to deposit approximately $37.10 into your saving account each week. To determine how much you need to deposit into your saving account each week to achieve your goal of $1,000,000 in today's dollars in 40 years, follow these steps:

Step:1. Adjust for inflation: First, estimate the future value of $1,000,000 in 40 years by considering an average annual inflation rate of 3% (a common assumption). Use the formula:
Future Value = Present Value * (1 + Inflation Rate) ^ Number of Years
Future Value = $1,000,000 * (1 + 0.03) ^ 40
Future Value ≈ $3,262,037
Step:2. Calculate the weekly deposit amount: Since you expect to earn a 9% annual return on your investments, convert this to a weekly rate by dividing by 52 (assuming compounded weekly):
Weekly Interest Rate = (1 + 0.09) ^ (1/52) - 1
Weekly Interest Rate ≈ 0.00165
Step:3. Determine the number of weekly deposits over the 40-year period:
Number of Weeks = 40 Years * 52 Weeks/Year
Number of Weeks = 2,080
Step:4. Use the future value of an annuity formula to calculate the weekly deposit amount:
Weekly Deposit = Future Value / (((1 + Weekly Interest Rate) ^ Number of Weeks) - 1) / Weekly Interest Rate
Weekly Deposit = $3,262,037 / (((1 + 0.00165) ^ 2,080) - 1) / 0.00165
Weekly Deposit ≈ $37.10
In conclusion, to achieve your goal of $1,000,000 in today's dollars in 40 years with a 9% annual return on your investments, you need to deposit approximately $37.10 into your saving account each week.

Learn more about investments here, https://brainly.com/question/24703884

#SPJ11

The equation of the line in slope intercept form is: y = 3x - 5

The general form of the equation of a line in slope intercept form is:

y = mx + c

where:

m is slope

c is y-intercept

From the graph given, we see that the y-intercept which is the point where the line crosses the y-axis is at: y = -5

To get the slope, we will use two points namely:

(0, -5) and (1, -2)

Thus:

Slope = (-2 + 5)/(1 - 0)

Slope = 3

Thus, the equation is:

y = 3x - 5

Read more about Slope and y-intercept at: https://brainly.com/question/1884491

#SPJ1

The total ticket sales revenue for the stadium was $1,001,258.

To find the total ticket sales revenue, we need to multiply the number of tickets sold at each price point by the corresponding ticket price, and then add up the results.

For the 4,000 tickets sold at $75 each, the total revenue would be:

4,000 x $75 = $300,000

For the 5,350 tickets sold at $62 each, the total revenue would be: 5,350 x $62 = $331,700

And for the 7,542 tickets sold at $49 each, the total revenue would be: 7,542 x $49 = $369,558

To find the total revenue, we simply add up these three amounts:

$300,000 + $331,700 + $369,558 = $1,001,258

Assume that all of the tickets were sold and that there were no discounts or promotions applied to any of the ticket prices.

Learn more about revenue here:

https://brainly.com/question/27325673

#SPJ4

Of the options given, cofilin would be expected to increase the rate of actin depolymerization on the minus end of the filament.

The depolymerization of actin filaments is a dynamic process that is regulated by a variety of proteins. Actin filaments grow by the addition of ATP-G-actin subunits to the plus end of the filament and can depolymerize from the minus end. Several proteins regulate actin depolymerization by binding to actin filaments and promoting filament disassembly. Of the options given, cofilin would be expected to increase the rate of actin depolymerization on the minus end of the filament.

Cofilin is a small actin-binding protein that binds to ADP-actin subunits within the filament, inducing a conformational change that destabilizes the filament and promotes depolymerization. Cofilin binds preferentially to the ADP-bound subunits, which are found primarily at the minus end of the filament. By binding to these subunits, cofilin promotes the disassembly of the filament from the minus end, increasing the rate of depolymerization.

In contrast, ATP-G-actin is the monomeric form of actin that is added to the plus end of the filament and promotes filament growth. Cap Z is a capping protein that binds to the plus end of the filament, stabilizing it and preventing depolymerization. Profilin is an actin-binding protein that binds to ATP-G-actin, promoting its polymerization into filaments. Thymosin β4 is a protein that binds to actin monomers, preventing their polymerization into filaments and sequestering them in the cytoplasm.

Therefore, of the options given, cofilin would be expected to increase the rate of actin depolymerization on the minus end of the filament.

To know more about Cofilin refer here:

https://brainly.com/question/24250665

#SPJ11

The answer is option d.

