When aqueous lead (II) nitrate and aqueous potassium iodide are added to a dish containing water, diffusion occurs before the formation of yellow precipitate.
Diffusion is a process involving the movement of molecules to the region of lower concentration from the region of higher concentration.
When aqueous lead (II) nitrate and aqueous potassium iodide are added to a dish containing water, the compounds would dissociate into ions. Immediately after the dissociation, the ions would start to diffuse through the molecules of water to lower concentration.
After diffusion, the yellow compound lead iodide would form from the reaction between iodide ions in potassium iodide and lead ions from lead nitrate. The yellow compound would later precipitate out of the solution.
The reaction involved between the compound result in potassium nitrate and lead iodide
Lead nitrate (aq) + Potassium iodide (aq) → Lead iodide (yellow precipitate) + Potassium nitrate
To know more about Diffusion
https://brainly.com/question/14852229
#SPJ1
key questions 1. what distinguishes each of the four examples in illustrating the methodology? 2. why might it be necessary to put double or even triple bonds between atoms in constructing lewis structures? 3. how does the lewis structure help you identify the length of bonds in a molecule? 4. how is formal charge determined, and how is it used in identifying reasonable lewis structures? 5. in the above examples illustrating the methodology, why are relevant resonant structures - present only in the case of no2 ?
An atom's Lewis structure enables you to predict its bonding patterns and number of bonds. We may ultimately be able to comprehend the structures of molecules & their chemical characteristics using this information.
2. The stability of the molecule increases with the number of charges on each element. In order to reduce the number of different formal charges, a double or triple bond should be applied.
3. Dots are used in the Lewis structure to depict the shared electrons between atoms. Next, ascertain whether there is a single, triple, or triple covalent connection between the two atoms. Third, determine the radius of each of the bonded ions based on the type of bond by using an atom radius chart.
4. By considering each bond as if one-half of the electrons were allocated to each atom in a Lewis structure, formal charges can be ascribed to each atom. These fictitious formal charges serve as a reference for selecting the best Lewis structure.
5. N-O bond as well as a double bond. The N atom possesses a positive charge and an unpaired electron. They are the two principal resonance sources of NO2.
To know more about the Lewis structure, use the following link.
https://brainly.com/question/20300458
#SPJ4
The heating curve shows the energy gain of a substance as it changes from solid to gas. Which section of the graph shows the liquid phase of the
substance gaining kinetic energy?
A. A
B. B
C. C
D. D
E. E
The heating curve is a graphical representation of how various phases of substances change as temperature or heat increases. The graph's C section depicts the liquid phase of the substance gaining kinetic energy.
What is kinetic energy?Kinetic energy is the energy that an object has as a result of its movement. If we want to accelerate an object, we must apply force to it. Using force requires us to put in effort. When the work is finished, energy is transferred to the object, and it moves at a new constant speed.
Therefore,
Section A represents the solid phase
Section B the solid-liquid phase
Section C the liquid phase
Section D the liquid-gas phase
Section E the gas phase
Section C of the graph depicts the substance's liquid phase gaining kinetic energy. Heat energy is absorbed during Phase C, and liquid particles gain kinetic energy to change into gas form in Section E.
As a result, C.C. is the correct answer.
To learn more about kinetic energy, refer to:
https://brainly.com/question/25959744
#SPJ13
what elements does KOH contain
Answer:
K- Potassium
O- Oxygen
H- Hydrogen
KOH is called as Potassium Hydroxide and it contains K (Potassium), O (Oxygen) and H (Hydrogen) elements.
Caustic potash is a common name for potassium hydroxide, an inorganic compound with the formula KOH. The majority of its industrial and niche applications capitalize on its caustic nature and acid reactivity. It important because it is the starting point for most liquid and soft soaps, as well as many chemicals that contain potassium.
It is a dangerously corrosive white solid. KOH has a high level of thermal stability. Melt-casting it into pellets or rods with low surface areas and easy handling properties is common due to its high stability and low melting point. Because KOH is hygroscopic, these pellets become tacky when exposed to air.
