The maximum volume of treated wastewater that should be put in the bottle is approximately 1210 ml. The remaining volume can be filled with water
To calculate the maximum volume of treated wastewater that should be put in the bottle to achieve a dissolved oxygen (DO) concentration of at least 2.0 mg/l at the end of the test, we need to consider the BOD removal efficiency and the initial DO concentration.
a) Calculation for maximum volume of treated wastewater:
Calculate the remaining BOD after treatment:
BOD5 = 200 mg/l (incoming wastewater)BOD5 removal efficiency = 90%Remaining BOD5 = BOD5 × (1 - removal efficiency)= 200 mg/l × (1 - 0.90)
= 20 mg/l
Calculate the theoretical oxygen demand (ThOD):
ThOD = 1.67 × Remaining BOD5= 1.67 × 20 mg/l
= 33.4 mg/l
Calculate the oxygen required (OR):
OR = ThOD - initial DO concentration= 33.4 mg/l - 9.2 mg/l
= 24.2 mg/l
Calculate the maximum volume of treated wastewater:
Volume of treated wastewater = OR / (BOD5 × 0.001)= 24.2 mg/l / (20 mg/l × 0.001)
= 1210 ml
Therefore, the maximum volume of treated wastewater that should be put in the bottle is approximately 1210 ml. The remaining volume can be filled with water.
b) If the mixture is half water and half treated wastewater, the initial DO concentration in the bottle would be:
Initial DO concentration = (0.5 × 9.2 mg/l) + (0.5 × 9.2 mg/l)
= 9.2 mg/l
After five days of the BOD test, assuming a similar BOD removal efficiency of 90%, the remaining BOD would be 20 mg/l (as calculated above).
The DO concentration at the end of the test can be estimated using the BOD5 to DO ratio, which is typically around 1.5:1. This means that for every 1 mg/l of BOD5 removed, approximately 1.5 mg/l of DO is consumed.
Calculating the decrease in DO due to the remaining BOD:
DO decrease = BOD5 removed × (BOD5 to DO ratio)
= (200 mg/l - 20 mg/l) × 1.5
= 180 mg/l × 1.5
= 270 mg/l
Final DO concentration = Initial DO concentration - DO decrease
= 9.2 mg/l - 270 mg/l
= -260.8 mg/l
Please note that a negative DO concentration is not physically meaningful in this context. It suggests that the oxygen demand from the remaining BOD5 exceeds the initial DO concentration. In practice, the DO concentration would reach 0 mg/l or close to it.
Learn more about maximum volume: brainly.com/question/28950621
#SPJ11
the endpoint of the titration is indicated by a change in color of the solution from colorless to faint pink. what kind of error would result if too much naoh was added and the color of the solution turned dark pink? group of answer choices the calculated molar mass would be higher than the true value no error would result because the reaction is finished at the endpoint the calculated molar mass would be lower than the true value no error would result because the molar mass calculation is not related to the volume of titrant used
If too much NaOH is added during the titration and the color of the solution turns dark pink, it would result in an error in the calculation of the molar mass of the substance being titrated.
The endpoint of the titration is indicated by the change in color of the solution from colorless to faint pink, which means that the amount of NaOH added to the solution has reacted completely with the substance being titrated. However, if too much NaOH is added and the solution turns dark pink, it means that the reaction has gone beyond the endpoint, resulting in excess NaOH being present in the solution. This would mean that the amount of NaOH used in the calculation of the molar mass would be higher than the true value, leading to an overestimation of the molar mass. Therefore, the correct answer to this question is that the calculated molar mass would be higher than the true value if too much NaOH was added and the color of the solution turned dark pink. It is important to note that accurate titration requires careful attention to detail and precision in the measurement of volumes, and any deviations from the correct procedure can lead to errors in the results obtained.
for more such questions on titration
https://brainly.com/question/13031875
#SPJ11
Testing precision and accuracy of scale, weigh block exactly 1.000g. these are measurements captured:
0.843 g
0.842 g
0.843 g
Is the scale precise, accurate, both, or neither?
we can conclude that the scale is precise but not accurate. The correct option is d.This means that the scale consistently gives the same measurements, but they are not accurate or close to the true value.
To understand whether the scale is precise, accurate, both, or neither, we need to define these terms. Precision refers to the consistency or reproducibility of measurements, while accuracy refers to how close the measured value is to the true or accepted value. In this case, the true value is 1.000g, and the measurements captured are 0.843 g, 0.842 g, and 0.843 g.Looking at these measurements, we can see that they are not accurate since none of them are close to 1.000g. However, we can also see that they are precise since they are all very similar to each other, with a difference of only 0.001g between the highest and lowest measurement.
