Answer:
effects of gravity on the Moon and Earth
Explanation: Newton found the Moon's inward acceleration in its orbit to be 0.0027 metre per second per second, the same as (1/60)2 of the acceleration of a falling object at the surface of Earth.
a mass of 2.00 kg rest on a rough horizontal table. The coefficient of static friction between the block and the table is 0.60. The block is attached to a hanging mass by a string that goes over a smooth pulley,as shown in the diagram. Determine the largest mass that can hang in this way without forcing the block to slide.
Answer:
1.2 kg
__________________________________________________________
We are given:
Mass of the block = 2 kg
Coefficient of Static Friction = 0.6
__________________________________________________________
Friction Force on the Block:
Finding the Normal Force:
We know that the normal force will be equal and opposite to the weight of the 2 kg block
So, Normal Force = mg
replacing the variables with the given values
Normal Force = (2)(9.8) [Taking g = 9.8]
Normal Force = 19.6 N
Friction force on the Block:
We know that:
Coefficient of Static Friction = Static Friction Force/Normal Force
replacing the variables
0.6 = Static Friction force / 19.6
Static Friction force = 0.6*19.6 N [Multiplying both sides by 19.6]
Static Friction force = 11.76 N
__________________________________________________________
Largest Mass that can Hang:
We know that the Static Friction force is 11.76 N, this means that a force of 11.76 N will be applied to keep the object at rest
So, if the weight of the second block is less than the static friction force, it will hang
Weight of the second block ≤ 11.76
We know that weight = mg
mg ≤ 11.76
m(9.8) ≤ 11.76 [since g = 9.8]
m ≤ 1.2 kg [dividing both sides by 9.8]
From this, we can say that the maximum mass of the second block is 1.2 Kg
HELPP physics final will give brainliest
what is the lowest possible tempature
Absolute zero, technically known as zero kelvins, equals −273.15 degrees Celsius, or -459.67 Fahrenheit, and marks the spot on the thermometer where a system reaches its lowest possible energy, or thermal motion.
PLEASE ans The question's in the pictures, please don't answer what already has answers. Only answer if you can finish both pages completely PLEASE I NEED HELP :(( if ur ans is relevant I will mark brainliest
How long would it take a train traveling at 18 m/s to travel 7,500 m? Answer in minutes.
Please I need help !!
Answer:
6.94446 min
Explanation:
t=s/v
E=6.63E-34J-s*4.6E14 hz
in the case shown below, the 1 kg rock rides on a horizontal disk that rotates at constant speed 5m/s
Answer:25 N
Explanation:
in the case shown below, the 1 kg rock rides on a horizontal disk that rotates at constant speed 5m/s is 25N
what is speed ?Speed is the ratio of distance with respect to the time in which the distance was covered. Speed is a scalar quantity as it does not have magnitude only have direction
The formula of speed can be represented as s=d/t, Where, s is the speed in m.s-1, d is the distance traveled in m, t is the time taken in s
Uniform speed is defined when the object covers equal distance at equal time intervals, variable speed is defined as when the object covers a different distance at equal intervals of times.
Average speed is defined as the total distance travelled by an object to the total time taken by the object.
Instantaneous speed is defined as when the object is move with variable speed, then the speed at any instant of time is known as instantaneous speed.
For more details regarding speed, visit
brainly.com/question/13263542
#SPJ5
Gregor Mendel observed that pea plant traits did not blend in their offspring?
compute the velocity of light in calcium fluoride which has dielectric constant of 2.056 .
Answer:
idl low presure but de 2.518 has a 6 divide 8 equal di. ko alam?plz help asap.
1. Describe the methods by which an electric potential develops in primary cells and dry cells.
2. Describe the methods by which an electric potential develops in generators and thermocouples.
3. Identify the scenarios below as to whether they would increase or decrease the resistance of an electric current through a body.
a. Increase the length of the conductor
b. Utilize a conductor with a larger cross-section
c. Cool the conductor to lower its temperature
4. If 0.8 Wh of electrical energy is lost as heat, how much heat energy (in Btu) is produced?
5. How many kilowatt-hours of energy would be used by a 40 W bulb that runs for 10 hours every day during the course of one year?