Its dissolution in water is strongly exothermic, with water and carbonates accounting for the remaining 90% purity. A common name for concentrated aqueous solutions is potassium lye. Solid KOH does not easily dehydrate even at high temperatures.
Learn more about potassium hydroxide here:
https://brainly.com/question/12065588
Suppose you prepare a 5 μ m solution of red dye and a 5 μ m solution of blue dye and observe them in two identical test tubes. Why might the blue dye solution appear more intensely colored than the red dye solution?.
The molar absorptivity of the blue dye is greater than the molar absorptivity of the red dye.
The Beer-Lambert Law equation is as follows
A = εcl
where; ε= molar absorptivity
A= absorbance
l = optical path length
c= molar concentration
The molar absorptivity of the blue dye;
1.30 x 10⁵ M⁻¹cm⁻¹
The molar absorptivity of the red dye :
2.13 × 10⁴ cm⁻¹M⁻¹
This is reason that the blue dye solution appear more intensely colored than the red dye solution
Following are the factors that can affect the molar absorptivity:
1.The amount of light absorbed by the substance for a specific wavelength.
2.The distance that the light travels through the solution.
3.The concentration of the absorbing solution per unit volume.
To learn more about molar absorptivity click here
brainly.com/question/14651113
#SPJ4
a 1.0857g sample of a compound containing only carbon, hydrogen, and oxygen was burned in excess oxygen gas. 3.190g of co2 and 0.9360g of h2o were produced. find the empirical formula of the compound
The empirical formula of the compound is C3H4O as the mole ratio is 3 : 4 : 1
1) Mass of carbon (C) in 3.190 g of carbon dioxide (CO₂)
atomic mass of C: 12.0107 g/mol
molar mass of CO₂: 44.01 g/mol
Setting up proportion as:
12.0107 g of C / 44.01 g of CO₂ = x / 3.190 g of CO₂
x = 0.87057 g of C
2) Mass of hydrogen (H) in 0.9360 g of water (H₂O)
atomic mass of H: 1.00784 g/mol
molar mass of H₂O: 18.01528 g/mol
Setting up proportion as:
2 × 1.00784 g of H / 18.01528 g of H₂O = x / 0.9360 g of H₂O
x = 0.10472 g of H
3) Mass of oxygen (O) in 1.0857 g of pure sample
Mass of O = mass of pure sample - mass of C - mass of H
Mass of O = 0.38397 g O ≈ 0.3840 g
4) Mole calculations
C: 0.87057 g / 12.0107 g/mol = 0.07248 mol
H: 0.10472 g / 1.00784 g/mol = 0.10390 mol
O: 0.3840 g / 15.999 g/mol = 0.02400 mol
So, to find empirical formula the mole ratios are:
C: 3
H: 4
O: 1
Thus the mole ratio is 3 : 4 : 1, and the empirical formula is: C3 H4 O
Learn more about empirical formula here:
https://brainly.com/question/14044066
#SPJ4
Explain the difference between the first and second ionization energy of an element.
The difference between the first and second ionization energy of an element is second ionization energy is larger than first ionization energy.
Ionization energy is the energy required to remove the electron . First ionization energy is the amount of energy required to remove the electron from neutral atom such as M. while second ionization energy is the amount of energy required to remove electron from positively charged ion such as M⁺.
first ionization energy is given as :
M ---> M⁺ + e⁻ , IE1
second ionization energy is given as :
M⁺ ----> M²⁺ + e⁻ , IE2
Thus, The difference between the first and second ionization energy of an element is second ionization energy is larger than first ionization energy.
To learn more about ionization energy here
https://brainly.com/question/28385102
#SPJ1
Dry ice sublimes at −78. 5 oc at a pressure of 1 atm. At room temperature and 1 atm pressure, what is happening to the dry ice molecules on a molecular level as sublimation occurs?.
Dry ice sublimates when its molecules get enough thermal energy to the intermolecular holding the solid crystal together in some cases. This allows some molecules to transition directly into the vapor phase.
What is the process of sublimation?A substance can sublimate directly from its solid to it's own gaseous state without going through a liquid phase. Sublimation is the term most frequently used to describe the process through which snow and ice turn into water vapor in the air before even melting into liquid for those of us who is interested in the water cycle.