Therefore, To improve accuracy, the scale may need to be recalibrated or replaced.
learn more about precise Refer: https://brainly.com/question/30641212
#SPJ11
complete question: Testing precision and accuracy of scale, weigh block exactly 1.000g. these are measurements captured:
a. 0.843 g
b. 0.842 g
c. 0.843 g
d. Is the scale precise, accurate, both, or neither?
copper
A) more active than hydrogen
B) more active than chloride
C) less active (or more noble) than hydrogen
D) less active (or more anodtic ) than hydrogen
The answer C less active (or more noble) than hydrogen. This is because copper has a lower tendency to lose electrons and form cations compared to hydrogen. In other words, copper is a relatively stable element that is not as easily oxidized as hydrogen.
They can be seen in the electrochemical series, which ranks elements according to their tendency to undergo oxidation or reduction reactions. Hydrogen is located higher up on the series, indicating that it is more reactive and has a greater tendency to lose electrons and form cations. On the other hand, copper is located lower down on the series, indicating that it is less reactive and has a lower tendency to undergo oxidation. It is worth noting that copper can still undergo oxidation reactions under certain conditions. For example, when exposed to air and moisture, copper can slowly react to form copper oxide. Additionally, copper can be used as an anode in certain electrochemical cells, indicating that it is more anodic than some other metals. However, in general, copper is considered to be a relatively stable and unreactive element, particularly compared to hydrogen.
learn more about copper here.
https://brainly.com/question/13677872
#SPJ11
a student prepares a aqueous solution of crotonic acid . calculate the fraction of crotonic acid that is in the dissociated form in his solution. express your answer as a percentage. you will probably find some useful data in the aleks data resource.
To calculate the fraction of crotonic acid that is in the dissociated form in the aqueous solution, This means that 0.36% of crotonic acid is in the dissociated form in the aqueous solution.
We need to know the dissociation constant (Ka) of crotonic acid.
According to the ALEKS data resource, the Ka value for crotonic acid is 1.3 x 10⁻⁵.
Next, we can use the equation for the dissociation of a weak acid:
Ka = [tex]\frac{[H+][A-]}{[HA]}\\[/tex]
where [H+] is the concentration of hydrogen ions, [A-] is the concentration of the conjugate base (crotonate ions), and [HA] is the concentration of the weak acid (crotonic acid).
We can assume that the concentration of crotonic acid is equal to the total concentration of the solution (since it's the only solute), and we can also assume that the concentration of hydrogen ions is negligible (since the solution is aqueous). Therefore, we can simplify the equation to:
[tex]Ka=\frac{[A-]}{[HA]} \\\\[/tex]
Rearranging this equation, we get:
[tex]\frac{[A-]}{[HA]} =Ka[/tex]
Taking the square root of both sides, we get:
[tex]\frac{[A-]}{[HA]} =\sqrt{Ka}[/tex]
Plugging in the Ka value for crotonic acid, we get:
= √1.3 x 10⁻⁵
= 0.0036
Learn more about dissociation constant here
https://brainly.com/question/28197409
#SPJ11
1. Which type of nuclear reaction makes the product a greater mass than the reactants?
O Fission
O Fusion
In a nuclear fusion reaction, the product has a greater mass than the reactants.
Difference between nuclear fusion and nuclear fission?Nuclear power generation relies on massive releases of energy made achievable through either nuclear fusion or fission techniques; however, understanding these methods reveals some distinctive lines between them.
Nuclear fusion occurs when the combination of light-weight atoms results in denser nuclei production and intense quantities of heat expulsion.
In contrast to that process is the scale-breaking act known as fission whereby high-density elements such as Uranium undergo chain-splitting requiring intricate triggering mechanisms for energy liberation.
Learn about Nuclear fission here https://brainly.com/question/3992688
#SPJ1
What assumption is built into the TWA value with regard to years of exposure?
A working career
10 years
20 years
30 years
The assumption built into the TWA (time-weighted average) value with regard to years of exposure is that the exposure to the content loaded in a particular environment is spread out over a working career, which typically spans around 30 years.
Therefore, the TWA value is based on an average exposure over a period of time, assuming that an individual will work in that environment for a full career length. However, it should be noted that TWA values may vary depending on the specific type of content being measured and the associated health risks.
The assumption built into the Time Weighted Average (TWA) value with regard to years of exposure is "A working career." This typically means that the TWA value is calculated based on a worker's exposure to a substance or hazard over a 40-hour work week for a duration of approximately 30 years, which is considered a standard working career.
Learn more about health risks at: brainly.com/question/12280232
#SPJ11
Calculate the molar solubility of barium fluoride (BaF2). For barium fluoride, Ksp=2.45×10−5.
Answer:
BaF₂ when it dissolves, dissociates as follows;
BaF₂ --> Ba²⁺ + 2F⁻Molar solubility is the number of moles that can be dissolved in 1 L of solution.