For the first question, we want to find a 90% confidence interval for the proportion of shoppers in the population who use a browser other than Firefox or Chrome. We can use the formula:

CI = p ± z*√(p(1-p)/n)

where p is the sample proportion, z is the z-score for the desired confidence level (90% corresponds to a z-score of 1.645), and n is the sample size.

From the data in the Heavenly Sales worksheet, we see that 12 out of 50 shoppers used a browser other than Firefox or Chrome. Therefore, the sample proportion is p = 12/50 = 0.24.

Substituting the values into the formula, we get:

CI = 0.24 ± 1.645*√(0.24(1-0.24)/50)

CI = 0.24 ± 0.126

CI = (0.114, 0.366)

Therefore, the 90% confidence interval for the proportion of shoppers in the population who use a browser other than Firefox or Chrome is between 0.114 and 0.366.

For the second question, we want to find a 90% confidence interval for the population mean amount of time a customer spends on the website. We can use the formula:

CI = x ± t*(s/√n)

where x is the sample mean, t is the t-score for the desired confidence level and degrees of freedom (we use a t-score instead of a z-score because we don't know the population standard deviation), s is the sample standard deviation, and n is the sample size.

From the data in the Heavenly Sales worksheet, we see that the sample mean amount of time spent on the website is x = 25.375 minutes, the sample standard deviation is s = 2.773 minutes, and the sample size is n = 50. To find the t-score, we need to determine the degrees of freedom, which is n-1 = 49. Using a t-table or calculator function, we find that the t-score for a 90% confidence level and 49 degrees of freedom is 1.676.

Substituting the values into the formula, we get:

CI = 25.375 ± 1.676*(2.773/√50)

CI = 25.375 ± 1.482

CI = (23.893, 26.857)

Therefore, the 90% confidence interval for the population mean amount of time a customer spends on the website is between 23.893 and 26.857 minutes. The answer is option d.

To learn more about minutes visit:

https://brainly.com/question/15600126

#SPJ11

Assuming the sample values are normally distributed, we can construct a 95% confidence interval estimate of the standard deviation of wake times for the population with drug treatments.

Using the formula for a confidence interval estimate of a population standard deviation, we can calculate the lower and upper bounds of the interval. The formula is:

(Lower Bound) ≤ σ ≤ (Upper Bound)

Where:
Lower Bound = √(n - 1) x s^2 / χ^2 (α/2, n-1)
Upper Bound = √(n - 1) x s^2 / χ^2 (1-α/2, n-1)
n = sample size (28)
s = sample standard deviation (41.2 minutes)
χ^2 (α/2, n-1) = chi-square value for α/2 and n-1 degrees of freedom (from chi-square distribution table)
χ^2 (1-α/2, n-1) = chi-square value for 1-α/2 and n-1 degrees of freedom (from chi-square distribution table)
α = level of significance (0.05 for a 95% confidence interval)
Plugging in the values, we get:
Lower Bound = √(28-1) x (41.2)^2 / χ^2 (0.025, 27) = 26.6
Upper Bound = √(28-1) x (41.2)^2 / χ^2 (0.975, 27) = 65.6
Therefore, the 95% confidence interval estimate of the standard deviation of wake times for a population with drug treatments is between 26.6 and 65.6 minutes. This means that we are 95% confident that the true population standard deviation of wake times for older subjects treated with the drug for insomnia falls within this range.
To construct a 95% confidence interval estimate of the standard deviation of wake times for a population with drug treatments, follow these steps:

1. Identify the sample size (n), sample standard deviation (s), and the chi-square values from the chi-square distribution table for the given confidence level:
- Sample size (n): 28 subjects
- Sample standard deviation (s): 41.2 minutes

For a 95% confidence level with 27 degrees of freedom (n-1), the chi-square values are:
- Lower chi-square value (χ²₁): 14.573
- Upper chi-square value (χ²₂): 41.337

2. Apply the chi-square formula to calculate the lower and upper limits of the confidence interval:
Lower limit = √((n - 1) × s² / χ²₂) = √((28 - 1) × 41.2² / 41.337) = 31.1 minutes
Upper limit = √((n - 1) × s² / χ²₁) = √((28 - 1) × 41.2² / 14.573) = 62.0 minutes

3. Interpret the result:
The 95% confidence interval estimate for the standard deviation of wake times in a population treated with the drug for insomnia is between 31.1 minutes and 62.0 minutes. This means that we are 95% confident that the true standard deviation of wake times for this population lies within this range.

Learn more about :

Sample value : brainly.com/question/14404224

#SPJ11