Why is sublimation important ?The sublimation procedure is used by chemists to clean up their substances. Typically, a solid is heated in a sublimation apparatus under vacuum. A non-volatile residue of impurities is left behind as the solid volatilizes and condenses as a refined chemical on a cooled surface (cold finger) at this lower pressure.
To know more about Sublimation visit:
https://brainly.com/question/28626755
#SPJ4
what is true of atoms, elements, and minerals? multiple select question. when a mineral is separated into its component atom parts, it is still a mineral. an element is a type of atom that has a specific number of protons. if a single atom of an element is broken apart, its pieces are still recognizable as that element. an atom is the smallest unit of an element that retains the characteristics of that element. minerals are composed of chemically bonded elements.
Correct statements are:
An element is a type of atom that has a specific number of protons.
An atom is the smallest unit of an element that retains the characteristics of that element.
Minerals are composed of chemically bonded elements.
When a mineral is separated into its component atom parts, those parts will act according to the element they belong to, and the elements have properties that differ from the original mineral, because of chemical bonds formed during the creation of the mineral.
If a single atom of an element is broken apart, its pieces are protons, neutrons, and electrons, particles that are universal for all elements, and there is no way to distinguish, for example, iron neutrons from hydrogen neutrons. In cases of radioactive decay, atoms of elements may break down to form new elements.
You can learn more about chemical bonds here:
brainly.com/question/15444131
#SPJ4
to ensure that the decolorization of crystal violet reaction takes place within the linear range of the crystal violet calibration curve, and that there is an excess of hydroxide ions, 10.0 ml of the stock solution of crystal violet is diluted twice. first, with 10.0e so ml of distilled water and then with 10.0 ml of 0.10 m naoh. what is the [oh-] in the final dilute solution?
A calibration curve is a regression model that uses the instrument's reaction to known standards to forecast the unknown concentrations of interest-related analytes.
How do you calculate calibration curve?
The formula will have the general form of y = mx + b, where m denotes the slope and b the y-intercept, as in y = 1.05x + 0.2.When making adjustments to measurements made on samples whose values are unknown, use the equation for the calibration curve.Solve for y (the "true" value) by substituting the measured value (x) into the equation. We have four milliliters of a 2.5 x 10–5 molar solution of crystal violet.the crystal violet kinetics process, too.Usually, adding sodium hydroxide in much larger amounts causes the violet color to fade.You must now add the two of them together to complete this reaction.However, we're attempting to determine the crystal violet concentration prior to the reaction.Therefore, we are not attempting any story geometry; rather, we are attempting to determine the concentration of crystal violet at the start of the reaction.And it's not the crystal violet's concentration.We have four milliliters of a crystal violet solution that is 2.5 x 10 n-5 molar in size.When doing a crystal violet kinetics reaction.The violet tint typically vanishes as you add sodium hydroxide in much bigger amounts.Currently, you need to add the two together in this particular reaction.However, we're looking for the crystal violet concentration just before the reaction starts.We are only attempting to determine the concentration of the crystal violet at the start of the reaction; we are not attempting to perform any stories geometry here.Furthermore, it is not the crystal violet's concentration.All of the components in that particular reaction become diluted when two substances are mixed together.So, when you combine two milliliters of sodium hydroxide solution with four milliliters of the crystal violet solution.The total of those volumes makes up your new volume.Therefore, the result of mixing them is a six-ml solution.Therefore, we must apply the equation polarity times volume is equivalent to mill, aren? T times volume here in order to get the concentration before any of the sodium hydroxide reacts.The number of moles remains constant because we haven't initiated the reaction yet, and it also remains constant in this location.We therefore have a 2.5 times 10 to 5 molar solution. Therefore, we have a 2.5 x 10-5 molar solution in a four milliliter volume.We are currently working on the new mill arat E.However, we are aware that the current volume of our system is six mL.We shall divide both sides by six to obtain the new milliarat E, and we will discover that the new polarity is 1.67 times 10 to the -5moles per liter.We diluted the crystal violet with our other solutions, which reduced the polarity.