If molar solubility of BaF₂ is x, then molar solubility of Ba²⁺ is x and solubility of
F⁻ is 2x.ksp = [Ba²⁺][F⁻]²ksp = (x)(2x)²2.45 x 10⁻⁵ = 4x³x³ = 0.6125 x 10⁻⁵x = 0.0183 mol/L is molar solubility of BaF₂ -blahblahmali
Explanation:
PART OF WRITTEN EXAMINATION:
Portable Reference Electrode used for measurements in seawater?
A) SCE
B) SHE
C) PGP
D) GPG
E) SSC
The portable reference electrode commonly used for measurements in seawater is the SCE (Saturated Calomel Electrode). The SCE has a stable and reproducible potential,
which makes it ideal for use in harsh environments such as seawater. It is easy to use and can provide accurate measurements of various parameters in seawater, including pH, conductivity, and redox potential. Additionally, SCEs have a long shelf life, making them a cost-effective option for fieldwork. Overall, the SCE is a reliable and convenient choice for reference electrode in seawater measurements
Learn more about Portable Reference Electrode here:
https://brainly.com/question/31725992
#SPJ11
You have 300,000 atoms of a radioactive substance. After 4 half-lives have past, how
many atoms remain?
Remember that you cannot have a fraction of an atom, so round the answer to the nearest whole number.
Nvm, I've solved and got the answer,
It's 18750 atoms
The number of atoms remaining after 4 half-lives has past is 18750 atoms
How do i determine the amount remaining?From the question given above the following data were obtained:
Original amount of radioactive substance (N₀) = 300000 atomsNumber of half-lives (n) = 4 half-livesAmount remaining (N) = ?The number of half-lives, original and amount remaining are related according to the following equation:
N = N₀ / 2ⁿ
Inputting the given parameters, we have:
N = 300000 / 2⁴
N = 300000 / 16
N = 18750 atoms
Thus, we can conclude that the amount remaining after 4 half-lives is 18750 atoms
Learn more about amount remaining:
https://brainly.com/question/28440920
#SPJ1
A naturally occurring, inorganic substance with a characteristic chemical composition and usually a characteristic crystal structure is known as a
A naturally occurring, inorganic substance with a characteristic chemical composition and usually a characteristic crystal structure is known as a mineral. Minerals are essential building blocks of rocks and play a vital role in the Earth's crust.
They are composed of atoms arranged in a specific order, which determines their unique physical and chemical properties.
The chemical composition of a mineral refers to the types and relative proportions of elements that make up the mineral. Minerals can be composed of a single element, such as native copper, or they can be complex, containing multiple elements. The chemical composition of a mineral is often expressed as a chemical formula, which shows the elements present and their relative proportions.
The crystal structure of a mineral refers to the arrangement of atoms within the mineral's lattice. The crystal structure of a mineral is determined by the way in which the atoms are bonded together. Some minerals have simple crystal structures, while others have complex ones. The crystal structure of a mineral affects its physical properties, such as its hardness, colour, and cleavage.
In conclusion, minerals are naturally occurring, inorganic substances with a characteristic chemical composition and usually a characteristic crystal structure. They are important components of rocks and play a crucial role in the functioning of the Earth's crust. Understanding the chemical composition and crystal structure of minerals is essential in determining their physical and chemical properties, which can be useful in a variety of scientific and industrial applications.
To learn more about inorganic substance, refer:-
https://brainly.com/question/30282407
#SPJ11
Concerns over chemical hazards, the need to identify hazardous chemicals in the workplace, and a desire to require supervisors to inform employees of the chemicals they might be exposed to led to ________ laws.
A) right-to-work
B) right-to-employ
C) right-to-know
D) rights and ethics
The concerns over chemical hazards and the need to identify hazardous chemicals in the workplace led to the creation of the "right-to-know" laws. These laws require employers to inform employees about the hazardous chemicals they may come into contact with while working.
The right-to-know laws also require employers to keep records of hazardous chemicals used in the workplace and make them available to employees and government agencies upon request. The goal of these laws is to empower employees with knowledge about the chemicals they work with and the potential risks associated with them. This allows employees to take appropriate precautions and protect themselves from harm. The right-to-know laws are an important aspect of workplace safety and have helped to reduce the number of workplace injuries and illnesses caused by exposure to hazardous chemicals. In summary, the right-to-know laws were enacted due to the need to protect workers from chemical hazards, to identify hazardous chemicals in the workplace, and to require supervisors to inform employees of the chemicals they might be exposed to.
learn more about chemical here
https://brainly.com/question/29039149
#SPJ11
In a triprotic acid, which Ka has the highest value? A) Ka1 B) Ka2 C) Ka3 D) Kb1 E) Kb2 Answer: __________ Determine the [H3O^+] in a 0.265 M HCIO solution. The Ka of HCIO is 2.9 times 10-8. A) 1.1 times 10-10 M B) 7.7 times 10-9 M C) 1.3 times 10-6 M D) 4.9 times 10-4 M E) 8.8 times 10-5 M
In a triprotic acid, Ka1 has the highest value. The correct option is A). The [H₃O⁺] in a 0.265 M HClO solution is approximately 8.8 * 10⁻⁵ M. The correct option is E.