Not my answer but nevertheless
Answer:
Electric potential develops in primary/dry cells through a chemical reaction between the cell plates of the cell. free electrons move from the zinc plate to the copper plate through a conducting material.
Electric potential develops in Generators via magnetic induction i.e. the movement of a conducting rod through the magnetic field between the poles of the horseshoe magnets produces Electric potential in Generators.
Electric potential develops in thermocouples via heat transfer ; A heat source is applied to the connecting end of the thermocouple strips and this will cause the production electric charges ( potential ) at the free ends
3) Identifying effect of each scenerio
a) The resistance of an electric current will increase when the length of the conductor increases
b) The resistance of an electric current through a body will decrease when the conductor has a larger cross-section
c) The resistance of an electric current through a body will decrease when the temperature of the conductor is cooled
4) The amount of heat lost as heat in Btu = 2.73 Btu
amount of heat lost = 0.8 Wh
convert to Btu = 0.8 Wh / 0.293 = 2.73 Btu ( note : 1 Btu = 0.293 Wh )
5) The amount of of energy used by a 40 W bulb for 365 days = 146 kWh
Power of bulb = 40 W
Run time = 10 hours * 365 days
∴ amount of energy used = 3650 * 40 = 146 * 10^3 Wh = 146 kWh
Hey guys this is Ap physics please help I need this to pass i will mark brainliest for a good attempt
Split up the forces into components acting parallel to and perpendicular to the slope. See the attached picture for the reference axes.
The box stays on the surface of the plane, so that the net force acting perpendicular to it is 0, and the only acceleration is applied in the parallel direction.
Let m be the mass of the box, θ the angle the plane makes with the ground, and a the acceleration of the box. By Newton's second law, we have
• net parallel force
∑ Force (//) = W (//) - F = m a
(that is, the net force in the parallel direction is the sum of the parallel component of the weight W and the friction F which acts in the negative direction)
• net perpendicular force
∑ Force (⟂) = W (⟂) + N = 0
Notice that
W (//) = W sin(θ) … … … which is positive since it points down the plane
W (⟂) = -W cos(θ) … … … which is negative since it points opposite the normal force N
So the equations become
W sin(θ) - F = m a
-W cos(θ) + N = 0
Solving for a gives
a = (W sin(θ) - F ) / m
which is good enough if you know the magnitude of the friction force.
If you don't, you can write F in terms of the coefficient of kinetic friction between the box and plane, µ, as
F = µ N
so that
a = (W sin(θ) - µ N ) / m
and the normal force itself has a magnitude of
N = W cos(θ)
so that
a = (W sin(θ) - µ W cos(θ) ) / m
The weight W has magnitude m g, where g is the magnitude of the acceleration due to gravity, so
a = (m g sin(θ) - µ m g cos(θ) ) / m
a = g (sin(θ) - µ cos(θ))
The students look through the side of the aquarium.
They notice that the image of the tongs appears to break as the tongs enter the water.
Which property of light are the students observing in this situation?
Answer:
light refraction
Explanation:
The mass and coordinates of three objects are given below: m1 = 6.0 kg at (0.0, 0.0) m, m2 = 1.5 kg at (0.0, 4.1) m, and m3 = 4.0 kg at (1.9, 0.0) m. Determine where we should place a fourth object with a mass m4 = 7.9 kg so that the center of gravity of the four-object arrangement will be at (0.0, 0.0) m
Answer:
The location of the center of gravity of the fourth mass is [tex]\vec r_{4} = (-0.961\,m,-0.779\,m)[/tex].
Explanation:
Vectorially speaking, the center of gravity with respect to origin ([tex]\vec r_{cg}[/tex]), measured in meters, is defined by the following formula:
[tex]\vec r_{cg} = \frac{m_{1}\cdot \vec r_{1}+m_{2}\cdot \vec r_{2}+m_{3}\cdot \vec r_{3}+m_{4}\cdot \vec r_{4}}{m_{1}+m_{2}+m_{3}+m_{4}}[/tex] (1)
Where:
[tex]m_{1}[/tex], [tex]m_{2}[/tex], [tex]m_{3}[/tex], [tex]m_{4}[/tex] - Masses of the objects, measured in kilograms.