To learn more about calibration curve refer
https://brainly.com/question/13492847
#SPJ4
how many possible monobromination products of butane are there? include minor product(s) not just the major product(s). if a product exists as a pair of enantiomers be sure to count both enantiomers as a distinct product.
Possible monobromination products of butane are 3.
What is a monobromination?Monobromination as defined by medicine:
an organic molecule is given one bromine atom by the addition process.
In a chemical process known as bromination, a compound is subjected to bromination, which adds bromine to the substance. Following bromination, the result will possess traits distinct from the initial reactant.
Any reaction or process known as bromination entails the introduction of bromine into a molecule alone. Alkene bromination with the electrophilic addition of Br₂. electrophilic aromatic substitution-based bromination of a benzene ring. Benzylic position bromination using a free radical substitution process.
By way of the reaction, a total of three monobrominated compounds will be produced.
To know more about monobromination visit:
https://brainly.com/question/16048943
#SPJ4
a major component of gasoline is octane . when octane is burned in air, it chemically reacts with oxygen gas to produce carbon dioxide and water . what mass of carbon dioxide is produced by the reaction of of octane?
8.70 g of carbon dioxide are generated by the reaction of octane.
Let's compile all the data in one location since we are aware that we will require a balanced equation with masses and molar masses.
M_r: 32.00 44.01
2C₈H₁₈ + 25O₂ ⟶ 16CO₂ + 18H₂O
m/g: 9.88
(a) Calculate the moles of O₂
n = 9.88 g O₂ ×1 mol O₂ /32.00 g O₂
n = 0.3088 mol O₂.
(b) Calculate the moles of CO₂
(16 mol CO2 to 25 mol O2) is the molar ratio.
n = 0.3088 mol O₂ × (16 mol CO₂/25 mol O₂)
n = 0.1976 mol CO₂
(c) Calculate the mass of CO₂
Mass of CO₂ = 0.1976 mol CO₂ × (44.01 g CO₂/1 mol CO₂)
Mass of CO₂ = 8.70 g CO₂
To know more about gasoline, visit-https://brainly.com/question/12847098
#SPJ4
I have four questions:
1- what can you say about the number of protons in these three metals as you look down in the group. (lithium, sodium, and potassium.)
2- what can you say about the mass number of the three metals.(lithium, sodium, and potassium.)
3- what is similar about the structures of an atom of lithium and an atom of sodium?
4- what is similar about the structures of lithium sodium and potassium?
The number of protons in lithium is 3, in sodium is 11 and in potassium is 19 whereas the mass number of lithium is 6.941 u, the mass number of sodium is 22.989769 u and the mass number of potassium is 39.0983 u.
What is the mass number of lithium, sodium, and potassium?Numbers of Protons:
The total number of protons in lithium is 3.
The total number of protons in sodium is 11.
The total number of protons in potassium is 19.
Mass Number:
The mass number of lithium is 6.941 u.
The mass number of sodium is 22.989769 u.
The mass number of potassium is 39.0983 u.
Structure of Lithium and Potassium:
Lithium and potassium have a similarity in them that they all have one electron in their outermost orbit.
Structure of Sodium and Potassium:
Sodium and potassium have a similarity in them that they all have one electron in their outermost orbit.
So we can conclude that the number of protons in lithium is 3, in sodium is 11 and in potassium is 19.
Learn more about Proton here: https://brainly.com/question/1805828
#SPJ1
Decomposers in the rainforest ___________ break down materials.
A:A. slowly
B:B. do not
C:C. quickly
D:D. rarely
Answer:
Quickly
Explanation:
You are asked to separate sand and sodium chloride name the methods needed to carry out the procedure. Explain how you would carry out the procedure to obtain pure sand and sodium chloride back.
Method: Filtration
Sodium chloride is your everyday common table salt! So it's just separating salt fro. Water!
Procedure: The mixture of salt and sand can be separated by filtration followed by an evaporation process. Filtration can separate sand from a combination of sand and salt solution (salt dissolved in water). Sand stays on the filter paper as a residue after filtering. By boiling the filtrate, common salt may now be produced. Boiling causes all of the water to evaporate, leaving just salt remaining. This is known as evaporation. Thus, this is how salt and sand are separated.