In a triprotic acid, Ka1 has the highest value. Triprotic acids are acids that have three acidic protons that can dissociate in solution. The dissociation of these protons occurs in a stepwise manner, with each step having a unique equilibrium constant (Ka1, Ka2, Ka3). Typically, the first dissociation step (Ka1) has the highest equilibrium constant, meaning it is the most acidic proton and has the greatest tendency to dissociate. As the dissociation process progresses to Ka2 and Ka3, the successive protons are less acidic and have lower equilibrium constants.
To determine the [H₃O⁺] in a 0.265 M HClO solution with a Ka of 2.9 * 10⁻⁸, we can use the following formula:
Ka = ([H₃O⁺][ClO⁻]) / [HClO]
Let x = [H₃O⁺], then [ClO⁻] = x and [HClO] = 0.265 - x. Since x is much smaller than 0.265, we can approximate [HClO] ≈ 0.265.
[tex]2.9 * 10^{-8} = (x^2) / 0.265x^2 = 2.9 * 10^{-8} * 0.265x = \sqrt{(7.685 * 10^{-9})[/tex]
x ≈ [tex]8.8 * 10^{-5} M[/tex]
Therefore, the [H₃O⁺] in a 0.265 M HClO solution is approximately [tex]8.8 * 10^{-5} M[/tex] (option E).
To know more about triprotic acid, refer to the link below:
https://brainly.com/question/22556713#
#SPJ11
what volume does 0.20 g methane gas (ch4) occupy at 312 k and 2.00 atm? your answer should include two significant figures (round your answer to two decimal places). provide your answer below:
To solve this problem, we can use the ideal gas law: PV = n RT, First, we need to find the number of moles of methane gas present. We can use the molar mass of methane (16.04 g/mol) to convert from mass to moles:
0.20 g CH4 x (1 mol CH4 / 16.04 g CH4) = 0.0125 mol CH4
Next, we can rearrange the ideal gas law to solve for volume:
V = (nRT) / P
where n is the number of moles, R is the gas constant (0.0821 L·atm/mol·K), T is the temperature in Kelvin, and P is the pressure in atmospheres.
Plugging in the values we have:
V = (0.0125 mol) x (0.0821 L·atm/mol·K) x (312 K) / (2.00 atm) = 0.156 L
To round to two significant figures, we look at the digit in the hundredths place (5) and round up if it is 5 or greater. Therefore, the final answer is:
V = 0.16 L
To determine the volume that 0.20 g methane gas (CH4) occupies at 312 K and 2.00 atm, you can use the Ideal Gas Law equation: PV = nRT, where P is pressure, V is volume, n is the number of moles, R is the ideal gas constant (0.0821 L atm/mol K), and T is temperature.
1. First, convert the mass of methane to moles by dividing it by its molar mass (CH4 = 12.01 g/mol for C + 4 × 1.01 g/mol for H = 16.04 g/mol):
n = 0.20 g / 16.04 g/mol = 0.0125 mol (rounded to four significant figures)
2. Rearrange the Ideal Gas Law equation to solve for volume: V = nRT/P
3. Plug in the values:
V = (0.0125 mol) × (0.0821 L atm/mol K) × (312 K) / (2.00 atm)
4. Calculate the volume:
V = 0.319 L
The volume of 0.20 g methane gas (CH4) at 312 K and 2.00 atm is 0.32 L.
Visit here to learn more about ideal gas law:
brainly.com/question/28257995
#SPJ11
Place the steps required to calculate the activation energy (Ea) from the Arrhenius equation in the correct order. Start with the first step at the top of the list.
k = Ae-Ea/RT
1. Collect data on the rate constants (k) of the reaction at various temperatures, (2) Take the natural logarithm of the Arrhenius equation to obtain a linear equation: ln(k) = ln(A) - Ea/RT.
3. Plot ln(k) vs 1/T and determine the slope of the line. 4. Use the slope and the gas constant (R) to calculate the activation energy (Ea) using the equation: Ea = -slope x R. 1. Rearrange the Arrhenius equation to isolate Ea: ln(k) = ln(A) - (Ea / RT), (2). Determine the rate constants (k) at two different temperatures (T1 and T2) from experimental data.
3. Substitute the known values of k, R (gas constant), and T into the equation for each temperature: ln(k1) = ln(A) - (Ea / R * T1), ln(k2) = ln(A) - (Ea / R * T2), 4. Subtract the first equation from the second to eliminate A: ln(k2 / k1) = Ea / R * (1/T1 - 1/T2) 5. Rearrange the equation to solve for Ea: Ea = R * ln(k2 / k1) / (1/T1 - 1/T2) 6. Calculate the activation energy (Ea) by plugging in the known values of k1, k2, T1, T2, and R into the final equation.