[tex]\vec r_{1}[/tex], [tex]\vec r_{2}[/tex], [tex]\vec r_{3}[/tex], [tex]\vec r_{4}[/tex] - Location of the center of mass of each object with respect to origin, measured in meters.
If we know that [tex]\vec r_{cg} = (0,0)\,[m][/tex], [tex]\vec r_{1} = (0,0)\,[m][/tex], [tex]\vec r_{2} = (0, 4.1)\,[m][/tex], [tex]\vec r_{3} = (1.9,0.0)\,[m][/tex], [tex]m_{1} = 6\,kg[/tex], [tex]m_{2} = 1.5\,kg[/tex], [tex]m_{3} = 4\,kg[/tex] and [tex]m_{4} = 7.9\,kg[/tex], then the equation is reduced into this:
[tex](0,0) = \frac{(6\,kg)\cdot (0,0)\,[m]+(1.5\,kg)\cdot (0,4.1)\,[m]+(4.0\,kg)\cdot (1.9,0)\,[m]+(7.9\,kg)\cdot \vec r_{4}}{6\,kg+1.5\,kg+4\,kg+7.9\,kg}[/tex]
[tex](6\,kg)\cdot (0,0)\,[m]+(1.5\,kg)\cdot (0,4.1)\,[m]+(4\,kg)\cdot (1.9,0)\,[m]+(7.9\,kg)\cdot \vec r_{4} = (0,0)\,[kg\cdot m][/tex]
[tex](7.9\,kg)\cdot \vec r_{4} = -(6\,kg)\cdot (0,0)\,[m]-(1.5\,kg)\cdot (0,4.1)\,[m]-(4\,kg)\cdot (1.9,0)\,[m][/tex]
[tex]\vec r_{4} = -0.759\cdot (0,0)\,[m]-0.190\cdot (0,4.1)\,[m]-0.506\cdot (1.9,0)\,[m][/tex]
[tex]\vec r_{4} = (0, 0)\,[m] -(0, 0.779)\,[m]-(0.961,0)\,[m][/tex]
[tex]\vec r_{4} = (-0.961\,m,-0.779\,m)[/tex]
The location of the center of gravity of the fourth mass is [tex]\vec r_{4} = (-0.961\,m,-0.779\,m)[/tex].
Pushes and pulls that result from objects that are physically touching
each other
Answer:
That is false. Take a look at this way. You can push a ball with your own breath, you just need to blow it. And you can pull something from afar with a magnet. It is possible to do both.
Explanation:
Not all physical things can be done only physically. Like I just said, it is possible to use other forces (no, not the dark side one), such as a magnetic force, displayed by a magnet or anything with a force like so.
Which kind of lens can correct a myopic (nearsighted) eye?
Answer:
diverging lens
Explanation:
Since the nature of the problem of nearsightedness is that the light is focused in front of the retina, a diverging lens will serve to diverge light before it reaches the eye. This light will then be converged by the cornea and lens to produce an image on the retina.
Statement About
1. Chromosomal and genetic mutations are two types of
mutations.
True or false
PLEASE ANSWER
Answer:
true
Explanation:
A gene mutation is a permanent change in the DNA sequence of a gene. Mutations can occur in a single base pair or in a large segment of a chromosome and even span multiple genes. Mutations can result from endogenous (occurring during DNA replication) or exogenous (environmental) factors. Germline mutations occur in gametes. Somatic mutations occur in other body cells. Chromosomal alterations are mutations that change chromosome structure. Point mutations change a single nucleotide.
Two major categories of mutations are germline mutations and somatic mutations.
Germline mutations occur in gametes. These mutations are especially significant because they can be transmitted to offspring and every cell in the offspring will have the mutation.
Somatic mutations occur in other cells of the body.
one newton equals 0.225
A sled is pulled with a force of 540 N at an angle of 40° with the horizontal. What are the horizontal and vertical components of this force?