Density is defined as
Responses
A volume/massvolume/mass
B length to mass ratiolength to mass ratio
C mass to length ratiomass to length ratio
D mass/volumemass
Answer:
D. Density is defined as mass/volume.
Determine the energy of a photon whose frequency is 5.94x10^17Hz. Answer in units of J
Answer:
[tex] \huge{ 3.935 \times {10}^{ - 16} J}[/tex]
Explanation:
The energy of the photon can be found by using the formula
E = hf
where
E is the energy
f is the frequency
h is the Planck's constant which is
6.626 × 10-³⁴ Js
From the question the frequency is
5.94x10^17Hz
We have
[tex]E = 6.626 \times {10}^{ - 34} \times 5.94 \times {10}^{17} \\ = 3.935 \times {10}^{ - 16} J[/tex]
Hope this helps you
what is the proper definition of an isotope? group of answer choices atoms in which the number of protons is different from the number of neutrons. atoms with a mass number greater than the atomic number. atoms of an element with the same number of protons but different number of neutrons. atoms that spontaneously emit radiation.
Isotopes are atoms of an element with the same number of protons but a different number of neutrons.
Isotopes are different atom types that share the same atomic number and place in the periodic table but have different quantities of neutrons in their nuclei, resulting in various nucleon numbers or atomic masses.
Stable and unstable isotopes are the two basic categories of isotopes. 254 stable isotopes are known. Scientists refer to all synthetic (lab-made) isotopes as radioisotopes since they are radioactive due to their instability.
Examples of isotopes include carbon 12, which has 6 neutrons, carbon 13, which has 7 neutrons, and carbon 14, which has 8 neutrons. Carbon 14 is the radioactive isotope while the rest are stable.
To know more about isotopes, click on https://brainly.com/question/14220416
Density of 85mL of water
Since water served as the foundation for creating the metric system of measurement, density is defined as mass divided by volume (=m/v), meaning that one cubic centimeter (1cm3) of water weighs one gram (1g).
The density of pure water is what.The density of water is typically expressed in terms of grams per milliliter (1 g/ml) or grams per cubic centimeter (1 g/cm3).
85-milliliter outcome
2.988 Ounces
0.1868 Pounds
84.719 Grames
0.0847 Kilograms
Weight at 80°F(26.7°c)
As the temperature drops, the water becomes denser. Water density reaches its maximum at 4 degrees Celsius.
Like a solid, a liquid's density is determined by dividing its mass by its volume, or D = m/v. Water has an average density of one gram per cubic centimeter. No matter the size of the sample, a substance has a constant density.
To Learn more About density, Refer:
https://brainly.com/question/406690
#SPJ13
The half life for the decay of radium is 1620 years. What is the rate constant for this first-order process?.
The rate constant of the Decay of Radium with half life of 1620 years is 0.0004277/year.
We know, every radioactive reaction is a first order reaction.
So, it will follow the first order kinetics.
The half life of the radium sample is 1620 years.
We know, the standard formula for the half life of the first order reaction is,
T = 0.693/K
Where,
T is the half life of the reaction,
L is the rate constant of the reaction.
It is given that the half life of the reaction is 1620 years, so, putting all the values,
T = 0.693/K
K = 0.693/1620
K = 0.0004277/year.
So, the rate constant of the decay of radium is 0.0004277/year.
To know more about Rate constant, visit,
https://brainly.com/question/8813467
#SPJ4
While traveling, an airplane passenger placed a bag of potato chips in his checked luggage that was placed in the baggage compartment where the air was not regulated. When he opened the luggage after landing, the bag had exploded and potato chips were everywhere in his luggage. Which gas law does this describe?.
Flammable liquids and solids, such as lighter refills, lighter fuel, matches, paints, thinners, fire-lighters, lighters that must be inverted before ignition, matches (these may be carried on the person), radioactive material, briefcases, and attach cases with alarm devices installed.