To know more about temperatures click here
brainly.com/question/30074492
#SPJ11
: In this problem, you will answer some basic questions about the electron configuration notation used to show the number of electrons in each subshell of an atom of a particular element. Why should the As subshell be filled before the 3d? The As subshell has greater spherical symmetry than the 3d subshell. The 4s subshell is farther from the nucleus than the 3d subshell. The 4s subshell is at lower energy than the 3d subshell. The As subshell holds fewer electrons than the 3d subshell. Write the electron configuration for the Na^+ ion, which has ten electrons. Enter 3S^3 for 3s^3, etc. Separate the subshells by spaces. 1*s^2, 2*2, 2*p^6, 3*s^1 Write the electron configuration for the Br^- ion, which has thirty-six electrons. Enter 3s^3 for 3s^3 (e.g., 1s^2 2s^2).
1. The 4s subshell should be filled before the 3d subshell because the 4s subshell is at lower energy than the 3d subshell.
Electrons fill the subshells in order of increasing energy.
2. To write the electron configuration for the Na^+ ion, which has ten electrons, follow these steps:
a. Begin with the lowest energy subshell, which is 1s.
b. Fill the subshells with electrons in increasing energy order: 1s, 2s, 2p, 3s, and so on.
c. Stop when you've added ten electrons.
The electron configuration for the Na^+ ion is: 1s^2 2s^2 2p^6
3. To write the electron configuration for the Br^- ion, which has thirty-six electrons, follow the same steps as above, but stop when you've added thirty-six electrons.
The electron configuration for the Br^- ion is: 1s^2 2s^2 2p^6 3s^2 3p^6 4s^2 3d^10 4p^6
To know more about electronic configuration, visit: https://brainly.com/question/30424681
#SPJ11
Based on the percentages of components in Alka-Seltzer and the balanced equation below, determine the limiting reactant assuming 1 gram of Alka-Seltzer. 3NaHCO3(aq)+C6H8O7(aq)\rightarrow3CO2(gas)+Na3C6H5O7(aq)+3H2O(L) A. acetylsalicylic acid (C9H8O4) B. other ingredients C. sodium bicarbonate (NaHCO3) D. citric acid (C6H8O7)
Alka-Seltzer contains three main components: sodium bicarbonate (NaHCO3), citric acid (C6H8O7), and acetylsalicylic acid (C9H8O4). .
According to the manufacturer, Alka-Seltzer contains about 325 mg of sodium bicarbonate, 1000 mg of citric acid, and 325 mg of acetylsalicylic acid per tablet. Assuming that 1 gram of Alka-Seltzer is equivalent to one tablet, we can calculate the approximate percentage of each component as follows:
- Sodium bicarbonate: (325 mg / 1000 mg) x 100% = 32.5%
- Citric acid: (1000 mg / 1000 mg) x 100% = 100%
- Acetylsalicylic acid: (325 mg / 1000 mg) x 100% = 32.5%
Using these percentages, we can make an educated guess about the limiting reactant. Since there is an equal amount of sodium bicarbonate and acetylsalicylic acid in Alka-Seltzer (both at 32.5%), and since citric acid is present in a larger amount (at 100%), it is possible that citric acid could be the limiting reactant.
However, without more precise information about the percentages of each component in Alka-Seltzer, we cannot determine the limiting reactant with certainty.
It's worth noting that even if we did know the exact percentages of each component in Alka-Seltzer, there could be other factors that affect the limiting reactant, such as the temperature and pressure of the reaction. Additionally, the reaction may not proceed according to the balanced equation in a real-world scenario.
To know more about alka-seltzer : https://brainly.com/question/10684030
#SPJ11
Please answer all questions provided in the picture.
Based on the given chemical equation: 2KClO₃ → KCl + 3O₂, There are 2 K (potassium) atoms on the left side (2KClO₃), and 1 K atom on the right side (KCl), There are 6 Cl (chlorine) atoms on the left side (2KClO₃), and 1 Cl atom on the right side (KCl), There are 6 O atoms on the left side (2KClO₃), and 6 O atoms on the right side (3O₂), and No, the equation above is not balanced because the number of atoms of each element is not equal on both sides of the equation.
There are 2 potassium atoms on the left side of the equation, since each formula unit of potassium chlorate (KClO₃) contains one potassium atom, and the coefficient "2" in front of KClO₃ indicates that there are 2 moles of KClO₃. There is 1 potassium (K) atom on the right side of the equation, since each formula unit of potassium chloride contains one potassium atom, and the coefficient "1" in front of KCl indicates that there is 1 mole of KCl.
There are 6 chlorine atoms on the left side of the equation, since each formula unit of potassium chlorate (KClO₃) contains one chlorine atom, and the coefficient "2" in front of KClO₃ indicates that there are 2 moles of KClO₃. There is 1 chlorine (Cl) atom on the right side of the equation, since each formula unit of potassium chloride (KCl) contains one chlorine atom, and the coefficient "1" in front of KCl indicates that there is 1 mole of KCl.
There are 6 oxygen (O) atoms on the left side of the equation, since each formula unit of potassium chlorate (KClO₃) contains three oxygen atoms, and the coefficient "2" in front of KClO₃ indicates that there are 2 moles of KClO₃. There are 6 oxygen (O) atoms on the right side of the equation, since each formula unit of oxygen gas (O₂) contains two oxygen atoms, and the coefficient "3" in front of O₂ indicates that there are 3 moles of O₂.
No, the equation above is not balanced. The coefficients in front of the chemical species are not providing an equal number of atoms of each element on both sides of the equation, indicating an unbalanced equation.
To know more about chlorine atoms here
https://brainly.com/question/20834469
#SPJ1
please help Due today!
Answer: Wrote the answers below
Explanation:
The balanced equation for Number 1 is:
Fe2O3(s) + 3H2(g) --> Fe(s) + 3H2O(l)
Step 1:
moles ratio of iron (III) oxide and hydrogen is 1:3
step 2:
work out mr (molar mass) of fe2o3: 111.68+ 48 = 159.68
moles of iron (III) oxide: 33.5g divided by 159.68 = 0.21 mol
Step 3:
1:3 ratio so 0.21 times 3 = 0.63 mol of hydrogen
Step 4:
mass of hydrogen = mol times mr
0.63 times 2 = 1.26g
mass of hydrogen = 1.26g or 1.27g depending on whether you used 1.00 or 1.01 for the mr of hydrogen
How many moles of NH3 would form from the complete reaction of 14. 0 g N2
The total number of moles NH3 is 1.00 mole, under the condition that the reaction is of 14. 0 g N2.
The given balanced chemical equation for the reaction of nitrogen gas (N2) and hydrogen gas (H2) to form ammonia gas (NH₃) is
N₂(g) + 3H₂(g) → 2NH₃(g)
The molar mass of N₂ is 28.01 g/mol. To evaluate the number of moles of N₂ in 14.0 g of N₂ we divide the mass by the molar mass
Number of moles of N₂ = Mass of N₂ / Molar mass of N₂
Number of moles of N₂ = 14.0 g / 28.01 g/mol
Number of moles of N₂ = 0.4998 mol
Then, the number of moles of NH3 that would form from the complete reaction of 14.0 g N2 can be evaluated
Number of moles of NH₃ = Number of moles of N₂ × (2 moles NH₃ / 1 mole N₂)
Number of moles of NH₃ = 0.4998 mol × (2 mol NH₃ / 1 mol N₂)
Number of moles of NH₃ = 0.9996 mol
Hence, approximately 1.00 mole of NH₃ would form from the complete reaction of 14.0 g N₂.
To learn more about molar mass
https://brainly.com/question/837939
#SPJ4
What is the wavelength of a 2. 99 Hz wave?
The wavelength of a 2.99 Hz wave is approximately 114.38 meters.
To determine the wavelength of a wave, you need to know the wave's frequency (in hertz, Hz) and the speed of the wave. The relationship between wavelength (λ), frequency (f), and speed (v) is given by the equation:
v = λ * f
Where:
v = speed of the wave (in meters per second, m/s)
λ = wavelength of the wave (in meters, m)
f = frequency of the wave (in hertz, Hz)
Substituting the given frequency of 2.99 Hz into the formula, we get:
wavelength = 343 m/s / 2.99 Hz
wavelength = 114.38 meters
Therefore, the wavelength of a 2.99 Hz wave is approximately 114.38 meters.
Learn more about wavelength ,
https://brainly.com/question/31143857
#SPJ4
complete reduction of the ketones in benzil to alcohols with nabh4 leads to three stereoisomers. draw fischer projections of the three stereoisomers. state whether each is optically active or not.
Three stereoisomers two optically active isomers and one non-optically active meso isomer—are produced when benzil is completely reduced with NaBH₄.
When benzil undergoes complete reduction with NaBH₄, three stereoisomers of the resulting alcohols are formed due to the presence of two chiral centers. The Fischer projections of the three stereoisomers can be drawn as follows:
1. 2R,3S-2,3-butanediol:
CH₃ CH₃
| |
OH OH
| |
CHOH CHOH
| |
CH₃ CH₃
This stereoisomer is optically active because it has two different chiral centers.
2. 2S,3S-2,3-butanediol:
CH₃ CH₃
| |
OH OH
| |
CHOH CHOH
| |
CH₃ CH₃
This stereoisomer is also optically active because it has two different chiral centers.