Answer:
Fx = 467.65N
Fy = 270N
Explanation:
Given
Force = 540N
angle of inclination = 40 degree
Horizontal component Fx = Fcos 30
Fx = 540cos30
Fx = 540(0.8660)
Fx = 467.65N
Hence the horizontal component is 467.65N
Vertical component Fy = Fsin 30
Fy = 540sin30
Fy = 540(0.5)
Fy = 270N
Hence the vertical component is 270N
Two objects of equal mass are a distance of 5.0 m apart and attract each other with a gravitational force of 3.0 x 10^-7 N find their mass.
A) 150 kg
B) 9.8 kg
C) 11.000 kg
D) 340 kg
Answer
I Think Its 150
How much heat is absorbed by 3 kg honey baked ham as energy from the oven causes its temperature to change from 10°C to 60°C? (Specific heat capacity of ham 3287 cal/kgºC)?
Answer:
The answer is 493.05kJ
Explanation:
given
mass m= 3kg
t1= 10°C
t2= 60°C
Specific heat capacity of ham =3287 cal/kgºC
Required,
The quantity of heat, Q
Step two:
the formula is
Q= mcΔT
substitute
Q= 3*3287(60-10)
Q=9861*50
Q=493050 J
Q= 493.05kJ
Compute the specific heat capacity at constant volume of nitrogen (N2) gas. The molar mass of N2 is 28.0 g/mol.
Answer:
724.3J/Kg.K
Explanation:
CHECK THE COMPLETE QUESTION BELOW
Compute the specific heat capacity at constant volume of nitrogen (N2) gas.and compare with specific heat of liquid water. The molar mass of N2 is 28.0 g/mol.
The specific heat capacity can be computed by using expression below
c= CV/M
Where c= specific heat capacity
M= molar mass
CV= molar hear capacity
Nitrogen is a diatomic element, the Cv can be related to gas constant with 5/2R
Where R= 8.314J/mol.k
Molar mass= 28 ×10^-3Kg/mol
If we substitute to the expression, we have
c= (5R/2)/(M)
=5R/2 × 1/M
=(5×8.314) /(2×28 ×10^-3)
=724.3J/Kg.K
Hence, the specific heat capacity at constant volume of nitrogen (N2) gas is
724.3J/Kg.K
The specific heat of liquid water is about 4182 J/(K kg) which is among substance with high specific heat, therefore specific heat of Nitrogen gas is 724.3J/Kg.K which is low compare to that of liquid water.
What do we call the material such as air that light travels through
Answer:
Transparent or Translucent
Explanation:
A scientist who wants to study the affects of fertilizer on plants sets up an experiment. Plant A gets no fertilizer, Plant B gets 5 milligrams of fertilizer, and Plant C gets 10 milligrams of fertilizer. Which plant is the control group in this experiment?
Answer: Plant A
Explanation: The control group is participants who do not receive the experimental treatment.
Determine the distance between a newly discovered planet and its single moon if the orbital period of the moon is 1.2 Earth days and the mass of the planet it orbits is 9.38E24 kg.You may assume the orbit to be circular.
Answer:
The distance is [tex]r = 55430496 \ m[/tex]
Explanation:
From the question we are told that
The period of the moon [tex]T = 1.2 days = 1.2 * 24 * 3600 = 103680 \ s[/tex]
The mass of the planet is [tex]m_p = 9.38*10^{24} kg[/tex]
Generally the period of the moon is mathematically represented as
[tex]T = 2 * \pi * \sqrt{ \frac{r^3 }{ G * m_p } }[/tex]
Here G is the gravitational constant with value
[tex]G = 6.67 *10^{-11} \ N \cdot m^2/kg^2[/tex]
=> [tex]T = 2 * \pi * \sqrt{ \frac{r^3 }{ G * m_p } }[/tex]
=> [tex]103680 = 2 * 3.142 * \sqrt{ \frac{r^3 }{ 6.67*10^{-11} * 9.38*10^{24} } }[/tex]
=> [tex]272218492.31 = \frac{r^3}{ 6.67 *10^{-11} * 9.38*10^{24}}[/tex]
=> [tex]r = \sqrt[3]{ 1.7031241*10^{23}}[/tex]j
=> [tex]r = 55430496 \ m[/tex]
What is the initial vertical velocity of the ball?