Food items larger than 3.4 oz are not permitted in carry-on bags and should be stored in checked bags if possible. Food, powders, and other materials that can clog bags and obstruct clear images on the X-ray machine may be instructed to be separated from carry-on bags by TSA officers. Most passengers are permitted to bring one full-size carry-on bag and one personal item for free on their flight. There are some exceptions, such as customers traveling on Basic Economy tickets.
Learn more about flammable here-
https://brainly.com/question/28546033
#SPJ4
Answer:
Explanation:
Boyle's law was used when a traveller on a plane packed a bag of potato chips in his checked luggage and put it in the unventilated baggage hold. When the passenger opened the bag after landing, the bag exploded, and there were chips all over his luggage.
Why is Boyle’s law applicable to the airplane passenger?
Let's have a look at the link between pressure and height to better understand how the answer was arrived at.
Altitude increases cause a drop in pressure.
A particular surface has fewer air molecules above it at higher elevations than it does at lower elevations.
This indicates that the pressure is high at ground level and low at the airspace through which an airplane passes.
The gas in the sealed bag of potato chips had expanded, causing the bag to explode.
Given that it demonstrates the relationship between volume and pressure, this circumstance serves as an illustration of Boyle's law.
Basically, Boyle's law states that when pressure lowers, volume rises and vice versa.
What does Boyle’s law state?
If the temperature and amount of gas remain constant in a closed system, the absolute pressure exerted by a given mass of an ideal gas is inversely proportional to the volume it occupies.
To learn more about Boyle’s law visit:
https://brainly.com/question/1437490
#SPJ4
20 points for answer: D=m/v. Mass=30g and Volume=6mL
Answer:
density = 5 g/ml
Explanation:
D=m/v. Mass=30g and Volume=6mL
SO solve for D when m = 30 and v = 6
D=m/v
D = 30/6
density = 5 g/ml
What element is this? I am a yellowish gas with seven valence electrons that can kill. I am often used in disinfectants but never makes me with ammonia or you will get some nasty gases that can harm you.
The element that forms a yellowish gas, often used as a disinfectant, and forms a nasty gas with ammonia would be chlorine.
Properties of chlorineChlorine is an element with a valence electron of 7. It forms a greenish-yellow gas that is 2 to 5 times denser than air. The element belongs to a group of elements on the periodic table known as halogen.
Chlorine is used as a disinfectant. It is utilized in the treatment of water for domestic use. It has the ability to kill harmful microbes off surfaces. It is also used in the manufacturing of textile products, paper bleaching, and several other industrial uses.
Chemically, chlorine is highly reactive. It reacts with ammonia to form a toxic gas known as chloramine. The gas affects the throat, lungs, and eyes of humans and in high doses, can cause outright death.
Thus, the element in question that form yellowish gas, is used as a disinfectant, and forms nasty gas with ammonia would be chlorine.
More on chlorine can be found here: https://brainly.com/question/14962130
#SPJ1
boron has two naturally occurring isotopes: boron-10 (abundance 19.8%, mass 10.013 amu), boron-11 (abundance 80.2%, mass 11.009 amu). calculate the atomic mass of boron.
Answer:
Atomic mass of Boron: 10.8 amu
Explanation:
Boron-10: (0.198)(10.013) = 1.98 amu
Boron-11: (0.802)(11.009) = 8.83 amu
Add them up: 1.98+8.83= 10.8 amu
help me out please and thank you
The metals that are able to displace iron sulfate from solution are magnesium and aluminum.
What is the electrochemical series?The electrochemical series is a series that shows the reactivity of the metals. We must note that the order of the reactivity of the metals depends on the electrode potential of the metal. The metals that have a higher electrode potential would tend to react better and faster.
Also note that, the metals that are higher in the electrochemical series are able to displace the metals that are lower in the series from their aqueous solutions. This implies that if we add a metal to a solution that contains a meta that is lower in the electrochemical series, the lower meta is discharged from solution.
As we can see, when we add each of these metals to the iron sulfate solution, the only time that we would be able to have a reaction is when we add the aluminum or the magnesium metals.
Learn more about metals:https://brainly.com/question/18153051
#SPJ1
When sodium reacts with water.........gas evolves
(O2-CO2-H2-N2)
When sodium reacts with water, hydrogen gas evolves (option C).
What is a chemical reaction?A chemical reaction is a reaction that typically involves the breaking or making of interatomic bonds, in which one or more substances are changed into others.
A chemical reaction combines two or more substances called reactants to form new substances called products.
According to this question, sodium (Na) reacts with water (H2O) as follows:
2Na + 2H₂O → 2NaOH + H₂
As observed in the above chemical reaction, sodium metal reacts with water to produce sodium hydroxide and hydrogen gas.
Therefore, it can be said that hydrogen gas is evolved when sodium combines chemically with water.
Learn more about chemical reaction at: https://brainly.com/question/3461108
#SPJ1
if 250 ml of a 0.0193 m cacl2 solution is prepared, how many moles of cacl2 would 25 ml of this solution contain? a. 0.0193 moles b. 0.00193 moles c. 4.83x10-3 moles d. 4.83x10-4 moles
25 ml of the solution contains 4.83 x 10⁻⁴ moles of CaCl₂.
Concentration, or the amount of solute in a solution, can either be expressed in molarity, M, moles of solute per liter of solution, or molality, m, moles of solute per kilogram of solution.
The concentration of the CaCl₂ solution is 0.0193 M.
Hence, there are 0.0193 moles of CaCl₂ per liter of the solution.
M = 0.0193 M
volume of solution = 25 ml
Multiply the volume by the concentration to get the number of moles.
M = moles of solute / volume of solution
moles of solute = M (volume of solution)
moles of solute = 0.0193 M(25 ml)(1 L / 1000 ml)
moles of solute = 4.83 x 10⁻⁴
Learn more about molarity here: brainly.com/question/23243759
#SPJ4
The ground pigment in which painting material combines with a linseed oil vehicle and turpentine medium?.
Fresco is the ground pigment in which painting material combines with a linseed oil vehicle and turpentine medium.
Fresco is a type of ancient painting where color is applied to a wet lime plaster surface while being suspended in alkaline limewater. Fresco is not to be confused with a patina layer that is put on dried plaster or limewash. They are known as Secco applications. Fresco must be applied while the plaster is still damp and is only intended for use on pure lime plaster.
It cannot be applied to plaster that has dried, cement, lime with cement, or lime stucco (also referred to as lime stucco). The coloured limewater will carbonate with the wet plaster throughout the curing process after being applied to it, becoming a permanent part of the lime plaster surface. Fresco as a painting material can be utilized inside or outside.
Learn more about painting material here:
https://brainly.com/question/2392876
#SPJ4
3. Hydrogen peroxide forms gas bubbles when it is added to blood.
The other reaction product is water. Inserting a glowing splint
into a sample of this gas causes the splint to relight. 20
(a) Identify the gas.
(b) Classify the reaction.
(c) Write a balanced chemical equation for this reaction.
The gas is oxygen which causes the splint to relight and the reaction is of hydrogen peroxide resulting into water and oxygen.
Why hydrogen peroxide forms gas bubbles when it is added to blood?Hydrogen peroxide on reaction and decomposition releases water and oxygen .The reaction followed is something like this: 2H2O2= 2H2O + O2 , putting hydrogen peroxide on a cut.And the bubbles are actually symptomizing that the solution is killing bacteria that is it prevents bacteria to grow.And that solution is true solution which consist of various components in the reaction that is being done.Hence the gas is oxygen , and the reaction is 2H2O2= 2H2O + O2, and its the oxygen gas causing the splint to relight.To know more about hydrogen peroxide visit:
https://brainly.com/question/18709693
#SPJ13
What discovery proved Mendeleev's periodic table to be correct and Newlands' to be
wrong?
The discovery of protons and isotopes
The discovery of oxygen and nitrogen
The discovery of electron shells
The discovery of atomic weight
0/1
Answer: The discovery of protons and isotopes
Explanation: Mendeleev's arrangement by changing the criteria by which elements were arranged and assigned atomic numbers. Mendeleev arranged the periodic table based on the atomic mass of an atom of an element and its chemical properties.
What best describes a solution after it has cooled
Answer: A supersaturated