3. meso-2,3-butanediol:
CH₃ CH₃
| |
OH OH
| |
CHOH CHOH
| |
CH₂OH CH₂OH
This stereoisomer is not optically active because it has a plane of symmetry that divides the molecule into two mirror-image halves.
Therefore, the complete reduction of benzil with NaBH₄ leads to three stereoisomers: two optically active isomers and one meso isomer that is not optically active.
Learn more about stereoisomers here
https://brainly.com/question/31147524
#SPJ11
Rank the following types of intermolecular forces in general order of decreasing strength.
a. dipole-dipole
b. hydrogen bonding
c. ion-dipole
d. London dispersion
The general order of decreasing strength for intermolecular forces is: c. ion-dipole, b. hydrogen bonding, a. dipole-dipole, and d. London dispersion.
Intermolecular forces are forces between molecules. Ion-dipole forces are the strongest, as they involve charged ions interacting with a polar molecule.
Hydrogen bonding, a specific type of dipole-dipole interaction, occurs when hydrogen atoms are bonded to highly electronegative atoms like fluorine, oxygen, or nitrogen. Dipole-dipole forces are interactions between polar molecules.
Lastly, London dispersion forces are the weakest and are present in all molecules, resulting from temporary fluctuations in electron distribution.
Hence, The intermolecular forces, in order of decreasing strength, are ion-dipole, hydrogen bonding, dipole-dipole, and London dispersion forces.
learn more about intermolecular forces click here:
https://brainly.com/question/2193457
#SPJ11
which statement best explains what would happen if a reactant were added to a system in equilibrium?(1 point) responses the system would shift toward the products to enhance the change. the system would shift toward the products to enhance the change. the system would shift toward the reactants to oppose the change. the system would shift toward the reactants to oppose the change. the system would shift toward the products to oppose the change. the system would shift toward the products to oppose the change. the system would shift toward the reactants to enhance the change. the system would shift toward the reactants to enhance the change.
In a system at equilibrium, the forward and reverse reactions are occurring at equal rates. This means that the concentration of reactants and products is stable and no net change is observed. However, if a reactant is added to the system, the equilibrium is disrupted and the system is no longer at equilibrium.
The Le Chatelier's Principle states that when a system at equilibrium is disturbed, the system will shift in a way that opposes the change. In the case of adding a reactant, the system will shift towards the products in order to consume the added reactant and restore equilibrium. This is because the increase in reactant concentration is seen as a stress on the system and the system will respond by reducing that stress.
Conversely, if a product is added to the system, the system will shift towards the reactants to consume the added product and restore equilibrium. The system will always try to minimize the effect of the disturbance on the equilibrium.
It is important to note that the extent of the shift in equilibrium will depend on the relative concentrations of the reactants and products, as well as the equilibrium constant of the reaction. The system will shift in a way that minimizes the disturbance while still maintaining the equilibrium constant.
In conclusion, when a reactant is added to a system at equilibrium, the system will shift towards the products to oppose the change and restore equilibrium. The same principle applies when a product is added, with the system shifting towards the reactants.
for more such questions on equilibrium
https://brainly.com/question/19340344
#SPJ11
The ears of the deer are long and eyes are on the side of the head because?
The ears of the deer are long and the eyes are on the side of the head because it helps them detect predators and prey in a wider range of directions.
The position of the eyes on the sides of the head provides deer with a panoramic view of their surroundings, allowing them to spot potential dangers from many directions. The long ears serve as sensitive receivers of sound, which helps deer detect the presence and direction of predators and other animals, as well as communicate with each other. Together, these adaptations give deer a better chance of survival in their environment.
Learn more about panoramic view,
https://brainly.com/question/14308294
#SPJ4
in a double covalent bond, how many total electrons are shared (please only enter the number of shared electrons)?
In a double covalent bond, two atoms share two pairs of electrons.
There are a total of four electrons in the bond since each atom contributes one electron to each of the two pairs that are shared.
By sharing these electrons, the two atoms form a solid link that is crucial for the formation of numerous types of molecules, including organic compounds.
Many molecules, including ethene (C2H4) and carbon dioxide (CO2), have double bonds, which are crucial in establishing the chemical and physical characteristics of these substances.
Generally speaking, the stronger the link and the harder it will be to break the bond, the more electrons that two atoms share.
For such more question on electrons:
https://brainly.com/question/371590
#SPJ11
What information should be included on a label for a peroxide-forming chemical?
- Date received, date opened
- Date received, date to discard
- Date opened, date to discard
- Date received, date opened, date to discard
"The information that should be included on a label for a peroxide-forming chemical is - Date received, date opened, and date to discard".
The information that should be included on a label for a peroxide-forming chemical is the date received, date opened, and date to discard. This information is essential to ensure the safe handling and storage of the chemical.
It is important to keep track of when the chemical was received, as well as when it was opened, in order to determine its shelf life and prevent any potential hazards.
Additionally, including the date to discard on the label ensures that the chemical is not used beyond its safe and effective period.
Visit here to learn more about Chemicals:
brainly.com/question/29886197
#SPJ11
Which sample contains the most aluminum atoms:
3 mol Al
30 g Al
1.2 x 10^24 Al atoms
9. A gas with a volume of 1.00 L is at 135°C and 844 mm Hg. What is the volume if the conditions change to 14° C
and 748 mm Hg?
This is an exercise in the Combined Gas Law, also known as the Boyle-Mariotte-Charles-Gay-Lussac Law, it is one of the fundamental laws of physics that describes the behavior of gases under ideal conditions. This law states that, in an ideal gas, if the amount of gas and the temperature are held constant, the pressure and volume of the gas are inversely proportional. Furthermore, if the amount of gas and the pressure are held constant, the volume and temperature of the gas are directly proportional. Finally, if the amount of gas and the volume are held constant, the pressure and temperature of the gas are directly proportional.
The Combined Gas Law is expressed mathematically by the formula (P₁V₁)/T₁ = (P₂V₂)/T₂.
Where:
P₁ = Initial pressure
V₁ = Initial volume
T₁ = Initial temperature
P₂ = Final pressure
V₂ = Final volume
T₂ = Final temperature
This formula can be used to predict changes in the volume, pressure, and temperature of an ideal gas in a closed system when one of these variables is altered while the others are held constant.
The Combined Gas Law has applications in many fields of physics, chemistry, and engineering. For example, it can be used to predict the behavior of gases in combustion processes, to design ventilation systems in buildings, or to understand the dynamics of gases in the Earth's atmosphere. Furthermore, this law is essential for understanding other important concepts in thermodynamics, such as entropy and the internal energy of gases.
Solving our exercise:
We have to:
V₁ = 1.00L
T₁ = 135°C + 273 = 408 K
P₁ = 844 mmHg
V₂ = ?
T₂ = 14°C + 273 = 287 K
P₂ = 748 mmHg
Very well, we already have our data in order, this is one more step in the solution.
We know the formula of this law:(P₁V₁)/T₁ = (P₂V₂)/T₂
As you ask, what is the volume if the conditions change to 14° Cy 748 mm Hg?
We clear for the final volume, which is the value to be calculated.
V₂ = (P₁V₁T₂)/(P₂T₁)
Now we substitute our data and simplify, then
V₂ = (P₁V₁T₂)/(P₂T₁)
V₂ = (844 mmHg × 1.00 L × 287 K)/(748 mmHg × 408 K)
V₂ = (242228 L)/(305184)
V₂ = 0.79 L
If the conditions change to 14 °C and 748 mmHg, the new volume is 0.79 Liters.
ヘ( ^o^)ノ＼(^_^ )If you want to learn more about chemistry, I share this link to complement your learning:
https://brainly.com/question/31676714
Compounds are ________.
A) molecules that are held together by atoms
B) atoms that are electrically charged
C) atoms that are radioactive
D) molecules that have mass
E) molecules that are made of more than one element
Compounds are molecules that are made of more than one element. Therefore the correct option is option E.
These bonds are the result of electron sharing or electron transfer between the atoms of the various components involved.
A compound has a special set of chemical and physical characteristics that set it apart from the characteristics of the elements that make up the compound.
The laws of chemical reactions, which specify that atoms must join in such a way as to achieve a stable, low-energy state, regulate the creation of compounds.
The type and strength of the bonds holding the atoms together, as well as the molecule's geometry, determine the chemical properties of compounds. Therefore the correct option is option E.
For such more question on Compounds:
https://brainly.com/question/27802265
#SPJ11
Why are perchlorate salts unusually hazardous?
- They are toxic and volatile.
- Some are shock-sensitive.
- They are strong bases.
- They are water-reactive.
Perchlorate salts are unusually hazardous primarily because they are toxic and volatile.
Perchlorate salts are unusually hazardous primarily because they are toxic and some are shock-sensitive. Their toxicity can pose a risk to human health and the environment, while their shock-sensitive nature can cause them to react violently upon impact, potentially leading to accidents or explosions. Perchlorate salts are unusually hazardous due to several reasons. Firstly, they are toxic and volatile, meaning they can easily vaporize and become airborne, increasing the risk of inhalation and absorption through the skin. Secondly, some perchlorate salts are shock-sensitive, meaning they can easily detonate or explode when subjected to impact or friction.
Additionally, perchlorate salts are strong bases, which can cause severe chemical burns and damage to tissues and organs upon contact. Finally, they are also water-reactive, which can cause them to release oxygen and hydrogen gas, leading to potential fire and explosion hazards. Overall, the unique combination of these characteristics makes perchlorate salts particularly hazardous and requires careful handling and disposal.
Learn more about Perchlorate salts here: brainly.com/question/8269990
#SPJ11