A.
0 m/s
B.
9.81 m/s
C.
20.0 m/s
D.
60.0 m/s
a car traveling at 28.4 m/s undergoes a constant deceleration of 1.92 m/s2 when the breaks are applied. How many revolutions does each tire make before the car comes to a stop
Complete Question
a car traveling at 28.4 m/s undergoes a constant deceleration of 1.92 m/s2 when the breaks are applied. How many revolutions does each tire make before the car comes to a stop? Assume that the car does not skid and that each tire has a radius of 0.307 m. Answer in units of rev.
Answer:
The value is [tex]N = 109 \ rev[/tex]
Explanation:
From the question we are told that
The speed of the car is [tex]u = 28.4 \ m/s[/tex]
The constant deceleration experienced is [tex]a = 1.92 \ m/s^2[/tex]
The radius of the tire is [tex]r = 0.307 \ m[/tex]
Generally from kinematic equation we have that
[tex]v^2 = u^2 + 2as[/tex]
Here v is the final velocity which is 0 m/s
So
[tex]0^2 = 28.4^2 + 2 * 1.92 * s[/tex]
=> [tex]s = 210.04 \ m[/tex]
Generally the circumference of the tire is mathematically represented as
[tex]C = 2 \pi r[/tex]
=> [tex]C = 2 * 3.142 * 0.307[/tex]
=> [tex]C = 1.929 \ m[/tex]
Generally the number of revolution is mathematically represented as
[tex]N = \frac{ s}{C}[/tex]
=> [tex]N = \frac{210.04}{1.929}[/tex]
=> [tex]N = 109 \ rev[/tex]
What is the flow sensitivity of a biosensor?
Answer:
Sensitivity of biosensor
The biosensor showed good linear correlation in the wide detection range of 0.001–2000 ng/mL with good sensitivity. In addition, it retained its biosensing property for seven days with high reproducibility
Explanation:
In the past, Africa used to be further away from Europe than it is now
(shown below). What could explain why Africa is closer to Europe now than
it was before? *
Answer: Plates shifting
Explanation: After years and years of plates colliding into solid rock, they slowly become closer together. As recent studies have shown, Africa is currently moving closer to Europe one centimeter every year (one inch every 2.5 years).
Answer:
nvudbwasivnjlscv bwbfvsz
Explanation:
Psychologists often talk of the nature-nurture controversy. Which of these
concepts supports the "nurture" over the "nature" part?
O A. Freudian concepts
O B. James-Lange
OC. Tabula rasa
OD. Biological origins
Answer:
O A. Freudian concepts
Freud (1905) stated that events in our childhood have a great influence on our adult lives, shaping our personality. He thought that parenting is of primary importance to a child's development, and the family as the most important feature of nurture was a common theme throughout twentieth-century psychology (which was dominated by environmentalists theories).
Explanation:
Hope this helped!
O A. Freudian concepts. Freud (1905) stated that events in our childhood have a great influence on our adult lives, shaping our personality.
Who is O.A. Freudian?He thought that parenting is of primary importance to a child's development, and the family as the most important feature of nurture was a common theme throughout twentieth-century psychology (which was dominated by environmentalists theories).
One of the case studies most closely linked with the Austrian psychotherapist Sigmund Freud is the hysterics and treatment of Anna O.
Despite the fact that Freud is intimately identified with Anna O, it is thought that he never actually treated her; instead, Breuer saw the patient.
Therefore, O A. Freudian concepts. Freud (1905) stated that events in our childhood have a great influence on our adult lives, shaping our personality.
To learn more Psychology, refer to the link:
https://brainly.com/question/29436774
#SPJ5
in the case shown below, the 1 kg rock rides on a horizontal disk that rotates at constant speed 5m/s about its vertical axis. the radius of the disk is 1 meter. What is the magnitude of the friction?
Answer:
25
Explanation: